Hello, > -----Original Message----- > From: Vivek Gautam [mailto:gautamvivek1987@xxxxxxxxx] On Behalf Of > Vivek Gautam > Sent: Monday, April 21, 2014 9:17 PM > To: linux-usb@xxxxxxxxxxxxxxx; linux-samsung-soc@xxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; linux- > arm-kernel@xxxxxxxxxxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; > stern@xxxxxxxxxxxxxxxxxxx; balbi@xxxxxx; kgene.kim@xxxxxxxxxxx; Vivek > Gautam; Anton Tikhomirov > Subject: [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd > regulators > > Facilitate getting required 3.3V and 1.0V VDD supply for > DWC3 controller on Exynos. > > With patches for regulators' nodes merged in 3.15: > c8c253f ARM: dts: Add regulator entries to smdk5420 > 275dcd2 ARM: dts: add max77686 pmic node for smdk5250, > > certain perripherals will now need to ensure that, > they request VDD regulators in their drivers, and enable > them so as to make them working. > > Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> > Cc: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx> > --- > > Based on 'usb-next' branch of Greg's USB tree. > Also cleanly applies on 'next' branch of Balbi's USB tree. > > drivers/usb/dwc3/dwc3-exynos.c | 51 > ++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 49 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3- > exynos.c > index 28c8ad7..c9d9102 100644 > --- a/drivers/usb/dwc3/dwc3-exynos.c > +++ b/drivers/usb/dwc3/dwc3-exynos.c > @@ -27,6 +27,7 @@ > #include <linux/usb/usb_phy_gen_xceiv.h> > #include <linux/of.h> > #include <linux/of_platform.h> > +#include <linux/regulator/consumer.h> > > struct dwc3_exynos { > struct platform_device *usb2_phy; > @@ -34,6 +35,8 @@ struct dwc3_exynos { > struct device *dev; > > struct clk *clk; > + struct regulator *vdd33; > + struct regulator *vdd10; > }; > > static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos) > @@ -144,20 +147,46 @@ static int dwc3_exynos_probe(struct > platform_device *pdev) > > clk_prepare_enable(exynos->clk); > > + exynos->vdd33 = devm_regulator_get(dev, "vdd33"); > + if (IS_ERR(exynos->vdd33)) { > + ret = PTR_ERR(exynos->vdd33); > + goto err2; Is regulator property mandatory for dwc3-exynos? If it is not and device tree doesn't provide it, dwc3-exynos driver probe shouldn't fail here. > + } > + ret = regulator_enable(exynos->vdd33); > + if (ret) { > + dev_err(dev, "Failed to enable VDD33 supply\n"); > + goto err2; > + } > + Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |