The two functions to write out to the console (one used in normal console mode and one in polling console mode) were slightly different. One used a barrier() in its loop and the other a cpu_relax(). The barrier() really doesn't do anything since we're using rd_regl() to read the port anyway. Switch it to cpu_relax() to make things consistent. No known bugs / issues are fixed by this change--it just makes things more consistent. Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> --- drivers/tty/serial/samsung.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 12442748..1f5505e 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1466,7 +1466,7 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch) unsigned int ufcon = rd_regl(port, S3C2410_UFCON); while (!s3c24xx_serial_console_txrdy(port, ufcon)) - barrier(); + cpu_relax(); wr_regb(port, S3C2410_UTXH, ch); } -- 1.9.1.423.g4596e3a -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |