Tushar Behera wrote: > > On 03/04/2014 05:52 PM, Sachin Kamat wrote: > > High speed I2C is used on Exynos5 based SoCs. Enable it. > > > > Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx> > > --- > > arch/arm/configs/exynos_defconfig | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/arch/arm/configs/exynos_defconfig > b/arch/arm/configs/exynos_defconfig > > index 4ce7b70ea901..e07a227ec0db 100644 > > --- a/arch/arm/configs/exynos_defconfig > > +++ b/arch/arm/configs/exynos_defconfig > > @@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y > > CONFIG_I2C=y > > CONFIG_I2C_MUX=y > > CONFIG_I2C_ARB_GPIO_CHALLENGE=y > > +CONFIG_I2C_EXYNOS5=y > > CONFIG_I2C_S3C2410=y > > CONFIG_DEBUG_GPIO=y > > # CONFIG_HWMON is not set > > > Kukjin, > > Please consider picking this patch when you plan to update > exynos_defconfig. With this change on upstream kernel, we are able to > get Arndale_Octa board to boot and mount an MMC partition successfully. > Oh, OK. BTW, basically the boot should be fine with/without selecting I2C_EXYNOS5...or if the config is required always for arndale_octa board, it should be enabled without any manual selecting. I think, it means this is just temporal solution not right approach to fix the problem.. I need to look at the codes... Thanks, Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |