Re: [PATCH 03/10] thermal: exynos: remove dead code for HW_MODE calibration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Bartlomiej

On Mon, May 05, 2014 at 01:15:32PM +0200, Bartlomiej Zolnierkiewicz wrote:
> There should be no functional changes caused by this patch.
> 

Please provide better explanation when removing features. For instance,
based on the comment of commit introducing it, HW_MODE is a feature of
5540 samsung's SoC. Question is why now it is being removed?

commit 1928457ea6337043a06ca2acd9b4d01e75810a3f
Author: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
Date:   Mon Jun 24 16:20:46 2013 +0530

    thermal: exynos: Add hardware mode thermal calibration support
        
    This patch adds support for h/w mode calibration in the TMU controller.
    Soc's like 5440 support this features. The h/w bits needed for calibration
    setting are same as that of enum calibration_type.

  


Cheers,


> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> ---
>  drivers/thermal/samsung/exynos_tmu.c      | 33 +------------------------------
>  drivers/thermal/samsung/exynos_tmu.h      | 13 ------------
>  drivers/thermal/samsung/exynos_tmu_data.c |  3 ---
>  drivers/thermal/samsung/exynos_tmu_data.h |  2 --
>  4 files changed, 1 insertion(+), 50 deletions(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 0d96a51..9f2a5ee 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -76,9 +76,6 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
>  	struct exynos_tmu_platform_data *pdata = data->pdata;
>  	int temp_code;
>  
> -	if (pdata->cal_mode == HW_MODE)
> -		return temp;
> -
>  	if (data->soc == SOC_ARCH_EXYNOS4210)
>  		/* temp should range between 25 and 125 */
>  		if (temp < 25 || temp > 125) {
> @@ -113,9 +110,6 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
>  	struct exynos_tmu_platform_data *pdata = data->pdata;
>  	int temp;
>  
> -	if (pdata->cal_mode == HW_MODE)
> -		return temp_code;
> -
>  	if (data->soc == SOC_ARCH_EXYNOS4210)
>  		/* temp_code should range between 75 and 175 */
>  		if (temp_code < 75 || temp_code > 175) {
> @@ -164,9 +158,6 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>  	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
>  		__raw_writel(1, data->base + reg->triminfo_ctrl);
>  
> -	if (pdata->cal_mode == HW_MODE)
> -		goto skip_calib_data;
> -
>  	/* Save trimming info in order to perform calibration */
>  	if (data->soc == SOC_ARCH_EXYNOS5440) {
>  		/*
> @@ -202,7 +193,6 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>  			(pdata->efuse_value >> reg->triminfo_85_shift) &
>  			EXYNOS_TMU_TEMP_MASK;
>  
> -skip_calib_data:
>  	if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
>  		dev_err(&pdev->dev, "Invalid max trigger level\n");
>  		ret = -EINVAL;
> @@ -311,7 +301,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>  	struct exynos_tmu_platform_data *pdata = data->pdata;
>  	const struct exynos_tmu_registers *reg = pdata->registers;
> -	unsigned int con, interrupt_en, cal_val;
> +	unsigned int con, interrupt_en;
>  
>  	mutex_lock(&data->lock);
>  	clk_enable(data->clk);
> @@ -337,27 +327,6 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
>  		con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
>  	}
>  
> -	if (pdata->cal_mode == HW_MODE) {
> -		con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
> -		cal_val = 0;
> -		switch (pdata->cal_type) {
> -		case TYPE_TWO_POINT_TRIMMING:
> -			cal_val = 3;
> -			break;
> -		case TYPE_ONE_POINT_TRIMMING_85:
> -			cal_val = 2;
> -			break;
> -		case TYPE_ONE_POINT_TRIMMING_25:
> -			cal_val = 1;
> -			break;
> -		case TYPE_NONE:
> -			break;
> -		default:
> -			dev_err(&pdev->dev, "Invalid calibration type, using none\n");
> -		}
> -		con |= cal_val << reg->calib_mode_shift;
> -	}
> -
>  	if (on) {
>  		con |= (1 << reg->core_en_shift);
>  		interrupt_en =
> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> index 80dc899..e417af8 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -34,11 +34,6 @@ enum calibration_type {
>  	TYPE_NONE,
>  };
>  
> -enum calibration_mode {
> -	SW_MODE,
> -	HW_MODE,
> -};
> -
>  enum soc_type {
>  	SOC_ARCH_EXYNOS4210 = 1,
>  	SOC_ARCH_EXYNOS4412,
> @@ -92,10 +87,6 @@ enum soc_type {
>   * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl
>  	register.
>   * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register.
> - * @calib_mode_shift: shift bits of calibration mode value in tmu_ctrl
> -	register.
> - * @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl
> -	register.
>   * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register.
>   * @tmu_status: register drescribing the TMU status.
>   * @tmu_cur_temp: register containing the current temperature of the TMU.
> @@ -139,8 +130,6 @@ struct exynos_tmu_registers {
>  	u32	therm_trip_en_shift;
>  	u32	buf_slope_sel_shift;
>  	u32	buf_slope_sel_mask;
> -	u32	calib_mode_shift;
> -	u32	calib_mode_mask;
>  	u32	core_en_shift;
>  
>  	u32	tmu_status;
> @@ -222,7 +211,6 @@ struct exynos_tmu_registers {
>   * @default_temp_offset: default temperature offset in case of no trimming
>   * @test_mux; information if SoC supports test MUX
>   * @cal_type: calibration type for temperature
> - * @cal_mode: calibration mode for temperature
>   * @freq_clip_table: Table representing frequency reduction percentage.
>   * @freq_tab_count: Count of the above table as frequency reduction may
>   *	applicable to only some of the trigger levels.
> @@ -253,7 +241,6 @@ struct exynos_tmu_platform_data {
>  	u8 test_mux;
>  
>  	enum calibration_type cal_type;
> -	enum calibration_mode cal_mode;
>  	enum soc_type type;
>  	struct freq_clip_table freq_tab[4];
>  	unsigned int freq_tab_count;
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> index 36d64d6..4b992d9 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -205,8 +205,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
>  	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
>  	.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
>  	.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
> -	.calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
> -	.calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
>  	.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
>  	.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
>  	.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
> @@ -243,7 +241,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
>  	.reference_voltage = 16, \
>  	.noise_cancel_mode = 4, \
>  	.cal_type = TYPE_ONE_POINT_TRIMMING, \
> -	.cal_mode = 0, \
>  	.efuse_value = 0x5b2d, \
>  	.min_efuse_value = 16, \
>  	.max_efuse_value = 76, \
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index d4eeddb..1fed00d 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -60,8 +60,6 @@
>  #define EXYNOS_TMU_TRIP_MODE_SHIFT	13
>  #define EXYNOS_TMU_TRIP_MODE_MASK	0x7
>  #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT	12
> -#define EXYNOS_TMU_CALIB_MODE_SHIFT	4
> -#define EXYNOS_TMU_CALIB_MODE_MASK	0x3
>  
>  #define EXYNOS_TMU_INTEN_RISE0_SHIFT	0
>  #define EXYNOS_TMU_INTEN_RISE1_SHIFT	4
> -- 
> 1.8.2.3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux