There is no need for abstracting configuration for registers that
are identical on all SoC types.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
drivers/thermal/samsung/exynos_tmu.c | 12 ++++++------
drivers/thermal/samsung/exynos_tmu.h | 11 -----------
drivers/thermal/samsung/exynos_tmu_data.c | 15 ---------------
3 files changed, 6 insertions(+), 32 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 45d7c6f..d37e755 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -215,11 +215,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
if (pdata->test_mux)
con |= (pdata->test_mux << reg->test_mux_addr_shift);
- con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
- con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
+ con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
+ con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
- con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
- con |= (pdata->gain << reg->buf_slope_sel_shift);
+ con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+ con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
if (pdata->noise_cancel_mode) {
con &= ~(reg->therm_trip_mode_mask <<
@@ -228,7 +228,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
}
if (on) {
- con |= (1 << reg->core_en_shift);
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
pdata->trigger_enable[3] << reg->inten_rise3_shift |
pdata->trigger_enable[2] << reg->inten_rise2_shift |
@@ -238,7 +238,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
interrupt_en |=
interrupt_en << reg->inten_fall0_shift;
} else {
- con &= ~(1 << reg->core_en_shift);
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + reg->tmu_inten);
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 4845171..5c25a4b 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -69,15 +69,9 @@ enum soc_type {
* @triminfo_ctrl: trim info controller register.
* @tmu_ctrl: TMU main controller register.
* @test_mux_addr_shift: shift bits of test mux address.
- * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
- * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register.
* @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
* @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register.
* @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register.
- * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl
- register.
- * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register.
- * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register.
* @tmu_status: register drescribing the TMU status.
* @tmu_cur_temp: register containing the current temperature of the TMU.
* @threshold_temp: register containing the base threshold level.
@@ -111,14 +105,9 @@ struct exynos_tmu_registers {
u32 tmu_ctrl;
u32 test_mux_addr_shift;
- u32 buf_vref_sel_shift;
- u32 buf_vref_sel_mask;
u32 therm_trip_mode_shift;
u32 therm_trip_mode_mask;
u32 therm_trip_en_shift;
- u32 buf_slope_sel_shift;
- u32 buf_slope_sel_mask;
- u32 core_en_shift;
u32 tmu_status;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index ef7f186..32530dc 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -28,11 +28,6 @@
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
@@ -92,14 +87,9 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -188,14 +178,9 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
