ADC module on Exynos5 SoCs runs at 600KSPS. At this conversion rate, waiting for 1000 msecs is wasteful (incase of h/w failure). Hence, reduce the time out to 100msecs and use wait_for_completion_timeout() instead of wait_for_completion_interruptible_timeout() Also, handle the return values in exynos_raw_read() call. Change-Id: Icb8cade162094b2777c9f3c77120635deef5947c Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx> --- This change is a part of the patch reviewd at https://lkml.org/lkml/2013/11/5/92 drivers/iio/adc/exynos_adc.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index a2b8b1a..4d2467a 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -82,7 +82,7 @@ enum adc_version { #define ADC_CON_EN_START (1u << 0) #define ADC_DATX_MASK 0xFFF -#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000)) +#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100)) struct exynos_adc { void __iomem *regs; @@ -121,6 +121,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev, struct exynos_adc *info = iio_priv(indio_dev); unsigned long timeout; u32 con1, con2; + int ret; if (mask != IIO_CHAN_INFO_RAW) return -EINVAL; @@ -145,16 +146,19 @@ static int exynos_read_raw(struct iio_dev *indio_dev, ADC_V1_CON(info->regs)); } - timeout = wait_for_completion_interruptible_timeout + timeout = wait_for_completion_timeout (&info->completion, EXYNOS_ADC_TIMEOUT); - *val = info->value; + if (timeout == 0) { + ret = -ETIMEDOUT; + } else { + *val = info->value; + *val2 = 0; + ret = IIO_VAL_INT; + } mutex_unlock(&indio_dev->mlock); - if (timeout == 0) - return -ETIMEDOUT; - - return IIO_VAL_INT; + return ret; } static irqreturn_t exynos_adc_isr(int irq, void *dev_id) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |