Hi Tomasz, On Tue, Apr 15, 2014 at 10:20 PM, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote: > Hi Shaik, > > > On 27.03.2014 12:07, Shaik Ameer Basha wrote: >> >> From: Rahul Sharma <rahul.sharma@xxxxxxxxxxx> >> >> Add more clock IDs to be used in DT bindings for Exynos5420. >> >> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx> >> Signed-off-by: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx> >> --- >> include/dt-bindings/clock/exynos5420.h | 62 >> ++++++++++++++++++++++++++++++-- >> 1 file changed, 60 insertions(+), 2 deletions(-) >> >> diff --git a/include/dt-bindings/clock/exynos5420.h >> b/include/dt-bindings/clock/exynos5420.h >> index 5eefd88..e921913 100644 >> --- a/include/dt-bindings/clock/exynos5420.h >> +++ b/include/dt-bindings/clock/exynos5420.h >> @@ -58,6 +58,16 @@ >> #define CLK_SCLK_GSCL_WA 156 >> #define CLK_SCLK_GSCL_WB 157 >> #define CLK_SCLK_HDMIPHY 158 >> +#define CLK_SCLK_MPHY_REFCLK 159 >> +#define CLK_SCLK_SPI0_ISP 160 >> +#define CLK_SCLK_SPI1_ISP 161 >> +#define CLK_SCLK_UART_ISP 162 >> +#define CLK_SCLK_ISP_SENSOR0 163 >> +#define CLK_SCLK_ISP_SENSOR1 164 >> +#define CLK_SCLK_ISP_SENSOR2 165 >> +#define CLK_SCLK_PWM_ISP 166 >> +#define CLK_SCLK_HSIC_12M 167 >> +#define CLK_SCLK_MPHY_IXTAL24 168 >> >> /* gate clocks */ >> #define CLK_ACLK66_PERIC 256 >> @@ -123,6 +133,7 @@ >> #define CLK_USBH20 365 >> #define CLK_USBD300 366 >> #define CLK_USBD301 367 >> +#define CLK_PCLK200_FSYS 370 >> #define CLK_ACLK400_MSCL 380 >> #define CLK_MSCL0 381 >> #define CLK_MSCL1 382 >> @@ -141,6 +152,8 @@ >> #define CLK_ACLK300_DISP1 420 >> #define CLK_FIMD1 421 >> #define CLK_SMMU_FIMD1 422 >> +#define CLK_SMMU_FIMD1M1 423 >> +#define CLK_ACLK400_DISP1 424 >> #define CLK_ACLK166 430 >> #define CLK_MIXER 431 >> #define CLK_ACLK266 440 >> @@ -172,12 +185,57 @@ >> #define CLK_SMMU_FIMCL1 493 >> #define CLK_SMMU_FIMCL3 494 >> #define CLK_FIMC_LITE3 495 >> -#define CLK_ACLK_G3D 500 >> -#define CLK_G3D 501 >> +#define CLK_G3D 500 > > > What is the reason for this ID change? Even if CLK_ACLK_G3D is removed, as > it wasn't even referenced by the driver, original clock IDs should remain > fixed. My Bad. Anyways, I am planning to post one more patch at the end of the series to remove the gaps b/w the numbers. I hope there is no significance of the numbers once we move completely to macros. > > >> #define CLK_SMMU_MIXER 502 >> +#define CLK_PCLK_TZPC10 503 >> +#define CLK_PCLK_TZPC11 504 >> +#define CLK_PCLK_MC 505 >> +#define CLK_PCLK_TOP_RTC 506 >> +#define CLK_SMMU_JPEG2 507 >> +#define CLK_PCLK_ROTATOR 508 >> +#define CLK_SMMU_RTIC 509 >> +#define CLK_PCLK_G2D 510 >> +#define CLK_ACLK_SMMU_G2D 511 >> +#define CLK_SMMU_G2D 512 >> +#define CLK_ACLK_SMMU_MDMA0 513 >> +#define CLK_SMMU_MDMA0 514 >> +#define CLK_ACLK_SMMU_SSS 515 >> +#define CLK_SMMU_SSS 516 >> +#define CLK_SMMU_SLIM_SSS 517 >> +#define CLK_ACLK_SMMU_SLIM_SSS 518 >> +#define CLK_ACLK266_ISP 519 >> +#define CLK_ACLK400_ISP 520 >> +#define CLK_ACLK333_432_ISP0 521 >> +#define CLK_ACLK333_432_ISP 522 >> +#define CLK_ACLK_SMMU_MIXER 523 >> +#define CLK_PCLK_HDMIPHY 524 >> +#define CLK_PCLK_GSCL0 525 >> +#define CLK_PCLK_GSCL1 526 >> +#define CLK_PCLK_FIMC_3AA 527 >> +#define CLK_ACLK_FIMC_LITE0 528 >> +#define CLK_ACLK_FIMC_LITE1 529 >> +#define CLK_PCLK_FIMC_LITE0 530 >> +#define CLK_PCLK_FIMC_LITE1 531 >> +#define CLK_PCLK_FIMC_LITE3 532 >> +#define CLK_PCLK_MSCL0 533 >> +#define CLK_PCLK_MSCL1 534 >> +#define CLK_PCLK_MSCL2 535 >> +#define CLK_PCLK_MFC 536 >> >> /* mux clocks */ >> #define CLK_MOUT_HDMI 640 >> +#define CLK_MOUT_FIMD1 641 >> +#define CLK_MOUT_MAUDIO0 642 >> +#define CLK_MOUT_SPI0 643 >> +#define CLK_MOUT_SPI1 644 >> +#define CLK_MOUT_SPI2 645 >> +#define CLK_MOUT_SW_ACLK333 646 >> +#define CLK_MOUT_USER_ACLK333 647 >> +#define CLK_MOUT_SW_ACLK300_GSCL 648 >> +#define CLK_MOUT_USER_ACLK300_GSCL 649 >> +#define CLK_MOUT_SW_ACLK333_432_GSCL 650 >> +#define CLK_MOUT_USER_ACLK333_432_GSCL 651 >> +#define CLK_MOUT_G3D 652 >> >> /* divider clocks */ >> #define CLK_DOUT_PIXEL 768 >> > > Also similar comment as for patch 1/7, it's hard to tell why this change is > needed at all. Ok. Will take care for the next series. Regards, Shaik Ameer Basha > > Best regards, > Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |