Re: [PATCH] ARM: dts: Remove vmmc-supply for mmc@12220000 on arndale-octa board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 25.04.2014 22:30, Javi Merino wrote:
On Fri, Apr 25, 2014 at 09:16:30PM +0100, Tomasz Figa wrote:
Hi Javi,

On 25.04.2014 22:11, Javi Merino wrote:
d726ca2d3316 (ARM: dts: Add vmmc-supply to MMC on arndale-octa board)
added the vmmc-supply to nodes mmc@12200000 and mmc@12220000 of the
DT.  However, this makes the kernel fail to boot on the arndale-octa
spews:

[    5.060000] dwmmc_exynos 12200000.mmc: num-slots property not found, assuming 1 slot is available
[    5.065000] platform 12200000.mmc: Driver dwmmc_exynos requests probe deferral
[    5.075000] dwmmc_exynos 12220000.mmc: num-slots property not found, assuming 1 slot is available
[    5.085000] platform 12220000.mmc: Driver dwmmc_exynos requests probe deferral

And eventually hangs.  Without the vmmc-supply property in the
mmc@12220000 node, the kernel boots again.

Signed-off-by: Javi Merino <javi.merino@xxxxxxx>
---

Hi,

Note that I don't know *why* removing the property works, all I know
is that 3.15-rc2 fails to boot on my Arndale Octa unless I apply this
patch.

Are you sure you have the required PMIC driver enabled in your kernel
config?

I configured the kernel using exynos_defconfig and that gives me:

# CONFIG_PMIC_ADP5520 is not set
# CONFIG_PMIC_DA903X is not set

Should I be using other defconfig for this board?  exynos_defconfig
used to work in 3.14.  Cheers,

Well, unfortunately exynos_defconfig is known to be far from being reasonable. Right now it should be considered just as a base to configure the kernel for Exynos SoCs. Most of board specific options (and many of SoC-wide ones) need to be selected manually.

Anyway, with the number of Exynos boards supported in mainline, I don't think we will be ever going to enable all options for all the supported boards by default in defconfig, especially considering the fact that we will be moving to generic multi_v7_defconfig and likely dropping exynos_defconfig completely.

As for now, I believe you should just make sure yourself that any options relevant to your board are enabled.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux