This patch changes the fifo reset code to follow the reset procedure
outlined in the documentation of Synopsys Mobile storage host databook
7.2.13.
v2: Add Generic DMA support
per the documentation, move interrupt clear before wait
make the test for DMA host->use_dma rather than host->using_dma
add proper return values (although it appears no caller checks)
Signed-off-by: Sonny Rao <sonnyrao@xxxxxxxxxxxx>
Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
---
drivers/mmc/host/dw_mmc.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++-
drivers/mmc/host/dw_mmc.h | 1 +
2 files changed, 55 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 55cd110..aff57e1 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2325,6 +2325,7 @@ static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
static inline bool dw_mci_fifo_reset(struct dw_mci *host)
{
+ u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
/*
* Reseting generates a block interrupt, hence setting
* the scatter-gather pointer to NULL.
@@ -2334,7 +2335,59 @@ static inline bool dw_mci_fifo_reset(struct dw_mci *host)
host->sg = NULL;
}
- return dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET);
+ /*
+ * The recommended method for resetting is to always reset the
+ * controller and the fifo, but differs slightly depending on the mode.
+ * The Generic DMA mode (non IDMAC) also needs to reset DMA where IDMAC
+ * mode resets IDMAC at the end.
+ *
+ */
+#ifndef CONFIG_MMC_DW_IDMAC
+ if (host->use_dma)
+ flags |= SDMMC_CTRL_DMA_RESET;
+#endif
+ if (dw_mci_ctrl_reset(host, flags)) {
+ /*
+ * In all cases we clear the RAWINTS register to clear any
+ * interrupts.
+ */
+ mci_writel(host, RINTSTS, 0xFFFFFFFF);
+
+ /* if using dma we wait for dma_req to clear */
+ if (host->use_dma) {
+ unsigned long timeout = jiffies + msecs_to_jiffies(500);
+ u32 status;
+ do {
+ status = mci_readl(host, STATUS);
+ if (!(status & SDMMC_STATUS_DMA_REQ))
+ break;
+ cpu_relax();
+ } while (time_before(jiffies, timeout));
+
+ if (status & SDMMC_STATUS_DMA_REQ) {
+ dev_err(host->dev,
+ "%s: Timeout waiting for dma_req to "
+ "clear during reset", __func__);
+ return false;
+ }
+
+ /* when using DMA next we reset the fifo again */
+ dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET);
+ }
+ } else {
+ dev_err(host->dev, "%s: Reset bits didn't clear", __func__);
+ return false;
+ }
+
+#ifdef CONFIG_MMC_DW_IDMAC
+ /* It is also recommended that we reset and reprogram idmac */
+ dw_mci_idmac_reset(host);
+#endif
+
+ /* After a CTRL reset we need to have CIU set clock registers */
+ mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
+
+ return true;
}
static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host)
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 6bf24ab..2505804 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -129,6 +129,7 @@
#define SDMMC_CMD_INDX(n) ((n) & 0x1F)
/* Status register defines */
#define SDMMC_GET_FCNT(x) (((x)>>17) & 0x1FFF)
+#define SDMMC_STATUS_DMA_REQ BIT(31)
/* FIFOTH register defines */
#define SDMMC_SET_FIFOTH(m, r, t) (((m) & 0x7) << 28 | \
((r) & 0xFFF) << 16 | \
--
1.9.1.423.g4596e3a
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
