The cpufreq core supports the cpufreq_for_each_entry macro helper
for iteration over the cpufreq_frequency_table, so use it.
It should have no functional changes.
Signed-off-by: Stratos Karafotis <stratosk@xxxxxxxxxxxx>
---
drivers/cpufreq/exynos5440-cpufreq.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c
index a6b8214..3e3dd0c 100644
--- a/drivers/cpufreq/exynos5440-cpufreq.c
+++ b/drivers/cpufreq/exynos5440-cpufreq.c
@@ -114,25 +114,23 @@ static struct cpufreq_freqs freqs;
static int init_div_table(void)
{
- struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table;
+ struct cpufreq_frequency_table *pos, *freq_tbl = dvfs_info->freq_table;
unsigned int tmp, clk_div, ema_div, freq, volt_id;
- int i = 0;
struct dev_pm_opp *opp;
rcu_read_lock();
- for (i = 0; freq_tbl[i].frequency != CPUFREQ_TABLE_END; i++) {
-
+ cpufreq_for_each_entry(pos, freq_tbl) {
opp = dev_pm_opp_find_freq_exact(dvfs_info->dev,
- freq_tbl[i].frequency * 1000, true);
+ pos->frequency * 1000, true);
if (IS_ERR(opp)) {
rcu_read_unlock();
dev_err(dvfs_info->dev,
"failed to find valid OPP for %u KHZ\n",
- freq_tbl[i].frequency);
+ pos->frequency);
return PTR_ERR(opp);
}
- freq = freq_tbl[i].frequency / 1000; /* In MHZ */
+ freq = pos->frequency / 1000; /* In MHZ */
clk_div = ((freq / CPU_DIV_FREQ_MAX) & P0_7_CPUCLKDEV_MASK)
<< P0_7_CPUCLKDEV_SHIFT;
clk_div |= ((freq / CPU_ATB_FREQ_MAX) & P0_7_ATBCLKDEV_MASK)
@@ -157,7 +155,8 @@ static int init_div_table(void)
tmp = (clk_div | ema_div | (volt_id << P0_7_VDD_SHIFT)
| ((freq / FREQ_UNIT) << P0_7_FREQ_SHIFT));
- __raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 * i);
+ __raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 *
+ (pos - freq_tbl));
}
rcu_read_unlock();
@@ -166,8 +165,9 @@ static int init_div_table(void)
static void exynos_enable_dvfs(unsigned int cur_frequency)
{
- unsigned int tmp, i, cpu;
+ unsigned int tmp, cpu;
struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
+ struct cpufreq_frequency_table *pos;
/* Disable DVFS */
__raw_writel(0, dvfs_info->base + XMU_DVFS_CTRL);
@@ -182,15 +182,15 @@ static void exynos_enable_dvfs(unsigned int cur_frequency)
__raw_writel(tmp, dvfs_info->base + XMU_PMUIRQEN);
/* Set initial performance index */
- for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
- if (freq_table[i].frequency == cur_frequency)
+ cpufreq_for_each_entry(pos, freq_table) {
+ if (pos->frequency == cur_frequency)
break;
+ }
- if (freq_table[i].frequency == CPUFREQ_TABLE_END) {
+ if (pos->frequency == CPUFREQ_TABLE_END) {
dev_crit(dvfs_info->dev, "Boot up frequency not supported\n");
/* Assign the highest frequency */
- i = 0;
- cur_frequency = freq_table[i].frequency;
+ cur_frequency = freq_table->frequency;
}
dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ",
@@ -199,7 +199,7 @@ static void exynos_enable_dvfs(unsigned int cur_frequency)
for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) {
tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
- tmp |= (i << C0_3_PSTATE_NEW_SHIFT);
+ tmp |= ((pos - freq_table) << C0_3_PSTATE_NEW_SHIFT);
__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
}
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
