In case of using CPU interface panel, the relevant registers should be set. So this patch adds relevant dt bindings. Signed-off-by: YoungJun Cho <yj44.cho@xxxxxxxxxxx> Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> --- .../devicetree/bindings/video/samsung-fimd.txt | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt index 2dad41b..924c2e1 100644 --- a/Documentation/devicetree/bindings/video/samsung-fimd.txt +++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt @@ -44,6 +44,15 @@ Optional Properties: - display-timings: timing settings for FIMD, as described in document [1]. Can be used in case timings cannot be provided otherwise or to override timings provided by the panel. +- samsung,sysreg-phandle: handle to syscon used to control the system registers +- vidout-i80-ldi: boolean to support i80 interface instead of rgb one +- cs-setup: clock cycles for the active period of address signal enable until + chip select is enable in i80 interface +- wr-setup: clock cycles for the active period of CS signal enable until + write signal is enable in i80 interface +- wr-act: clock cycles for the active period of CS enable in i80 interface +- wr-hold: clock cycles for the active period of CS disable until write signal + is disable in i80 interface The device node can contain 'port' child nodes according to the bindings defined in [2]. The following are properties specific to those nodes: -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |