RE: [PATCH v8 2/3] ARM: dts: add dts files for exynos5260 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rahul Sharma wrote:
> 
> The patch adds the dts files for exynos5260.
> 
> Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
> Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx>
> Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>

Looks good to me. I will queue this 5260 SoC dtsi and 3rd xyref5260 board dt
for 3.6 and I hope I can send this series with other multi-platform for
exynos in this time ;-)

Thanks,
Kukjin

> ---
>  arch/arm/boot/dts/exynos5260-pinctrl.dtsi |  574
> +++++++++++++++++++++++++++++
>  arch/arm/boot/dts/exynos5260.dtsi         |  304 +++++++++++++++
>  2 files changed, 878 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi
>  create mode 100644 arch/arm/boot/dts/exynos5260.dtsi
> 
> diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
> b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
> new file mode 100644
> index 0000000..f6ee55e
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
> @@ -0,0 +1,574 @@
> +/*
> + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as
> device
> + * tree nodes are listed in this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#define PIN_PULL_NONE	0
> +#define PIN_PULL_DOWN	1
> +#define PIN_PULL_UP	3
> +
> +&pinctrl_0 {
> +	gpa0: gpa0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpa1: gpa1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpa2: gpa2 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb0: gpb0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb1: gpb1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb2: gpb2 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb3: gpb3 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb4: gpb4 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb5: gpb5 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpd0: gpd0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpd1: gpd1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpd2: gpd2 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpe0: gpe0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpe1: gpe1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpf0: gpf0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpf1: gpf1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpk0: gpk0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpx0: gpx0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpx1: gpx1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpx2: gpx2 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpx3: gpx3 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	uart0_data: uart0-data {
> +		samsung,pins = "gpa0-0", "gpa0-1";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	uart0_fctl: uart0-fctl {
> +		samsung,pins = "gpa0-2", "gpa0-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	uart1_data: uart1-data {
> +		samsung,pins = "gpa1-0", "gpa1-1";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	uart1_fctl: uart1-fctl {
> +		samsung,pins = "gpa1-2", "gpa1-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	uart2_data: uart2-data {
> +		samsung,pins = "gpa1-4", "gpa1-5";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	spi0_bus: spi0-bus {
> +		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	spi1_bus: spi1-bus {
> +		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	usb3_vbus0_en: usb3-vbus0-en {
> +		samsung,pins = "gpa2-4";
> +		samsung,pin-function = <1>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2s1_bus: i2s1-bus {
> +		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
> +				"gpb0-4";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	pcm1_bus: pcm1-bus {
> +		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
> +				"gpb0-4";
> +		samsung,pin-function = <3>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	spdif1_bus: spdif1-bus {
> +		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
> +		samsung,pin-function = <4>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	spi2_bus: spi2-bus {
> +		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c0_hs_bus: i2c0-hs-bus {
> +		samsung,pins = "gpb3-0", "gpb3-1";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c1_hs_bus: i2c1-hs-bus {
> +		samsung,pins = "gpb3-2", "gpb3-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c2_hs_bus: i2c2-hs-bus {
> +		samsung,pins = "gpb3-4", "gpb3-5";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c3_hs_bus: i2c3-hs-bus {
> +		samsung,pins = "gpb3-6", "gpb3-7";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c4_bus: i2c4-bus {
> +		samsung,pins = "gpb4-0", "gpb4-1";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c5_bus: i2c5-bus {
> +		samsung,pins = "gpb4-2", "gpb4-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c6_bus: i2c6-bus {
> +		samsung,pins = "gpb4-4", "gpb4-5";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c7_bus: i2c7-bus {
> +		samsung,pins = "gpb4-6", "gpb4-7";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c8_bus: i2c8-bus {
> +		samsung,pins = "gpb5-0", "gpb5-1";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c9_bus: i2c9-bus {
> +		samsung,pins = "gpb5-2", "gpb5-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c10_bus: i2c10-bus {
> +		samsung,pins = "gpb5-4", "gpb5-5";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	i2c11_bus: i2c11-bus {
> +		samsung,pins = "gpb5-6", "gpb5-7";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	cam_gpio_a: cam-gpio-a {
> +		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
> +			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
> +			"gpe1-0", "gpe1-1";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	cam_gpio_b: cam-gpio-b {
> +		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
> +			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
> +		samsung,pin-function = <3>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	cam_i2c1_bus: cam-i2c1-bus {
> +		samsung,pins = "gpf0-2", "gpf0-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	cam_i2c0_bus: cam-i2c0-bus {
> +		samsung,pins = "gpf0-0", "gpf0-1";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	cam_spi0_bus: cam-spi0-bus {
> +		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	cam_spi1_bus: cam-spi1-bus {
> +		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <0>;
> +	};
> +};
> +
> +&pinctrl_1 {
> +	gpc0: gpc0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpc1: gpc1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpc2: gpc2 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpc3: gpc3 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpc4: gpc4 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	sd0_clk: sd0-clk {
> +		samsung,pins = "gpc0-0";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd0_cmd: sd0-cmd {
> +		samsung,pins = "gpc0-1";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd0_bus1: sd0-bus-width1 {
> +		samsung,pins = "gpc0-2";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd0_bus4: sd0-bus-width4 {
> +		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd0_bus8: sd0-bus-width8 {
> +		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd0_rdqs: sd0-rdqs {
> +		samsung,pins = "gpc0-6";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd1_clk: sd1-clk {
> +		samsung,pins = "gpc1-0";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd1_cmd: sd1-cmd {
> +		samsung,pins = "gpc1-1";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd1_bus1: sd1-bus-width1 {
> +		samsung,pins = "gpc1-2";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd1_bus4: sd1-bus-width4 {
> +		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd1_bus8: sd1-bus-width8 {
> +		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd2_clk: sd2-clk {
> +		samsung,pins = "gpc2-0";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd2_cmd: sd2-cmd {
> +		samsung,pins = "gpc2-1";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_NONE>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd2_cd: sd2-cd {
> +		samsung,pins = "gpc2-2";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd2_bus1: sd2-bus-width1 {
> +		samsung,pins = "gpc2-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <3>;
> +	};
> +
> +	sd2_bus4: sd2-bus-width4 {
> +		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <PIN_PULL_UP>;
> +		samsung,pin-drv = <3>;
> +	};
> +};
> +
> +&pinctrl_2 {
> +	gpz0: gpz0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpz1: gpz1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +};
> diff --git a/arch/arm/boot/dts/exynos5260.dtsi
> b/arch/arm/boot/dts/exynos5260.dtsi
> new file mode 100644
> index 0000000..5398a60
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5260.dtsi
> @@ -0,0 +1,304 @@
> +/*
> + * SAMSUNG EXYNOS5260 SoC device tree source
> + *
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include "skeleton.dtsi"
> +
> +#include <dt-bindings/clock/exynos5260-clk.h>
> +
> +/ {
> +	compatible = "samsung,exynos5260", "samsung,exynos5";
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		pinctrl0 = &pinctrl_0;
> +		pinctrl1 = &pinctrl_1;
> +		pinctrl2 = &pinctrl_2;
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a15";
> +			reg = <0x0>;
> +			cci-control-port = <&cci_control1>;
> +		};
> +
> +		cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a15";
> +			reg = <0x1>;
> +			cci-control-port = <&cci_control1>;
> +		};
> +
> +		cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x100>;
> +			cci-control-port = <&cci_control0>;
> +		};
> +
> +		cpu@101 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x101>;
> +			cci-control-port = <&cci_control0>;
> +		};
> +
> +		cpu@102 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x102>;
> +			cci-control-port = <&cci_control0>;
> +		};
> +
> +		cpu@103 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x103>;
> +			cci-control-port = <&cci_control0>;
> +		};
> +	};
> +
> +	soc: soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		clock_top: clock-controller@10010000 {
> +			compatible = "samsung,exynos5260-clock-top";
> +			reg = <0x10010000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_peri: clock-controller@10200000 {
> +			compatible = "samsung,exynos5260-clock-peri";
> +			reg = <0x10200000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_egl: clock-controller@10600000 {
> +			compatible = "samsung,exynos5260-clock-egl";
> +			reg = <0x10600000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_kfc: clock-controller@10700000 {
> +			compatible = "samsung,exynos5260-clock-kfc";
> +			reg = <0x10700000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_g2d: clock-controller@10A00000 {
> +			compatible = "samsung,exynos5260-clock-g2d";
> +			reg = <0x10A00000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_mif: clock-controller@10CE0000 {
> +			compatible = "samsung,exynos5260-clock-mif";
> +			reg = <0x10CE0000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_mfc: clock-controller@11090000 {
> +			compatible = "samsung,exynos5260-clock-mfc";
> +			reg = <0x11090000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_g3d: clock-controller@11830000 {
> +			compatible = "samsung,exynos5260-clock-g3d";
> +			reg = <0x11830000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_fsys: clock-controller@122E0000 {
> +			compatible = "samsung,exynos5260-clock-fsys";
> +			reg = <0x122E0000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_aud: clock-controller@128C0000 {
> +			compatible = "samsung,exynos5260-clock-aud";
> +			reg = <0x128C0000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_isp: clock-controller@133C0000 {
> +			compatible = "samsung,exynos5260-clock-isp";
> +			reg = <0x133C0000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_gscl: clock-controller@13F00000 {
> +			compatible = "samsung,exynos5260-clock-gscl";
> +			reg = <0x13F00000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_disp: clock-controller@14550000 {
> +			compatible = "samsung,exynos5260-clock-disp";
> +			reg = <0x14550000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		gic: interrupt-controller@10481000 {
> +			compatible = "arm,cortex-a15-gic",
"arm,cortex-a9-gic";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x10481000 0x1000>,
> +				<0x10482000 0x1000>,
> +				<0x10484000 0x2000>,
> +				<0x10486000 0x2000>;
> +			interrupts = <1 9 0xf04>;
> +		};
> +
> +		chipid: chipid@10000000 {
> +			compatible = "samsung,exynos4210-chipid";
> +			reg = <0x10000000 0x100>;
> +		};
> +
> +		mct: mct@100B0000 {
> +			compatible = "samsung,exynos4210-mct";
> +			reg = <0x100B0000 0x1000>;
> +			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
> +			clock-names = "fin_pll", "mct";
> +			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
> +					<0 107 0>, <0 122 0>, <0 123 0>,
> +					<0 124 0>, <0 125 0>, <0 126 0>,
> +					<0 127 0>, <0 128 0>, <0 129 0>;
> +		};
> +
> +		cci: cci@10F00000 {
> +			compatible = "arm,cci-400";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			reg = <0x10F00000 0x1000>;
> +			ranges = <0x0 0x10F00000 0x6000>;
> +
> +			cci_control0: slave-if@4000 {
> +				compatible = "arm,cci-400-ctrl-if";
> +				interface-type = "ace";
> +				reg = <0x4000 0x1000>;
> +			};
> +
> +			cci_control1: slave-if@5000 {
> +				compatible = "arm,cci-400-ctrl-if";
> +				interface-type = "ace";
> +				reg = <0x5000 0x1000>;
> +			};
> +		};
> +
> +		pinctrl_0: pinctrl@11600000 {
> +			compatible = "samsung,exynos5260-pinctrl";
> +			reg = <0x11600000 0x1000>;
> +			interrupts = <0 79 0>;
> +
> +			wakeup-interrupt-controller {
> +				compatible =
"samsung,exynos4210-wakeup-eint";
> +				interrupt-parent = <&gic>;
> +				interrupts = <0 32 0>;
> +			};
> +		};
> +
> +		pinctrl_1: pinctrl@12290000 {
> +			compatible = "samsung,exynos5260-pinctrl";
> +			reg = <0x12290000 0x1000>;
> +			interrupts = <0 157 0>;
> +		};
> +
> +		pinctrl_2: pinctrl@128B0000 {
> +			compatible = "samsung,exynos5260-pinctrl";
> +			reg = <0x128B0000 0x1000>;
> +			interrupts = <0 243 0>;
> +		};
> +
> +		uart0: serial@12C00000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x12C00000 0x100>;
> +			interrupts = <0 146 0>;
> +			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri
> PERI_SCLK_UART0>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@12C10000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x12C10000 0x100>;
> +			interrupts = <0 147 0>;
> +			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri
> PERI_SCLK_UART1>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@12C20000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x12C20000 0x100>;
> +			interrupts = <0 148 0>;
> +			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri
> PERI_SCLK_UART2>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		uart3: serial@12860000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x12860000 0x100>;
> +			interrupts = <0 145 0>;
> +			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud
> AUD_SCLK_AUD_UART>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		mmc_0: mmc@12140000 {
> +			compatible = "samsung,exynos5250-dw-mshc";
> +			reg = <0x12140000 0x2000>;
> +			interrupts = <0 156 0>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top
> TOP_SCLK_MMC0>;
> +			clock-names = "biu", "ciu";
> +			fifo-depth = <64>;
> +			status = "disabled";
> +		};
> +
> +		mmc_1: mmc@12150000 {
> +			compatible = "samsung,exynos5250-dw-mshc";
> +			reg = <0x12150000 0x2000>;
> +			interrupts = <0 158 0>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top
> TOP_SCLK_MMC1>;
> +			clock-names = "biu", "ciu";
> +			fifo-depth = <64>;
> +			status = "disabled";
> +		};
> +
> +		mmc_2: mmc@12160000 {
> +			compatible = "samsung,exynos5250-dw-mshc";
> +			reg = <0x12160000 0x2000>;
> +			interrupts = <0 159 0>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top
> TOP_SCLK_MMC2>;
> +			clock-names = "biu", "ciu";
> +			fifo-depth = <64>;
> +			status = "disabled";
> +		};
> +	};
> +};
> +
> +#include "exynos5260-pinctrl.dtsi"
> --
> 1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux