Adding labels to nodes which do not have it yet
in exynos5420.dtsi. This is done so as to use reference
based node updation in board files.
Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx>
Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5420.dtsi | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index c3a9a66..0d1dea8 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -125,7 +125,7 @@
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
- codec@11000000 {
+ mfc: codec@11000000 {
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
@@ -169,7 +169,7 @@
status = "disabled";
};
- mct@101C0000 {
+ mct: mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-controller;
@@ -270,7 +270,7 @@
interrupts = <0 47 0>;
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -430,22 +430,22 @@
status = "disabled";
};
- serial@12C00000 {
+ uart_0: serial@12C00000 {
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C10000 {
+ uart_1: serial@12C10000 {
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C20000 {
+ uart_2: serial@12C20000 {
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C30000 {
+ uart_3: serial@12C30000 {
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -465,14 +465,14 @@
#phy-cells = <0>;
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
clocks = <&clock CLK_DP1>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
samsung,power-domain = <&disp_pd>;
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
@@ -632,7 +632,7 @@
status = "disabled";
};
- hdmi@14530000 {
+ hdmi: hdmi@14530000 {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
@@ -644,7 +644,7 @@
status = "disabled";
};
- mixer@14450000 {
+ mixer: mixer@14450000 {
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
@@ -715,7 +715,7 @@
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
- watchdog@101D0000 {
+ watchdog: watchdog@101D0000 {
compatible = "samsung,exynos5420-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
@@ -724,7 +724,7 @@
samsung,syscon-phandle = <&pmu_system_controller>;
};
- sss@10830000 {
+ sss: sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x10000>;
interrupts = <0 112 0>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
