Hi Tomasz,
On 10 April 2014 21:02, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> Hi Rahul,
>
> On 02.04.2014 19:13, Rahul Sharma wrote:
>>
>> From: Rahul Sharma <Rahul.Sharma@xxxxxxxxxxx>
>>
>> Exynos drm hdmi driver used to get dummy hdmiphy clock to
>> control the PMU bit for hdmiphy. This clock is removed
>> during CCF migration. This should also be cleaned from
>> hdmi driver.
>>
>> Signed-off-by: Rahul Sharma <Rahul.Sharma@xxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/exynos/exynos_hdmi.c | 8 --------
>> 1 file changed, 8 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c
>> b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> index 25bf65a..23abfa0 100644
>> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
>> @@ -74,7 +74,6 @@ struct hdmi_resources {
>> struct clk *sclk_hdmi;
>> struct clk *sclk_pixel;
>> struct clk *sclk_hdmiphy;
>> - struct clk *hdmiphy;
>> struct clk *mout_hdmi;
>> struct regulator_bulk_data *regul_bulk;
>> int regul_count;
>> @@ -1854,7 +1853,6 @@ static void hdmi_poweron(struct exynos_drm_display
>> *display)
>> if (regulator_bulk_enable(res->regul_count, res->regul_bulk))
>> DRM_DEBUG_KMS("failed to enable regulator bulk\n");
>>
>> - clk_prepare_enable(res->hdmiphy);
>> clk_prepare_enable(res->hdmi);
>> clk_prepare_enable(res->sclk_hdmi);
>>
>> @@ -1881,7 +1879,6 @@ static void hdmi_poweroff(struct exynos_drm_display
>> *display)
>>
>> clk_disable_unprepare(res->sclk_hdmi);
>> clk_disable_unprepare(res->hdmi);
>> - clk_disable_unprepare(res->hdmiphy);
>> regulator_bulk_disable(res->regul_count, res->regul_bulk);
>>
>> pm_runtime_put_sync(hdata->dev);
>> @@ -1977,11 +1974,6 @@ static int hdmi_resources_init(struct hdmi_context
>> *hdata)
>> DRM_ERROR("failed to get clock 'sclk_hdmiphy'\n");
>> goto fail;
>> }
>> - res->hdmiphy = devm_clk_get(dev, "hdmiphy");
>> - if (IS_ERR(res->hdmiphy)) {
>> - DRM_ERROR("failed to get clock 'hdmiphy'\n");
>> - goto fail;
>> - }
>> res->mout_hdmi = devm_clk_get(dev, "mout_hdmi");
>> if (IS_ERR(res->mout_hdmi)) {
>> DRM_ERROR("failed to get clock 'mout_hdmi'\n");
>>
>
> This patch makes the series non-bisectable. If you remove handling of this
> dummy clock until you add proper support for PHY isolation setting, then at
> this point you end up with non-working code.
>
> You should first provide new infrastructure in parallel to existing one,
> then move all users to new one and only then drop the old one.
>
Actually, this is dead code since CCF migration. After this patch we will get
probe success but no UI. I will take care about bisection in my series.
Currently planning to discard first 2 patches and rebase on Tomasz
Stanislawski's
1 bit phy patches.
Regards,
Rahul Sharma
> Best regards,
> Tomasz
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
