Do a soft reset software if a timeout happens. This is applicable only for ADC_V2. Change-Id: I939eaa06254e0b246dd636df9470f2eb392c2be1 Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx> --- This change is a part of the patch reviewed at https://lkml.org/lkml/2013/11/5/92 drivers/iio/adc/exynos_adc.c | 50 ++++++++++++++++++++++-------------------- 1 file changed, 26 insertions(+), 24 deletions(-) diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index 4d2467a..805c9f6 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -112,6 +112,30 @@ static inline unsigned int exynos_adc_get_version(struct platform_device *pdev) return (unsigned int)match->data; } +static void exynos_adc_hw_init(struct exynos_adc *info) +{ + u32 con1, con2; + + if (info->version == ADC_V2) { + con1 = ADC_V2_CON1_SOFT_RESET; + writel(con1, ADC_V2_CON1(info->regs)); + + con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | + ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); + writel(con2, ADC_V2_CON2(info->regs)); + + /* Enable interrupts */ + writel(1, ADC_V2_INT_EN(info->regs)); + } else { + /* set default prescaler values and Enable prescaler */ + con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; + + /* Enable 12-bit ADC resolution */ + con1 |= ADC_V1_CON_RES; + writel(con1, ADC_V1_CON(info->regs)); + } +} + static int exynos_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, @@ -149,6 +173,8 @@ static int exynos_read_raw(struct iio_dev *indio_dev, timeout = wait_for_completion_timeout (&info->completion, EXYNOS_ADC_TIMEOUT); if (timeout == 0) { + dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); + exynos_adc_hw_init(info); ret = -ETIMEDOUT; } else { *val = info->value; @@ -230,30 +256,6 @@ static int exynos_adc_remove_devices(struct device *dev, void *c) return 0; } -static void exynos_adc_hw_init(struct exynos_adc *info) -{ - u32 con1, con2; - - if (info->version == ADC_V2) { - con1 = ADC_V2_CON1_SOFT_RESET; - writel(con1, ADC_V2_CON1(info->regs)); - - con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | - ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); - writel(con2, ADC_V2_CON2(info->regs)); - - /* Enable interrupts */ - writel(1, ADC_V2_INT_EN(info->regs)); - } else { - /* set default prescaler values and Enable prescaler */ - con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; - - /* Enable 12-bit ADC resolution */ - con1 |= ADC_V1_CON_RES; - writel(con1, ADC_V1_CON(info->regs)); - } -} - static int exynos_adc_probe(struct platform_device *pdev) { struct exynos_adc *info = NULL; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |