Hi Tomasz,
Thanks for the review comments.
On Fri, May 2, 2014 at 2:55 AM, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote:
> On 01.05.2014 23:09, Tomasz Figa wrote:
>>
>> Hi Shaik,
>>
>> On 24.04.2014 15:03, Shaik Ameer Basha wrote:
>>>
>>> This patch adds missing clocks for ISP block
>>>
>>> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
>>> Signed-off-by: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx>
>>> ---
>>> drivers/clk/samsung/clk-exynos5420.c | 80
>>> ++++++++++++++++++++++++++++++++++
>>> 1 file changed, 80 insertions(+)
>>>
>>> diff --git a/drivers/clk/samsung/clk-exynos5420.c
>>> b/drivers/clk/samsung/clk-exynos5420.c
>>> index 389d4b1..972da5d 100755
>>> --- a/drivers/clk/samsung/clk-exynos5420.c
>>> +++ b/drivers/clk/samsung/clk-exynos5420.c
>>> @@ -57,6 +57,7 @@
>>> #define SRC_FSYS 0x10244
>>> #define SRC_PERIC0 0x10250
>>> #define SRC_PERIC1 0x10254
>>> +#define SRC_ISP 0x10270
>>> #define SRC_TOP10 0x10280
>>> #define SRC_TOP11 0x10284
>>> #define SRC_TOP12 0x10288
>>> @@ -77,12 +78,15 @@
>>> #define DIV_PERIC2 0x10560
>>> #define DIV_PERIC3 0x10564
>>> #define DIV_PERIC4 0x10568
>>> +#define SCLK_DIV_ISP0 0x10580
>>> +#define SCLK_DIV_ISP1 0x10584
>>> #define GATE_BUS_TOP 0x10700
>>> #define GATE_BUS_FSYS0 0x10740
>>> #define GATE_BUS_PERIC 0x10750
>>> #define GATE_BUS_PERIC1 0x10754
>>> #define GATE_BUS_PERIS0 0x10760
>>> #define GATE_BUS_PERIS1 0x10764
>>> +#define GATE_TOP_SCLK_ISP 0x10870
>>> #define GATE_IP_GSCL0 0x10910
>>> #define GATE_IP_GSCL1 0x10920
>>> #define GATE_IP_MFC 0x1092c
>>> @@ -145,6 +149,7 @@ static unsigned long exynos5420_clk_regs[]
>>> __initdata = {
>>> SRC_MASK_FSYS,
>>> SRC_MASK_PERIC0,
>>> SRC_MASK_PERIC1,
>>> + SRC_ISP,
>>> DIV_TOP0,
>>> DIV_TOP1,
>>> DIV_TOP2,
>>> @@ -158,12 +163,15 @@ static unsigned long exynos5420_clk_regs[]
>>> __initdata = {
>>> DIV_PERIC2,
>>> DIV_PERIC3,
>>> DIV_PERIC4,
>>> + SCLK_DIV_ISP0,
>>> + SCLK_DIV_ISP1,
>>> GATE_BUS_TOP,
>>> GATE_BUS_FSYS0,
>>> GATE_BUS_PERIC,
>>> GATE_BUS_PERIC1,
>>> GATE_BUS_PERIS0,
>>> GATE_BUS_PERIS1,
>>> + GATE_TOP_SCLK_ISP,
>>> GATE_IP_GSCL0,
>>> GATE_IP_GSCL1,
>>> GATE_IP_MFC,
>>> @@ -250,6 +258,15 @@ PNAME(mout_user_aclk200_fsys_p) = {"fin_pll",
>>> "mout_sw_aclk200_fsys"};
>>>
>>> PNAME(mout_sw_aclk200_fsys2_p) = {"dout_aclk200_fsys2",
>>> "mout_sclk_spll"};
>>> PNAME(mout_user_aclk200_fsys2_p) = {"fin_pll",
>>> "mout_sw_aclk200_fsys2"};
>>> +PNAME(mout_sw_aclk400_isp_p) = {"dout_aclk400_isp", "mout_sclk_spll"};
>>> +PNAME(mout_user_aclk400_isp_p) = {"fin_pll", "mout_sw_aclk400_isp"};
>>> +
>>> +PNAME(mout_sw_aclk333_432_isp0_p) = {"dout_aclk333_432_isp0",
>>> + "mout_sclk_spll"};
>>> +PNAME(mout_user_aclk333_432_isp0_p) = {"fin_pll",
>>> "mout_sw_aclk333_432_isp0"};
>>> +
>>> +PNAME(mout_sw_aclk333_432_isp_p) = {"dout_aclk333_432_isp",
>>> "mout_sclk_spll"};
>>> +PNAME(mout_user_aclk333_432_isp_p) = {"fin_pll",
>>> "mout_sw_aclk333_432_isp"};
>>>
>>> PNAME(mout_sw_aclk200_p) = {"dout_aclk200", "mout_sclk_spll"};
>>> PNAME(mout_aclk200_disp1_p) = {"fin_pll", "mout_sw_aclk200"};
>>> @@ -265,6 +282,7 @@ PNAME(mout_user_aclk166_p) = {"fin_pll",
>>> "mout_sw_aclk166"};
>>>
>>> PNAME(mout_sw_aclk266_p) = {"dout_aclk266", "mout_sclk_spll"};
>>> PNAME(mout_user_aclk266_p) = {"fin_pll", "mout_sw_aclk266"};
>>> +PNAME(mout_user_aclk266_isp_p) = {"fin_pll", "mout_sw_aclk266"};
>>>
>>> PNAME(mout_sw_aclk333_432_gscl_p) = {"dout_aclk333_432_gscl",
>>> "mout_sclk_spll"};
>>> PNAME(mout_user_aclk333_432_gscl_p) = {"fin_pll",
>>> "mout_sw_aclk333_432_gscl"};
>>> @@ -448,6 +466,31 @@ static struct samsung_mux_clock
>>> exynos5420_mux_clks[] __initdata = {
>>> MUX(0, "mout_spi0", mout_group2_p, SRC_PERIC1, 20, 3),
>>> MUX(0, "mout_spi1", mout_group2_p, SRC_PERIC1, 24, 3),
>>> MUX(0, "mout_spi2", mout_group2_p, SRC_PERIC1, 28, 3),
>>> + MUX(0, "mout_aclk400_isp", mout_group1_p, SRC_TOP0, 0, 2),
>>> + MUX(0, "mout_sw_aclk400_isp", mout_sw_aclk400_isp_p,
>>> + SRC_TOP10, 0, 1),
>>> + MUX(0, "mout_user_aclk400_isp", mout_user_aclk400_isp_p,
>>> + SRC_TOP3, 0, 1),
>>> + MUX(0, "mout_aclk333_432_isp0", mout_group4_p, SRC_TOP1, 12, 2),
>>> + MUX(0, "mout_sw_aclk333_432_isp0", mout_sw_aclk333_432_isp0_p,
>>> + SRC_TOP11, 12, 1),
>>> + MUX(0, "mout_user_aclk333_432_isp0", mout_user_aclk333_432_isp0_p,
>>> + SRC_TOP4, 12, 1),
>>> + MUX(0, "mout_aclk333_432_isp", mout_group4_p,
>>> + SRC_TOP1, 4, 2),
>>> + MUX(0, "mout_sw_aclk333_432_isp", mout_sw_aclk333_432_isp_p,
>>> + SRC_TOP11, 4, 1),
>>> + MUX(0, "mout_user_aclk333_432_isp", mout_user_aclk333_432_isp_p,
>>> + SRC_TOP4, 4, 1),
>>> + MUX(0, "mout_user_aclk266_isp", mout_user_aclk266_isp_p,
>>> + SRC_TOP4, 16, 1),
>>> +
>>> + /* ISP Block */
>>> + MUX(0, "mout_pwm_isp", mout_group2_p, SRC_ISP, 24, 3),
>>> + MUX(0, "mout_uart_isp", mout_group2_p, SRC_ISP, 20, 3),
>>> + MUX(0, "mout_spi0_isp", mout_group2_p, SRC_ISP, 12, 3),
>>> + MUX(0, "mout_spi1_isp", mout_group2_p, SRC_ISP, 16, 3),
>>> + MUX(0, "mout_isp_sensor", mout_group2_p, SRC_ISP, 28, 3),
>>> };
>>>
>>> static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
>>> @@ -528,6 +571,22 @@ static struct samsung_div_clock
>>> exynos5420_div_clks[] __initdata = {
>>> DIV(0, "dout_pre_spi0", "dout_spi0", DIV_PERIC4, 8, 8),
>>> DIV(0, "dout_pre_spi1", "dout_spi1", DIV_PERIC4, 16, 8),
>>> DIV(0, "dout_pre_spi2", "dout_spi2", DIV_PERIC4, 24, 8),
>>> +
>>> + /* ISP Block */
>>> + DIV(0, "dout_aclk400_isp", "mout_aclk400_isp", DIV_TOP0, 0, 3),
>>> + DIV(0, "dout_aclk333_432_isp0", "mout_aclk333_432_isp0",
>>> + DIV_TOP1, 16, 3),
>>> + DIV(0, "dout_aclk333_432_isp", "mout_aclk333_432_isp",
>>> + DIV_TOP1, 4, 3),
>>> + DIV(0, "dout_pwm_isp", "mout_pwm_isp", SCLK_DIV_ISP1, 28, 4),
>>> + DIV(0, "dout_uart_isp", "mout_uart_isp", SCLK_DIV_ISP1, 24, 4),
>>> + DIV(0, "dout_spi0_isp", "mout_spi0_isp", SCLK_DIV_ISP1, 16, 4),
>>> + DIV(0, "dout_spi1_isp", "mout_spi1_isp", SCLK_DIV_ISP1, 20, 4),
>>> + DIV(0, "dout_spi0_isp_pre", "dout_spi0_isp", SCLK_DIV_ISP1, 0, 8),
>>> + DIV(0, "dout_spi1_isp_pre", "dout_spi1_isp", SCLK_DIV_ISP1, 8, 8),
>>
>>
>> I think we should have the SET_RATE_PARENT flag set here so that both
>> dividers can be configured together when clk_set_rate() is being called
>> on the _pre clock.
>
>
> Actually the same is also true for all the SCLK gate clocks that have
> dividers as their parents, so that a driver can just take a reference to the
> gate clock and control rate of the clock without references to particular
> dividers.
Ok. Will take care in next series.
Regards,
Shaik Ameer Basha
>
> Best regards,
> Tomasz
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
