Hi Tomasz,
On 05/14/2014 01:28 AM, Tomasz Figa wrote:
> Hi Chanwoo,
>
> On 13.05.2014 13:49, Chanwoo Choi wrote:
>> Hi Tomasz,
>>
>> On 04/26/2014 09:39 AM, Tomasz Figa wrote:
>>> Hi Chanwoo,
>>>
>>> On 25.04.2014 03:16, Chanwoo Choi wrote:
>>>> From: Tomasz Figa <t.figa@xxxxxxxxxxx>
>>>>
>>>> This patch add new the clock drvier of Exynos3250 SoC based on Cortex-A7
>>>> using common clock framework. The CMU (Clock Management Unit) of Exynos3250
>>>> control PLLs(Phase Locked Loops) and generate system clocks for CPU, buses,
>>>> and function clocks for individual IPs.
>>>>
>>>> The CMU of Exynos3250 includes following clock doamins:
>>>> - CPU block for Cortex-A7 MPCore processor
>>>> - LEFTBUS/RIGHTBUS block
>>>> - TOP block for G3D/MFC/LCD0/ISP/CAM/FSYS/MFC/PERIL/PERIR
>>>
>>> In original driver present in our internal tree I have separated several CMUs to account for certain factors caused by hardware design, which require such separation. Is there any reason why they were merged together into a single CMU again?
>>
>> This patch just include clocks in CMU clocks without CMU_DMC/CMU_ISP.
>> I'll send a further patches to support CMU_DMC/CMU_ISP after verifying it.
>>
>>>
>>>>
>>>> Cc: Mike Turquette <mturquette@xxxxxxxxxx>
>>>> Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
>>>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>>>> Cc: Pawel Moll <pawel.moll@xxxxxxx>
>>>> Cc: Mark Rutland <mark.rutland@xxxxxxx>
>>>> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
>>>> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
>>>> Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
>>>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>>>> Signed-off-by: Hyunhee Kim <hyunhee.kim@xxxxxxxxxxx>
>>>> Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
>>>> Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
>>>> Signed-off-by: Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx>
>>>> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
>>>> Signed-off-by: Karol Wrona <k.wrona@xxxxxxxxxxx>
>>>> Signed-off-by: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
>>>> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>>>> ---
>>>> drivers/clk/samsung/Makefile | 1 +
>>>> drivers/clk/samsung/clk-exynos3250.c | 785 +++++++++++++++++++++++++++++++++
>>>> include/dt-bindings/clock/exynos3250.h | 256 +++++++++++
>>>> 3 files changed, 1042 insertions(+)
>>>> create mode 100644 drivers/clk/samsung/clk-exynos3250.c
>>>> create mode 100644 include/dt-bindings/clock/exynos3250.h
>>>>
>>>> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
>>>> index 8eb4799..d120797 100644
>>>> --- a/drivers/clk/samsung/Makefile
>>>> +++ b/drivers/clk/samsung/Makefile
>>>> @@ -3,6 +3,7 @@
>>>> #
>>>>
>>>> obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
>>>> +obj-$(CONFIG_SOC_EXYNOS3250) += clk-exynos3250.o
>>>> obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
>>>> obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
>>>> obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
>>>> diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
>>>> new file mode 100644
>>>> index 0000000..0574a76
>>>> --- /dev/null
>>>> +++ b/drivers/clk/samsung/clk-exynos3250.c
>>>> @@ -0,0 +1,785 @@
>>>> +/*
>>>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License version 2 as
>>>> + * published by the Free Software Foundation.
>>>> + *
>>>> + * Common Clock Framework support for Exynos3250 SoC.
>>>> + */
>>>> +
>>>> +#include <linux/clk.h>
>>>> +#include <linux/clkdev.h>
>>>> +#include <linux/clk-provider.h>
>>>> +#include <linux/of.h>
>>>> +#include <linux/of_address.h>
>>>> +#include <linux/platform_device.h>
>>>> +#include <linux/syscore_ops.h>
>>>> +
>>>> +#include <dt-bindings/clock/exynos3250.h>
>>>> +
>>>> +#include "clk.h"
>>>> +#include "clk-pll.h"
>>>> +
>>>> +#define SRC_LEFTBUS 0x4200
>>>> +#define DIV_LEFTBUS 0x4500
>>>> +#define GATE_IP_LEFTBUS 0x4800
>>>> +#define SRC_RIGHTBUS 0x8200
>>>> +#define DIV_RIGHTBUS 0x8500
>>>> +#define GATE_IP_RIGHTBUS 0x8800
>>>> +#define GATE_IP_PERIR 0x8960
>>>> +#define MPLL_LOCK 0xc010
>>>> +#define MPLL_CON0 0xc110
>>>> +#define VPLL_LOCK 0xc020
>>>> +#define VPLL_CON0 0xc120
>>>> +#define UPLL_LOCK 0xc030
>>>> +#define UPLL_CON0 0xc130
>>>> +#define SRC_TOP0 0xc210
>>>> +#define SRC_TOP1 0xc214
>>>> +#define SRC_CAM 0xc220
>>>> +#define SRC_MFC 0xc228
>>>> +#define SRC_G3D 0xc22c
>>>> +#define SRC_LCD 0xc234
>>>> +#define SRC_ISP 0xc238
>>>> +#define SRC_FSYS 0xc240
>>>> +#define SRC_PERIL0 0xc250
>>>> +#define SRC_PERIL1 0xc254
>>>> +#define SRC_MASK_TOP 0xc310
>>>> +#define SRC_MASK_CAM 0xc320
>>>> +#define SRC_MASK_LCD 0xc334
>>>> +#define SRC_MASK_ISP 0xc338
>>>> +#define SRC_MASK_FSYS 0xc340
>>>> +#define SRC_MASK_PERIL0 0xc350
>>>> +#define SRC_MASK_PERIL1 0xc354
>>>> +#define DIV_TOP 0xc510
>>>> +#define DIV_CAM 0xc520
>>>> +#define DIV_MFC 0xc528
>>>> +#define DIV_G3D 0xc52c
>>>> +#define DIV_LCD 0xc534
>>>> +#define DIV_ISP 0xc538
>>>> +#define DIV_FSYS0 0xc540
>>>> +#define DIV_FSYS1 0xc544
>>>> +#define DIV_FSYS2 0xc548
>>>> +#define DIV_PERIL0 0xc550
>>>> +#define DIV_PERIL1 0xc554
>>>> +#define DIV_PERIL3 0xc55c
>>>> +#define DIV_PERIL4 0xc560
>>>> +#define DIV_PERIL5 0xc564
>>>> +#define DIV_CAM1 0xc568
>>>> +#define CLKDIV2_RATIO 0xc580
>>>> +#define GATE_SCLK_CAM 0xc820
>>>> +#define GATE_SCLK_MFC 0xc828
>>>> +#define GATE_SCLK_G3D 0xc82c
>>>> +#define GATE_SCLK_LCD 0xc834
>>>> +#define GATE_SCLK_ISP_TOP 0xc838
>>>> +#define GATE_SCLK_FSYS 0xc840
>>>> +#define GATE_SCLK_PERIL 0xc850
>>>> +#define GATE_IP_CAM 0xc920
>>>> +#define GATE_IP_MFC 0xc928
>>>> +#define GATE_IP_G3D 0xc92c
>>>> +#define GATE_IP_LCD 0xc934
>>>> +#define GATE_IP_ISP 0xc938
>>>> +#define GATE_IP_FSYS 0xc940
>>>> +#define GATE_IP_PERIL 0xc950
>>>> +#define GATE_BLOCK 0xc970
>>>> +#define APLL_LOCK 0x14000
>>>> +#define APLL_CON0 0x14100
>>>> +#define SRC_CPU 0x14200
>>>> +#define DIV_CPU0 0x14500
>>>> +#define DIV_CPU1 0x14504
>>>> +
>>>> +/* list of PLLs to be registered */
>>>> +enum exynos3250_plls {
>>>> + apll, mpll, vpll, upll,
>>>> + nr_plls
>>>> +};
>>>> +
>>>> +void __iomem *reg_base;
>>>
>>> static void
>>
>> I'll fix it.
>>
>
> OK.
>
>>>
>>>> +
>>>> +/*
>>>> + * Support for CMU save/restore across system suspends
>>>> + */
>>>> +#ifdef CONFIG_PM_SLEEP
>>>> +static struct samsung_clk_reg_dump *exynos3250_clk_regs;
>>>> +
>>>> +static unsigned long exynos3250_cmu_clk_regs[] __initdata = {
>>>> + SRC_LEFTBUS,
>>>> + DIV_LEFTBUS,
>>>> + GATE_IP_LEFTBUS,
>>>> + SRC_RIGHTBUS,
>>>> + DIV_RIGHTBUS,
>>>> + GATE_IP_RIGHTBUS,
>>>> + GATE_IP_PERIR,
>>>> + MPLL_LOCK,
>>>> + MPLL_CON0,
>>>> + VPLL_LOCK,
>>>> + VPLL_CON0,
>>>> + UPLL_LOCK,
>>>> + UPLL_CON0,
>>>> + SRC_TOP0,
>>>> + SRC_TOP1,
>>>> + SRC_CAM,
>>>> + SRC_MFC,
>>>> + SRC_G3D,
>>>> + SRC_LCD,
>>>> + SRC_ISP,
>>>> + SRC_FSYS,
>>>> + SRC_PERIL0,
>>>> + SRC_PERIL1,
>>>> + SRC_MASK_TOP,
>>>> + SRC_MASK_CAM,
>>>> + SRC_MASK_LCD,
>>>> + SRC_MASK_ISP,
>>>> + SRC_MASK_FSYS,
>>>> + SRC_MASK_PERIL0,
>>>> + SRC_MASK_PERIL1,
>>>> + DIV_TOP,
>>>> + DIV_CAM,
>>>> + DIV_MFC,
>>>> + DIV_G3D,
>>>> + DIV_LCD,
>>>> + DIV_ISP,
>>>> + DIV_FSYS0,
>>>> + DIV_FSYS1,
>>>> + DIV_FSYS2,
>>>> + DIV_PERIL0,
>>>> + DIV_PERIL1,
>>>> + DIV_PERIL3,
>>>> + DIV_PERIL4,
>>>> + DIV_PERIL5,
>>>> + DIV_CAM1,
>>>> + CLKDIV2_RATIO,
>>>> + GATE_SCLK_CAM,
>>>> + GATE_SCLK_MFC,
>>>> + GATE_SCLK_G3D,
>>>> + GATE_SCLK_LCD,
>>>> + GATE_SCLK_ISP_TOP,
>>>> + GATE_SCLK_FSYS,
>>>> + GATE_SCLK_PERIL,
>>>> + GATE_IP_CAM,
>>>> + GATE_IP_MFC,
>>>> + GATE_IP_G3D,
>>>> + GATE_IP_LCD,
>>>> + GATE_IP_ISP,
>>>> + GATE_IP_FSYS,
>>>> + GATE_IP_PERIL,
>>>> + GATE_BLOCK,
>>>> + APLL_LOCK,
>>>> + SRC_CPU,
>>>> + DIV_CPU0,
>>>> + DIV_CPU1,
>>>> +};
>>>> +
>>>> +static int exynos3250_clk_suspend(void)
>>>> +{
>>>> + samsung_clk_save(reg_base, exynos3250_clk_regs,
>>>> + ARRAY_SIZE(exynos3250_cmu_clk_regs));
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void exynos3250_clk_resume(void)
>>>> +{
>>>> + samsung_clk_restore(reg_base, exynos3250_clk_regs,
>>>> + ARRAY_SIZE(exynos3250_cmu_clk_regs));
>>>> +}
>>>> +
>>>> +static struct syscore_ops exynos3250_clk_syscore_ops = {
>>>> + .suspend = exynos3250_clk_suspend,
>>>> + .resume = exynos3250_clk_resume,
>>>> +};
>>>> +
>>>> +static void exynos3250_clk_sleep_init(void)
>>>> +{
>>>> + exynos3250_clk_regs =
>>>> + samsung_clk_alloc_reg_dump(exynos3250_cmu_clk_regs,
>>>> + ARRAY_SIZE(exynos3250_cmu_clk_regs));
>>>> + if (!exynos3250_clk_regs) {
>>>> + pr_warn("%s: Failed to allocate sleep save data\n", __func__);
>>>> + goto err;
>>>> + }
>>>> +
>>>> + register_syscore_ops(&exynos3250_clk_syscore_ops);
>>>> + return;
>>>> +err:
>>>> + kfree(exynos3250_clk_regs);
>>>> +}
>>>> +#else
>>>> +static inline void exynos3250_clk_sleep_init(void) { }
>>>> +#endif
>>>> +
>>>> +/* list of all parent clock list */
>>>> +PNAME(mout_vpllsrc_p) = { "fin_pll", };
>>>> +
>>>> +PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
>>>> +PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", };
>>>> +PNAME(mout_vpll_p) = { "fin_pll", "fout_vpll", };
>>>> +PNAME(mout_upll_p) = { "fin_pll", "fout_upll", };
>>>> +
>>>> +PNAME(mout_mpll_user_p) = { "fin_pll", "div_mpll_pre", };
>>>> +PNAME(mout_epll_user_p) = { "fin_pll", "mout_epll", };
>>>> +PNAME(mout_core_p) = { "mout_apll", "mout_mpll_user_c", };
>>>> +PNAME(mout_hpm_p) = { "mout_apll", "mout_mpll_user_c", };
>>>> +
>>>> +PNAME(mout_ebi_p) = { "div_aclk_200", "div_aclk_160", };
>>>> +PNAME(mout_ebi_1_p) = { "mout_ebi", "mout_vpll", };
>>>> +
>>>> +PNAME(mout_gdl_p) = { "mout_mpll_user_l", };
>>>> +PNAME(mout_gdr_p) = { "mout_mpll_user_r", };
>>>> +
>>>> +PNAME(mout_aclk_400_mcuisp_sub_p)
>>>> + = { "fin_pll", "div_aclk_400_mcuisp", };
>>>> +PNAME(mout_aclk_266_0_p) = { "div_mpll_pre", "mout_vpll", };
>>>> +PNAME(mout_aclk_266_1_p) = { "mout_epll_user", };
>>>> +PNAME(mout_aclk_266_p) = { "mout_aclk_266_0", "mout_aclk_266_1", };
>>>> +PNAME(mout_aclk_266_sub_p) = { "fin_pll", "div_aclk_266", };
>>>> +
>>>> +PNAME(group_div_mpll_pre_p) = { "div_mpll_pre", };
>>>> +PNAME(group_epll_vpll_p) = { "mout_epll_user", "mout_vpll" };
>>>> +PNAME(group_sclk_p) = { "xxti", "xusbxti",
>>>> + "none", "none",
>>>> + "none", "none", "div_mpll_pre",
>>>> + "mout_epll_user", "mout_vpll", };
>>>> +PNAME(group_sclk_audio_p) = { "audiocdclk", "none",
>>>> + "none", "none",
>>>> + "xxti", "xusbxti",
>>>> + "div_mpll_pre", "mout_epll_user",
>>>> + "mout_vpll", };
>>>> +PNAME(group_sclk_cam_blk_p) = { "xxti", "xusbxti",
>>>> + "none", "none", "none",
>>>> + "none", "div_mpll_pre",
>>>> + "mout_epll_user", "mout_vpll",
>>>> + "div_cam_blk_320", };
>>>> +PNAME(group_sclk_fimd0_p) = { "xxti", "xusbxti",
>>>> + "m_bitclkhsdiv4_2l", "none",
>>>> + "none", "none", "div_mpll_pre",
>>>> + "mout_epll_user", "mout_vpll",
>>>> + "none", "none", "none",
>>>> + "div_lcd_blk_145", };
>>>> +
>>>> +PNAME(mout_mfc_p) = { "mout_mfc_0", "mout_mfc_1" };
>>>> +PNAME(mout_g3d_p) = { "mout_g3d_0", "mout_g3d_1" };
>>>> +
>>>> +static struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = {
>>>> +};
>>>
>>> Any reason to have this empty array at all?
>>
>> OK, I'll delete empty array.
>>
>
> OK.
>
>>>
>>>> +
>>>> +static struct samsung_fixed_factor_clock fixed_factor_clks[] __initdata = {
>>>> + FFACTOR(0, "sclk_mpll_1600", "mout_mpll", 1, 1, 0),
>>>> + FFACTOR(0, "sclk_mpll_mif", "mout_mpll", 1, 2, 0),
>>>> + FFACTOR(0, "sclk_bpll", "fout_bpll", 1, 2, 0),
>>>> + FFACTOR(0, "div_cam_blk_320", "sclk_mpll_1600", 1, 5, 0),
>>>> + FFACTOR(0, "div_lcd_blk_145", "sclk_mpll_1600", 1, 11, 0),
>>>> +
>>>> + FFACTOR(CLK_FIN_PLL, "fin_pll", "xusbxti", 1, 1, 0),
>>>
>>> This is a hack. The real "fin_pll" is a mux driven by XOM pin which selects which clock input is used as main system oscillator. It should be implemented properly in this driver or at least appropriate comment should be added stressing the fact that it is a hack.
>>
>> OK, I'll add comment about it and if you ok, I'll send a further patchset to set relation
>> between fin_pll and xusbxti/xxti by reading XOM pin of chipid register.
>>
>
> OK.
>
>>>
>>>> +};
>>>> +
>>>> +static struct samsung_mux_clock mux_clks[] __initdata = {
>>>> + /*
>>>> + * NOTE: Following table is sorted by register address in ascending
>>>> + * order and then bitfield shift in descending order, as it is done
>>>> + * in the User's Manual. When adding new entries, please make sure
>>>> + * that the order is preserved, to avoid merge conflicts and make
>>>> + * further work with defined data easier.
>>>> + */
>>>> +
>>>> + /* SRC_LEFTBUS */
>>>> + MUX(CLK_MOUT_MPLL_USER_L, "mout_mpll_user_l", mout_mpll_user_p,
>>>> + SRC_LEFTBUS, 4, 1),
>>>> + MUX(CLK_MOUT_GDL, "mout_gdl", mout_gdl_p, SRC_LEFTBUS, 0, 1),
>>>> +
>>>> + /* SRC_RIGHTBUS */
>>>> + MUX(CLK_MOUT_MPLL_USER_R, "mout_mpll_user_r", mout_mpll_user_p,
>>>> + SRC_RIGHTBUS, 4, 1),
>>>> + MUX(CLK_MOUT_GDR, "mout_gdr", mout_gdr_p, SRC_RIGHTBUS, 0, 1),
>>>> +
>>>> + /* SRC_TOP0 */
>>>> + MUX(CLK_MOUT_EBI, "mout_ebi", mout_ebi_p, SRC_TOP0, 28, 1),
>>>> + MUX(CLK_MOUT_ACLK_200, "mout_aclk_200", group_div_mpll_pre_p,SRC_TOP0, 24, 1),
>>>> + MUX(CLK_MOUT_ACLK_160, "mout_aclk_160", group_div_mpll_pre_p, SRC_TOP0, 20, 1),
>>>> + MUX(CLK_MOUT_ACLK_100, "mout_aclk_100", group_div_mpll_pre_p, SRC_TOP0, 16, 1),
>>>> + MUX(CLK_MOUT_ACLK_266_1, "mout_aclk_266_1", mout_aclk_266_1_p, SRC_TOP0, 14, 1),
>>>> + MUX(CLK_MOUT_ACLK_266_0, "mout_aclk_266_0", mout_aclk_266_0_p, SRC_TOP0, 13, 1),
>>>> + MUX(CLK_MOUT_ACLK_266, "mout_aclk_266", mout_aclk_266_p, SRC_TOP0, 12, 1),
>>>> + MUX(CLK_MOUT_VPLL, "mout_vpll", mout_vpll_p, SRC_TOP0, 8, 1),
>>>> + MUX(CLK_MOUT_EPLL_USER, "mout_epll_user", mout_epll_user_p, SRC_TOP0, 4, 1),
>>>> + MUX(CLK_MOUT_EBI_1, "mout_ebi_1", mout_ebi_1_p, SRC_TOP0, 0, 1),
>>>> +
>>>> + /* SRC_TOP1 */
>>>> + MUX(CLK_MOUT_UPLL, "mout_upll", mout_upll_p, SRC_TOP1, 28, 1),
>>>> + MUX(CLK_MOUT_ACLK_400_MCUISP_SUB, "mout_aclk_400_mcuisp_sub", mout_aclk_400_mcuisp_sub_p,
>>>> + SRC_TOP1, 24, 1),
>>>> + MUX(CLK_MOUT_ACLK_266_SUB, "mout_aclk_266_sub", mout_aclk_266_sub_p, SRC_TOP1, 20, 1),
>>>> + MUX(CLK_MOUT_MPLL, "mout_mpll", mout_mpll_p, SRC_TOP1, 12, 1),
>>>> + MUX(CLK_MOUT_ACLK_400_MCUISP, "mout_aclk_400_mcuisp", group_div_mpll_pre_p, SRC_TOP1, 8, 1),
>>>> + MUX(CLK_MOUT_VPLLSRC, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1),
>>>> +
>>>> + /* SRC_CAM */
>>>> + MUX(CLK_MOUT_CAM1, "mout_cam1", group_sclk_p, SRC_CAM, 20, 4),
>>>> + MUX(CLK_MOUT_CAM_BLK, "mout_cam_blk", group_sclk_cam_blk_p, SRC_CAM, 0, 4),
>>>> +
>>>> + /* SRC_MFC */
>>>> + MUX(CLK_MOUT_MFC, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
>>>> + MUX(CLK_MOUT_MFC_1, "mout_mfc_1", group_epll_vpll_p, SRC_MFC, 4, 1),
>>>> + MUX(CLK_MOUT_MFC_0, "mout_mfc_0", group_div_mpll_pre_p, SRC_MFC, 0, 1),
>>>> +
>>>> + /* SRC_G3D */
>>>> + MUX(CLK_MOUT_G3D, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1),
>>>> + MUX(CLK_MOUT_G3D_1, "mout_g3d_1", group_epll_vpll_p, SRC_G3D, 4, 1),
>>>> + MUX(CLK_MOUT_G3D_0, "mout_g3d_0", group_div_mpll_pre_p, SRC_G3D, 0, 1),
>>>> +
>>>> + /* SRC_LCD */
>>>> + MUX(CLK_MOUT_MIPI0, "mout_mipi0", group_sclk_p, SRC_LCD, 12, 4),
>>>> + MUX(CLK_MOUT_FIMD0, "mout_fimd0", group_sclk_fimd0_p, SRC_LCD, 0, 4),
>>>> +
>>>> + /* SRC_ISP */
>>>> + MUX(CLK_MOUT_UART_ISP, "mout_uart_isp", group_sclk_p, SRC_ISP, 12, 4),
>>>> + MUX(CLK_MOUT_SPI1_ISP, "mout_spi1_isp", group_sclk_p, SRC_ISP, 8, 4),
>>>> + MUX(CLK_MOUT_SPI0_ISP, "mout_spi0_isp", group_sclk_p, SRC_ISP, 4, 4),
>>>> +
>>>> + /* SRC_FSYS */
>>>> + MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4),
>>>> + MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3),
>>>> + MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3),
>>>> +
>>>> + /* SRC_PERIL0 */
>>>> + MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
>>>> + MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
>>>> +
>>>> + /* SRC_PERIL1 */
>>>> + MUX(CLK_MOUT_SPI1, "mout_spi1", group_sclk_p, SRC_PERIL1, 20, 4),
>>>> + MUX(CLK_MOUT_SPI0, "mout_spi0", group_sclk_p, SRC_PERIL1, 16, 4),
>>>> + MUX(CLK_MOUT_AUDIO, "mout_audio", group_sclk_audio_p, SRC_PERIL1, 4, 4),
>>>> +
>>>> + /* SRC_CPU */
>>>> + MUX(CLK_MOUT_MPLL_USER_C, "mout_mpll_user_c", mout_mpll_user_p,
>>>> + SRC_CPU, 24, 1),
>>>> + MUX(CLK_MOUT_HPM, "mout_hpm", mout_hpm_p, SRC_CPU, 20, 1),
>>>> + MUX(CLK_MOUT_CORE, "mout_core", mout_core_p, SRC_CPU, 16, 1),
>>>> + MUX(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
>>>> +};
>>>> +
>>>> +static struct samsung_div_clock div_clks[] __initdata = {
>>>> + /*
>>>> + * NOTE: Following table is sorted by register address in ascending
>>>> + * order and then bitfield shift in descending order, as it is done
>>>> + * in the User's Manual. When adding new entries, please make sure
>>>> + * that the order is preserved, to avoid merge conflicts and make
>>>> + * further work with defined data easier.
>>>> + */
>>>> +
>>>> + /* DIV_LEFTBUS */
>>>> + DIV(CLK_DIV_GPL, "div_gpl", "div_gdl", DIV_LEFTBUS, 4, 3),
>>>> + DIV(CLK_DIV_GDL, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 4),
>>>> +
>>>> + /* DIV_RIGHTBUS */
>>>> + DIV(CLK_DIV_GPR, "div_gpr", "div_gdr", DIV_RIGHTBUS, 4, 3),
>>>> + DIV(CLK_DIV_GDR, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 4),
>>>> +
>>>> + /* DIV_TOP */
>>>> + DIV(CLK_DIV_MPLL_PRE, "div_mpll_pre", "sclk_mpll_mif", DIV_TOP, 28, 2),
>>>> + DIV(CLK_DIV_ACLK_400_MCUISP, "div_aclk_400_mcuisp",
>>>> + "mout_aclk_400_mcuisp", DIV_TOP, 24, 3),
>>>> + DIV(CLK_DIV_EBI, "div_ebi", "mout_ebi_1", DIV_TOP, 16, 3),
>>>> + DIV(CLK_DIV_ACLK_200, "div_aclk_200", "mout_aclk_200", DIV_TOP, 12, 3),
>>>> + DIV(CLK_DIV_ACLK_160, "div_aclk_160", "mout_aclk_160", DIV_TOP, 8, 3),
>>>> + DIV(CLK_DIV_ACLK_100, "div_aclk_100", "mout_aclk_100", DIV_TOP, 4, 4),
>>>> + DIV(CLK_DIV_ACLK_266, "div_aclk_266", "mout_aclk_266", DIV_TOP, 0, 3),
>>>> +
>>>> + /* DIV_CAM */
>>>> + DIV(CLK_DIV_CAM1, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
>>>> + DIV(CLK_DIV_CAM_BLK, "div_cam_blk", "mout_cam_blk", DIV_CAM, 0, 4),
>>>> +
>>>> + /* DIV_MFC */
>>>> + DIV(CLK_DIV_MFC, "div_mfc", "mout_mfc", DIV_MFC, 0, 4),
>>>> +
>>>> + /* DIV_G3D */
>>>> + DIV(CLK_DIV_G3D, "div_g3d", "mout_g3d", DIV_G3D, 0, 4),
>>>> +
>>>> + /* DIV_LCD */
>>>> + DIV_F(CLK_DIV_MIPI0_PRE, "div_mipi0_pre", "div_mipi0", DIV_LCD, 20, 4,
>>>> + CLK_SET_RATE_PARENT, 0),
>>>> + DIV(CLK_DIV_MIPI0, "div_mipi0", "mout_mipi0", DIV_LCD, 16, 4),
>>>> + DIV(CLK_DIV_FIMD0, "div_fimd0", "mout_fimd0", DIV_LCD, 0, 4),
>>>> +
>>>> + /* DIV_ISP */
>>>> + DIV(CLK_DIV_UART_ISP, "div_uart_isp", "mout_uart_isp", DIV_ISP, 28, 4),
>>>> + DIV_F(CLK_DIV_SPI1_ISP_PRE, "div_spi1_isp_pre", "div_spi1_isp",
>>>> + DIV_ISP, 20, 8, CLK_SET_RATE_PARENT, 0),
>>>> + DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4),
>>>> + DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp",
>>>> + DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0),
>>>> + DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4),
>>>> +
>>>> + /* DIV_FSYS0 */
>>>> + DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8,
>>>> + CLK_SET_RATE_PARENT, 0),
>>>> + DIV(CLK_DIV_TSADC, "div_tsadc", "mout_tsadc", DIV_FSYS0, 0, 4),
>>>> +
>>>> + /* DIV_FSYS1 */
>>>> + DIV_F(CLK_DIV_MMC1_PRE, "div_mmc1_pre", "div_mmc1", DIV_FSYS1, 24, 8,
>>>> + CLK_SET_RATE_PARENT, 0),
>>>> + DIV(CLK_DIV_MMC1, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
>>>> + DIV_F(CLK_DIV_MMC0_PRE, "div_mmc0_pre", "div_mmc0", DIV_FSYS1, 8, 8,
>>>> + CLK_SET_RATE_PARENT, 0),
>>>> + DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
>>>> +
>>>> + /* DIV_PERIL0 */
>>>> + DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
>>>> + DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
>>>> +
>>>> + /* DIV_PERIL1 */
>>>> + DIV_F(CLK_DIV_SPI1_PRE, "div_spi1_pre", "div_spi1", DIV_PERIL1, 24, 8,
>>>> + CLK_SET_RATE_PARENT, 0),
>>>> + DIV(CLK_DIV_SPI1, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
>>>> + DIV_F(CLK_DIV_SPI0_PRE, "div_spi0_pre", "div_spi0", DIV_PERIL1, 8, 8,
>>>> + CLK_SET_RATE_PARENT, 0),
>>>> + DIV(CLK_DIV_SPI0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
>>>> +
>>>> + /* DIV_PERIL4 */
>>>> + DIV(CLK_DIV_PCM, "div_pcm", "div_audio", DIV_PERIL4, 20, 8),
>>>> + DIV(CLK_DIV_AUDIO, "div_audio", "mout_audio", DIV_PERIL4, 16, 4),
>>>> +
>>>> + /* DIV_PERIL5 */
>>>> + DIV(CLK_DIV_I2S, "div_i2s", "div_audio", DIV_PERIL5, 8, 6),
>>>> +
>>>> + /* DIV_CPU0 */
>>>> + DIV(CLK_DIV_CORE2, "div_core2", "div_core", DIV_CPU0, 28, 3),
>>>> + DIV(CLK_DIV_APLL, "div_apll", "mout_apll", DIV_CPU0, 24, 3),
>>>> + DIV(CLK_DIV_PCLK_DBG, "div_pclk_dbg", "div_core2", DIV_CPU0, 20, 3),
>>>> + DIV(CLK_DIV_ATB, "div_atb", "div_core2", DIV_CPU0, 16, 3),
>>>> + DIV(CLK_DIV_COREM, "div_corem", "div_core2", DIV_CPU0, 4, 3),
>>>> + DIV(CLK_DIV_CORE, "div_core", "mout_core", DIV_CPU0, 0, 3),
>>>> +
>>>> + /* DIV_CPU1 */
>>>> + DIV(CLK_DIV_HPM, "div_hpm", "div_copy", DIV_CPU1, 4, 3),
>>>> + DIV(CLK_DIV_COPY, "div_copy", "mout_hpm", DIV_CPU1, 0, 3),
>>>> +};
>>>> +
>>>> +static struct samsung_gate_clock gate_clks[] __initdata = {
>>>> + /*
>>>> + * NOTE: Following table is sorted by register address in ascending
>>>> + * order and then bitfield shift in descending order, as it is done
>>>> + * in the User's Manual. When adding new entries, please make sure
>>>> + * that the order is preserved, to avoid merge conflicts and make
>>>> + * further work with defined data easier.
>>>> + */
>>>> +
>>>> + /* GATE_IP_LEFTBUS */
>>>> + GATE(CLK_ASYNC_G3D, "async_g3d", "div_aclk_100", GATE_IP_LEFTBUS, 6,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_ASYNC_MFCL, "async_mfcl", "div_aclk_100", GATE_IP_LEFTBUS, 4,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PPMULEFT, "ppmuleft", "div_aclk_100", GATE_IP_LEFTBUS, 1,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_GPIO_LEFT, "gpio_left", "div_aclk_100", GATE_IP_LEFTBUS, 0,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> +
>>>> + /* GATE_IP_RIGHTBUS */
>>>> + GATE(CLK_ASYNC_ISPMX, "async_ispmx", "div_aclk_100",
>>>> + GATE_IP_RIGHTBUS, 9, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_ASYNC_FSYSD, "async_fsysd", "div_aclk_100",
>>>> + GATE_IP_RIGHTBUS, 5, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_ASYNC_LCD0X, "async_lcd0x", "div_aclk_100",
>>>> + GATE_IP_RIGHTBUS, 3, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_ASYNC_CAMX, "async_camx", "div_aclk_100", GATE_IP_RIGHTBUS, 2,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PPMURIGHT, "ppmuright", "div_aclk_100", GATE_IP_RIGHTBUS, 1,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_GPIO_RIGHT, "gpio_right", "div_aclk_100", GATE_IP_RIGHTBUS, 0,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> +
>>>> + /* GATE_IP_PERIR */
>>>> + GATE(CLK_MONOCNT, "monocnt", "div_aclk_100", GATE_IP_PERIR, 22,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_TZPC6, "tzpc6", "div_aclk_100", GATE_IP_PERIR, 21,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PROVISIONKEY1, "provisionkey1", "div_aclk_100",
>>>> + GATE_IP_PERIR, 20, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PROVISIONKEY0, "provisionkey0", "div_aclk_100",
>>>> + GATE_IP_PERIR, 19, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_CMU_ISPPART, "cmu_isppart", "div_aclk_100", GATE_IP_PERIR, 18,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_TMU_APBIF, "tmu_apbif", "div_aclk_100",
>>>> + GATE_IP_PERIR, 17, 0, 0),
>>>> + GATE(CLK_KEYIF, "keyif", "div_aclk_100", GATE_IP_PERIR, 16, 0, 0),
>>>> + GATE(CLK_RTC, "rtc", "div_aclk_100", GATE_IP_PERIR, 15, 0, 0),
>>>> + GATE(CLK_WDT, "wdt", "div_aclk_100", GATE_IP_PERIR, 14, 0, 0),
>>>> + GATE(CLK_MCT, "mct", "div_aclk_100", GATE_IP_PERIR, 13, 0, 0),
>>>> + GATE(CLK_SECKEY, "seckey", "div_aclk_100", GATE_IP_PERIR, 12,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_TZPC5, "tzpc5", "div_aclk_100", GATE_IP_PERIR, 10,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_TZPC4, "tzpc4", "div_aclk_100", GATE_IP_PERIR, 9,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_TZPC3, "tzpc3", "div_aclk_100", GATE_IP_PERIR, 8,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_TZPC2, "tzpc2", "div_aclk_100", GATE_IP_PERIR, 7,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_TZPC1, "tzpc1", "div_aclk_100", GATE_IP_PERIR, 6,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_TZPC0, "tzpc0", "div_aclk_100", GATE_IP_PERIR, 5,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_CMU_COREPART, "cmu_corepart", "div_aclk_100", GATE_IP_PERIR, 4,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_CMU_TOPPART, "cmu_toppart", "div_aclk_100", GATE_IP_PERIR, 3,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PMU_APBIF, "pmu_apbif", "div_aclk_100", GATE_IP_PERIR, 2,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_SYSREG, "sysreg", "div_aclk_100", GATE_IP_PERIR, 1,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_CHIP_ID, "chip_id", "div_aclk_100", GATE_IP_PERIR, 0,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> +
>>>> + /* GATE_SCLK_CAM */
>>>> + GATE(CLK_SCLK_JPEG, "sclk_jpeg", "div_cam_blk",
>>>> + GATE_SCLK_CAM, 8, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_M2MSCALER, "sclk_m2mscaler", "div_cam_blk",
>>>> + GATE_SCLK_CAM, 2, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_GSCALER1, "sclk_gscaler1", "div_cam_blk",
>>>> + GATE_SCLK_CAM, 1, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_GSCALER0, "sclk_gscaler0", "div_cam_blk",
>>>> + GATE_SCLK_CAM, 0, CLK_SET_RATE_PARENT, 0),
>>>> +
>>>> + /* GATE_SCLK_MFC */
>>>> + GATE(CLK_SCLK_MFC, "sclk_mfc", "div_mfc",
>>>> + GATE_SCLK_MFC, 0, CLK_SET_RATE_PARENT, 0),
>>>> +
>>>> + /* GATE_SCLK_G3D */
>>>> + GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d",
>>>> + GATE_SCLK_G3D, 0, CLK_SET_RATE_PARENT, 0),
>>>> +
>>>> + /* GATE_SCLK_LCD */
>>>> + GATE(CLK_SCLK_MIPIDPHY2L, "sclk_mipidphy2l", "div_mipi0",
>>>> + GATE_SCLK_LCD, 4, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_MIPI0, "sclk_mipi0", "div_mipi0_pre",
>>>> + GATE_SCLK_LCD, 3, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_FIMD0, "sclk_fimd0", "div_fimd0",
>>>> + GATE_SCLK_LCD, 0, CLK_SET_RATE_PARENT, 0),
>>>> +
>>>> + /* GATE_SCLK_ISP_TOP */
>>>> + GATE(CLK_SCLK_CAM1, "sclk_cam1", "div_cam1",
>>>> + GATE_SCLK_ISP_TOP, 4, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp",
>>>> + GATE_SCLK_ISP_TOP, 3, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp",
>>>> + GATE_SCLK_ISP_TOP, 2, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp",
>>>> + GATE_SCLK_ISP_TOP, 1, CLK_SET_RATE_PARENT, 0),
>>>> +
>>>> + /* GATE_SCLK_FSYS */
>>>> + GATE(CLK_SCLK_UPLL, "sclk_upll", "mout_upll", GATE_SCLK_FSYS, 10, 0, 0),
>>>> + GATE(CLK_SCLK_TSADC, "sclk_tsadc", "div_tsadc_pre",
>>>> + GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi",
>>>> + GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre",
>>>> + GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre",
>>>> + GATE_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
>>>> +
>>>> + /* GATE_SCLK_PERIL */
>>>> + GATE(CLK_SCLK_I2S, "sclk_i2s", "div_i2s",
>>>> + GATE_SCLK_PERIL, 18, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_PCM, "sclk_pcm", "div_pcm",
>>>> + GATE_SCLK_PERIL, 16, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_SPI1, "sclk_spi1", "div_spi1_pre",
>>>> + GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
>>>> + GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
>>>> + GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
>>>> + GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
>>>> + GATE_SCLK_PERIL, 0, CLK_SET_RATE_PARENT, 0),
>>>> +
>>>> + /* GATE_IP_CAM */
>>>> + GATE(CLK_QEJPEG, "qejpeg", "div_cam_blk_320", GATE_IP_CAM, 19,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PIXELASYNCM1, "pixelasyncm1", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 18, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PIXELASYNCM0, "pixelasyncm0", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 17, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PPMUCAMIF, "ppmucamif", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 16, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_QEM2MSCALER, "qem2mscaler", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 14, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_QEGSCALER1, "qegscaler1", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 13, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_QEGSCALER0, "qegscaler0", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 12, CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_SMMUJPEG, "smmujpeg", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 11, 0, 0),
>>>> + GATE(CLK_SMMUM2M2SCALER, "smmum2m2scaler", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 9, 0, 0),
>>>> + GATE(CLK_SMMUGSCALER1, "smmugscaler1", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 8, 0, 0),
>>>> + GATE(CLK_SMMUGSCALER0, "smmugscaler0", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 7, 0, 0),
>>>> + GATE(CLK_JPEG, "jpeg", "div_cam_blk_320", GATE_IP_CAM, 6, 0, 0),
>>>> + GATE(CLK_M2MSCALER, "m2mscaler", "div_cam_blk_320",
>>>> + GATE_IP_CAM, 2, 0, 0),
>>>> + GATE(CLK_GSCALER1, "gscaler1", "div_cam_blk_320", GATE_IP_CAM, 1, 0, 0),
>>>> + GATE(CLK_GSCALER0, "gscaler0", "div_cam_blk_320", GATE_IP_CAM, 0, 0, 0),
>>>> +
>>>> + /* GATE_IP_MFC */
>>>> + GATE(CLK_QEMFC, "qemfc", "div_aclk_200", GATE_IP_MFC, 5,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PPMUMFC_L, "ppmumfc_l", "div_aclk_200", GATE_IP_MFC, 3,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_SMMUMFC_L, "smmumfc_l", "div_aclk_200", GATE_IP_MFC, 1, 0, 0),
>>>> + GATE(CLK_MFC, "mfc", "div_aclk_200", GATE_IP_MFC, 0, 0, 0),
>>>> +
>>>> + /* GATE_IP_G3D */
>>>> + GATE(CLK_SMMUG3D, "smmug3d", "div_aclk_200", GATE_IP_G3D, 3, 0, 0),
>>>> + GATE(CLK_QEG3D, "qeg3d", "div_aclk_200", GATE_IP_G3D, 2,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PPMUG3D, "ppmug3d", "div_aclk_200", GATE_IP_G3D, 1,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_G3D, "g3d", "div_aclk_200", GATE_IP_G3D, 0, 0, 0),
>>>> +
>>>> + /* GATE_IP_LCD */
>>>> + GATE(CLK_QE_CH1_LCD, "qe_ch1_lcd", "div_aclk_160", GATE_IP_LCD, 7,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_QE_CH0_LCD, "qe_ch0_lcd", "div_aclk_160", GATE_IP_LCD, 6,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_PPMULCD0, "ppmulcd0", "div_aclk_160", GATE_IP_LCD, 5,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_SMMUFIMD0, "smmufimd0", "div_aclk_160", GATE_IP_LCD, 4, 0, 0),
>>>> + GATE(CLK_DSIM0, "dsim0", "div_aclk_160", GATE_IP_LCD, 3, 0, 0),
>>>> + GATE(CLK_SMIES, "smies", "div_aclk_160", GATE_IP_LCD, 2, 0, 0),
>>>> + GATE(CLK_FIMD0, "fimd0", "div_aclk_160", GATE_IP_LCD, 0, 0, 0),
>>>> +
>>>> + /* GATE_IP_ISP */
>>>> + GATE(CLK_CAM1, "cam1", "mout_aclk_266_sub", GATE_IP_ISP, 5, 0, 0),
>>>> + GATE(CLK_UART_ISP_TOP, "uart_isp_top", "mout_aclk_266_sub",
>>>> + GATE_IP_ISP, 3, 0, 0),
>>>> + GATE(CLK_SPI1_ISP_TOP, "spi1_isp_top", "mout_aclk_266_sub",
>>>> + GATE_IP_ISP, 2, 0, 0),
>>>> + GATE(CLK_SPI0_ISP_TOP, "spi0_isp_top", "mout_aclk_266_sub",
>>>> + GATE_IP_ISP, 1, 0, 0),
>>>> +
>>>> + /* GATE_IP_FSYS */
>>>> + GATE(CLK_TSADC, "tsadc", "div_aclk_200", GATE_IP_FSYS, 20, 0, 0),
>>>> + GATE(CLK_PPMUFILE, "ppmufile", "div_aclk_200", GATE_IP_FSYS, 17,
>>>> + CLK_IGNORE_UNUSED, 0),
>>>> + GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
>>>> + GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
>>>> + GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
>>>> + GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
>>>> + GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
>>>> + GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
>>>> + GATE(CLK_PDMA0, "pdma0", "div_aclk_200", GATE_IP_FSYS, 0, 0, 0),
>>>> +
>>>> + /* GATE_IP_PERIL */
>>>> + GATE(CLK_PWM, "pwm", "div_aclk_100", GATE_IP_PERIL, 24, 0, 0),
>>>> + GATE(CLK_PCM, "pcm", "div_aclk_100", GATE_IP_PERIL, 23, 0, 0),
>>>> + GATE(CLK_I2S, "i2s", "div_aclk_100", GATE_IP_PERIL, 21, 0, 0),
>>>> + GATE(CLK_SPI1, "spi1", "div_aclk_100", GATE_IP_PERIL, 17, 0, 0),
>>>> + GATE(CLK_SPI0, "spi0", "div_aclk_100", GATE_IP_PERIL, 16, 0, 0),
>>>> + GATE(CLK_I2C7, "i2c7", "div_aclk_100", GATE_IP_PERIL, 13, 0, 0),
>>>> + GATE(CLK_I2C6, "i2c6", "div_aclk_100", GATE_IP_PERIL, 12, 0, 0),
>>>> + GATE(CLK_I2C5, "i2c5", "div_aclk_100", GATE_IP_PERIL, 11, 0, 0),
>>>> + GATE(CLK_I2C4, "i2c4", "div_aclk_100", GATE_IP_PERIL, 10, 0, 0),
>>>> + GATE(CLK_I2C3, "i2c3", "div_aclk_100", GATE_IP_PERIL, 9, 0, 0),
>>>> + GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
>>>> + GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
>>>> + GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
>>>> + GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
>>>> + GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
>>>> +
>>>> + /* GATE_BLOCK */
>>>> + GATE(CLK_BLOCK_LCD, "block_lcd", "div_aclk_160", GATE_BLOCK, 4, 0, 0),
>>>> + GATE(CLK_BLOCK_G3D, "block_g3d", "div_aclk_200", GATE_BLOCK, 3, 0, 0),
>>>
>>> Are there only 2 gate block clocks? By the way, how are they going to be handled by respective drivers? There is no mainline support for them right now, but you should be aware that adding them will cause common clock framework to disable them if not claimed by any driver.
>>
>> OK, I'll add remaing clock gate of GATE_BLOCK as following.
>> - CLK_BLOCK_MFC MFC_BLK
>> - CLK_BLOCK_CAM CAM_BLK
>>
>
> I agree that in the end the block gates will have to be added. However
> currently drivers do not request block gates and enable them.
> Considering that common clock framework disables all unused clocks by
> default, this will lead to all the gate block clocks being disabled,
> which is not desired.
You're right.
>
> My opinion on this is that block gate clocks should be added in separate
> patch along with patches adding code to get and enable them.
OK, I'll remove the clocks of GATE_BLOCK on next posting(v6)
>
>>>
>>>> +};
>>>> +
>>>> +/* APLL & MPLL & BPLL & UPLL */
>>>> +static struct samsung_pll_rate_table exynos3250_pll_rates[] = {
>>>> + PLL_35XX_RATE(1200000000, 400, 4, 1),
>>>> + PLL_35XX_RATE(1100000000, 275, 3, 1),
>>>> + PLL_35XX_RATE(1066000000, 533, 6, 1),
>>>> + PLL_35XX_RATE(1000000000, 250, 3, 1),
>>>> + PLL_35XX_RATE( 960000000, 320, 4, 1),
>>>> + PLL_35XX_RATE( 900000000, 300, 4, 1),
>>>> + PLL_35XX_RATE( 850000000, 425, 6, 1),
>>>> + PLL_35XX_RATE( 800000000, 200, 3, 1),
>>>> + PLL_35XX_RATE( 700000000, 175, 3, 1),
>>>> + PLL_35XX_RATE( 667000000, 667, 12, 1),
>>>> + PLL_35XX_RATE( 600000000, 400, 4, 2),
>>>> + PLL_35XX_RATE( 533000000, 533, 6, 2),
>>>> + PLL_35XX_RATE( 520000000, 260, 3, 2),
>>>> + PLL_35XX_RATE( 500000000, 250, 3, 2),
>>>> + PLL_35XX_RATE( 400000000, 200, 3, 2),
>>>> + PLL_35XX_RATE( 200000000, 200, 3, 3),
>>>> + PLL_35XX_RATE( 100000000, 200, 3, 4),
>>>> + { /* sentinel */ }
>>>> +};
>>>> +
>>>> +/* VPLL */
>>>> +static struct samsung_pll_rate_table exynos3250_vpll_rates[] = {
>>>> + PLL_36XX_RATE(600000000, 100, 2, 1, 0),
>>>> + PLL_36XX_RATE(533000000, 267, 3, 2, 32668),
>
> The TRM actually lists this as 267, 3, 2, 32768, and according to the
> equation it will be 535000015 Hz. Looks like a typo in the data sheet,
> as 266, 3, 2, 32768 gives 533000015, which is almost exactly 533 MHz.
>
>>>> + PLL_36XX_RATE(519231000, 173, 2, 2, 5046),
>
> 519230991
>
>>>> + PLL_36XX_RATE(500000000, 250, 3, 2, 0),
>>>> + PLL_36XX_RATE(445500000, 149, 2, 2, 32768),
>
> 448500022
>
> Also looks like a typo in the TRM, as 148, 2, 2, 32768 gives 445500022,
> which is almost exactly 445.5 MHz.
>
>
>>>> + PLL_36XX_RATE(445055000, 148, 2, 2, 23047),
>
> 445055024
>
>>>> + PLL_36XX_RATE(400000000, 200, 3, 2, 0),
>>>> + PLL_36XX_RATE(371250000, 124, 2, 2, 49512),
>
> The TRM lists this as 124, 2, 2, 49152 and calculated frequency is
> 374250034. This one also looks like a typo. 123, 2, 2, 49512 would give
> 371250034.
When I calculated fout with following data:
- 124, 2, 2, 49512 would give 374266514.1
- 123, 2, 2, 49512 would give 371266514.1.
I think below value is proper.
- 123, 2, 2, 49512 would give 371266514.1.
>
>>>> + PLL_36XX_RATE(370879000, 185, 3, 2, 28803),
>
> 370879011
>
>>>> + PLL_36XX_RATE(340000000, 170, 3, 2, 0),
>>>> + PLL_36XX_RATE(335000000, 112, 2, 2, 43691),
>
> 338000045
>
> 111, 2, 2, 43691 would give 335000045. A typo in TRM?
>
>>>> + PLL_36XX_RATE(333000000, 111, 2, 2, 0),
>>>> + PLL_36XX_RATE(330000000, 110, 2, 2, 0),
>>>> + PLL_36XX_RATE(320000000, 107, 2, 2, 43691),
>
> 323000045
>
> 106, 2, 2, 43691 would give 320000045.
>
>>>> + PLL_36XX_RATE(300000000, 100, 2, 2, 0),
>>>> + PLL_36XX_RATE(275000000, 275, 3, 3, 0),
>>>> + PLL_36XX_RATE(222750000, 149, 2, 3, 32768),
>
> 224250011
>
> 148, 2, 3, 32768 would give 222750011.
>
>>>> + PLL_36XX_RATE(222528000, 148, 2, 3, 23069),
>
> 222528015
>
>>>> + PLL_36XX_RATE(160000000, 160, 3, 3, 0),
>>>> + PLL_36XX_RATE(148500000, 99, 2, 3, 0),
>>>> + PLL_36XX_RATE(148352000, 99, 2, 3, 59070),
>
> 149852025
>
> 98, 2, 3, 59070 would give 148352025.
>
>>>> + PLL_36XX_RATE(108000000, 144, 2, 4, 0),
>>>> + PLL_36XX_RATE( 74250000, 99, 2, 4, 0),
>>>> + PLL_36XX_RATE( 74176000, 99, 3, 4, 59070),
>
> The TRM seems to list this as 99, 2, 4 and calculated frequency will be
> 74926012, but 98, 2, 4, 59070 would give 74176012.
>
>>>> + PLL_36XX_RATE( 54054000, 216, 3, 5, 14156),
>
> 54054001
>
>>>> + PLL_36XX_RATE( 54000000, 144, 2, 5, 0),
>>>
>>> Are all these frequencies above calculated exactly? For correct operation of rate setting code, it is necessary for frequency values specified in these arrays to be exact, not rounded.
>>
>> When I implemnted exynos3250_vpll_rates array, I used 'VPLL PMS Value' in Exynos3250 TRM without modification.
>> This rate value of exynos3250_vpll_rates is correct.
>
> Well, after checking the values using PLL equation for VPLL, as
> specified in TRM and used by clk-pll.c, the values don't match.
>
> Keep in mind that the values must be exact, _not_ rounded, while in the
> TRM they are rounded. Moreover it looks like several frequencies in TRM
> are off by 1 in M coefficient. Please see above.
Thanks for your point out.
So, I calculated fout of VPLL using PLL equation in Exynos3250 TRM.
Following table show fout(Recalc rate) with fin_pll/mdiv/pdiv/sdiv/kdiv:
fin_pll Recalc rate TRM rate mdiv pdiv sdiv kdiv
24000000 600000000 600000000 100 2 1 0
24000000 533000015.3 533000000 266 3 2 32768
24000000 519230991.1 519231000 173 2 2 5046
24000000 500000000 500000000 250 3 2 0
24000000 445500022.9 445500000 148 2 2 32768
24000000 445055024 445055000 148 2 2 23047
24000000 400000000 400000000 200 3 2 0
24000000 371266514.1 371250000 123 2 2 49512
24000000 370879011.2 370879000 185 3 2 28803
24000000 340000000 340000000 170 3 2 0
24000000 335000045.8 335000000 111 2 2 43691
24000000 333000000 333000000 111 2 2 0
24000000 330000000 330000000 110 2 2 0
24000000 320000045.8 320000000 106 2 2 43691
24000000 300000000 300000000 100 2 2 0
24000000 275000000 275000000 275 3 3 0
24000000 222750011.4 222750000 148 2 3 32768
24000000 222528015.6 222528000 148 2 3 23069
24000000 160000000 160000000 160 3 3 0
24000000 148500000 148500000 99 2 3 0
24000000 148352025.6 148352000 98 2 3 59070
24000000 108000000 108000000 144 2 4 0
24000000 74250000 74250000 99 2 4 0
24000000 74176012.82 74176000 98 2 4 59070
24000000 54054001.68 54054000 216 3 5 14156
24000000 54000000 54000000 144 2 5 0
If you ok, I'll modify vpll_rates table as following:
+static struct samsung_pll_rate_table exynos3250_vpll_rates[] = {
+ PLL_36XX_RATE(600000000, 100, 2, 1, 0),
+ PLL_36XX_RATE(533000000, 266, 3, 2, 32768),
+ PLL_36XX_RATE(519230991, 173, 2, 2, 5046),
+ PLL_36XX_RATE(500000000, 250, 3, 2, 0),
+ PLL_36XX_RATE(445500022, 148, 2, 2, 32768),
+ PLL_36XX_RATE(445055024, 148, 2, 2, 23047),
+ PLL_36XX_RATE(400000000, 200, 3, 2, 0),
+ PLL_36XX_RATE(371266514, 123, 2, 2, 49512),
+ PLL_36XX_RATE(370879011, 185, 3, 2, 28803),
+ PLL_36XX_RATE(340000000, 170, 3, 2, 0),
+ PLL_36XX_RATE(335000045, 111, 2, 2, 43691),
+ PLL_36XX_RATE(333000000, 111, 2, 2, 0),
+ PLL_36XX_RATE(330000000, 110, 2, 2, 0),
+ PLL_36XX_RATE(320000045, 106, 2, 2, 43691),
+ PLL_36XX_RATE(300000000, 100, 2, 2, 0),
+ PLL_36XX_RATE(275000000, 275, 3, 3, 0),
+ PLL_36XX_RATE(222750011, 148, 2, 3, 32768),
+ PLL_36XX_RATE(222528015, 148, 2, 3, 23069),
+ PLL_36XX_RATE(160000000, 160, 3, 3, 0),
+ PLL_36XX_RATE(148500000, 99, 2, 3, 0),
+ PLL_36XX_RATE(148352025, 98, 2, 3, 59070),
+ PLL_36XX_RATE(108000000, 144, 2, 4, 0),
+ PLL_36XX_RATE( 74250000, 99, 2, 4, 0),
+ PLL_36XX_RATE( 74176012, 98, 2, 4, 59070),
+ PLL_36XX_RATE( 54054012, 216, 3, 5, 14156),
+ PLL_36XX_RATE( 54000000, 144, 2, 5, 0),
+ { /* sentinel */ }
+};
Best Regards,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
