On Tuesday, April 22, 2014 7:39 AM, Ajay Kumar wrote: > > This patch adds a simple driver to handle all the LCD and LED > powerup/down routines needed to support eDP/eDP-LVDS panels > supported on exynos boards. > > The LCD and LED units are usually powered up via regulators, > and almost on all boards, we will have a BL_EN pin to enable/ > disable the backlight. Sometimes, we can have LCD_EN switches > as well. The routines in this driver can be used to control > panel power sequence on such boards. > > Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx> > --- > Changes since V1: > Added routine for post_disable, removed few unwanted headers. > Refactored a lot of code. > > .../devicetree/bindings/panel/exynos-dp-panel.txt | 45 ++++ > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-exynos-dp.c | 251 ++++++++++++++++++++ > 4 files changed, 306 insertions(+) > create mode 100644 Documentation/devicetree/bindings/panel/exynos-dp-panel.txt > create mode 100644 drivers/gpu/drm/panel/panel-exynos-dp.c > > diff --git a/Documentation/devicetree/bindings/panel/exynos-dp-panel.txt > b/Documentation/devicetree/bindings/panel/exynos-dp-panel.txt > new file mode 100644 > index 0000000..3fbca54 > --- /dev/null > +++ b/Documentation/devicetree/bindings/panel/exynos-dp-panel.txt > @@ -0,0 +1,45 @@ > +exynos_DP_panel/DP_to_LVDS_panel Please fix it as below. +Exynos DP panel/DP to LVDS panel [....] > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 4ec874d..ea9d5ac 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -30,4 +30,13 @@ config DRM_PANEL_S6E8AA0 > select DRM_MIPI_DSI > select VIDEOMODE_HELPERS > > +config DRM_PANEL_EXYNOS_DP > + tristate "support for DP panels" It looks very general. Please fix it as below. + tristate "support for Exynos DP panels" Best regards, Jingoo Han > + depends on OF && DRM_PANEL && DRM_EXYNOS_DP > + help > + DRM panel driver for DP panels and LVDS connected via DP bridges > + that need at most a regulator for LCD unit, a regulator for LED unit > + and/or enable GPIOs for LCD or LED units. Delay values can also be > + specified to support powerup and powerdown process. > + [.....] -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |