On 07.05.2014 14:00, Shaik Ameer Basha wrote:
> Hi Tomasz,
>
> On Tue, May 6, 2014 at 11:19 PM, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote:
>> Shaik,
>>
>>
>> On 06.05.2014 18:26, Shaik Ameer Basha wrote:
>>>
>>> This patch adds some missing miscellaneous clocks specific
>>> to exynos5420.
>>>
>>> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
>>> Signed-off-by: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx>
>>> ---
>>> drivers/clk/samsung/clk-exynos5420.c | 14 +++++++++++---
>>> include/dt-bindings/clock/exynos5420.h | 2 ++
>>> 2 files changed, 13 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/clk/samsung/clk-exynos5420.c
>>> b/drivers/clk/samsung/clk-exynos5420.c
>>> index e0e749d..e69e820 100644
>>> --- a/drivers/clk/samsung/clk-exynos5420.c
>>> +++ b/drivers/clk/samsung/clk-exynos5420.c
>>> @@ -273,7 +273,8 @@ PNAME(mout_group5_p) = {"mout_sclk_vpll",
>>> "mout_sclk_dpll"};
>>>
>>> PNAME(mout_fimd1_final_p) = {"mout_fimd1", "mout_fimd1_opt"};
>>> PNAME(mout_sw_aclk66_p) = {"dout_aclk66", "mout_sclk_spll"};
>>> -PNAME(mout_user_aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66" };
>>> +PNAME(mout_user_aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66"};
>>> +PNAME(mout_user_pclk66_gpio_p) = {"mout_sw_aclk66", "ffactor_sw_aclk66"};
>>>
>>> PNAME(mout_sw_aclk200_fsys_p) = {"dout_aclk200_fsys", "mout_sclk_spll"};
>>> PNAME(mout_sw_pclk200_fsys_p) = {"dout_pclk200_fsys", "mout_sclk_spll"};
>>> @@ -372,10 +373,13 @@ static struct samsung_fixed_rate_clock
>>> exynos5420_fixed_rate_clks[] __initdata =
>>> };
>>>
>>> static struct samsung_fixed_factor_clock exynos5420_fixed_factor_clks[]
>>> __initdata = {
>>> - FFACTOR(0, "sclk_hsic_12m", "fin_pll", 1, 2, 0),
>>> + FFACTOR(0, "ffactor_hsic_12m", "fin_pll", 1, 2, 0),
>>> + FFACTOR(0, "ffactor_sw_aclk66", "mout_sw_aclk66", 1, 2, 0),
>>
>>
>> Is the "ffactor_" prefix also present in the datasheet? If not, it should be
>> removed from clock names as well.
>
> Its not there in manual.
> As we are differentiating muxes and dividers with "mout" and "dout"
> this prefix is added
> to differentiate fixed factor clocks.
>
> shall I keep it or not?
mout and div prefixes are also used in documentation, at least in case
of previous Exynos SoCs. In case of Exynos5420 I can see CLKDIV_ prefix
used for dividers, so after stripping the CLK part which is simply
redundant, we are left with div_ prefix as in Exynos4 - not sure why in
Exynos5420 driver dout_ prefix was used, I must have missed that in
review, but I simply didn't have any the documentation for this chip at
that time.
I don't see those hsic_12m and sw_aclk66 clocks in my version of the
datasheet (probably an old version) so I can't say what would be the
proper names for both, but I wouldn't add ffactor_ there.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
