One more step is moving the clock ratio setting at idle time in pm.c
The macro names have been changed to be consistent with the other macros
name in the file.
Note, the clock divider was working only when cpuidle was enabled because it
was in its init routine. With this change, the clock divider is set in the pm's
init routine, so it will also operate when the cpuidle driver is not set, which
is good.
Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Reviewed-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
---
arch/arm/mach-exynos/cpuidle.c | 54 ---------------------------------------
arch/arm/mach-exynos/pm.c | 35 +++++++++++++++++++++++++
arch/arm/mach-exynos/regs-pmu.h | 19 ++++++++++++++
3 files changed, 54 insertions(+), 54 deletions(-)
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index ce31004..97a441f 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -39,25 +39,6 @@
#define S5P_CHECK_AFTR 0xFCBA0D10
-#define EXYNOS5_PWR_CTRL1 (S5P_VA_CMU + 0x01020)
-#define EXYNOS5_PWR_CTRL2 (S5P_VA_CMU + 0x01024)
-
-#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28)
-#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16)
-#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9)
-#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8)
-#define PWR_CTRL1_USE_CORE1_WFE (1 << 5)
-#define PWR_CTRL1_USE_CORE0_WFE (1 << 4)
-#define PWR_CTRL1_USE_CORE1_WFI (1 << 1)
-#define PWR_CTRL1_USE_CORE0_WFI (1 << 0)
-
-#define PWR_CTRL2_DIV2_UP_EN (1 << 25)
-#define PWR_CTRL2_DIV1_UP_EN (1 << 24)
-#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16)
-#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8)
-#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4)
-#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0)
-
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
static void exynos_set_wakeupmask(void)
{
@@ -127,38 +108,6 @@ static int exynos_enter_lowpower(struct cpuidle_device *dev,
return exynos_enter_core0_aftr(dev, drv, new_index);
}
-static void __init exynos5_core_down_clk(void)
-{
- unsigned int tmp;
-
- /*
- * Enable arm clock down (in idle) and set arm divider
- * ratios in WFI/WFE state.
- */
- tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \
- PWR_CTRL1_CORE1_DOWN_RATIO | \
- PWR_CTRL1_DIV2_DOWN_EN | \
- PWR_CTRL1_DIV1_DOWN_EN | \
- PWR_CTRL1_USE_CORE1_WFE | \
- PWR_CTRL1_USE_CORE0_WFE | \
- PWR_CTRL1_USE_CORE1_WFI | \
- PWR_CTRL1_USE_CORE0_WFI;
- __raw_writel(tmp, EXYNOS5_PWR_CTRL1);
-
- /*
- * Enable arm clock up (on exiting idle). Set arm divider
- * ratios when not in idle along with the standby duration
- * ratios.
- */
- tmp = PWR_CTRL2_DIV2_UP_EN | \
- PWR_CTRL2_DIV1_UP_EN | \
- PWR_CTRL2_DUR_STANDBY2_VAL | \
- PWR_CTRL2_DUR_STANDBY1_VAL | \
- PWR_CTRL2_CORE2_UP_RATIO | \
- PWR_CTRL2_CORE1_UP_RATIO;
- __raw_writel(tmp, EXYNOS5_PWR_CTRL2);
-}
-
static struct cpuidle_driver exynos_idle_driver = {
.name = "exynos_idle",
.owner = THIS_MODULE,
@@ -181,9 +130,6 @@ static int exynos_cpuidle_probe(struct platform_device *pdev)
{
int ret;
- if (soc_is_exynos5250())
- exynos5_core_down_clk();
-
if (soc_is_exynos5440())
exynos_idle_driver.state_count = 1;
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 9773a00..c4138bf 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -140,6 +140,38 @@ static void exynos_cpu_restore_register(void)
: "cc");
}
+static void __init exynos5_core_down_clk(void)
+{
+ unsigned int tmp;
+
+ /*
+ * Enable arm clock down (in idle) and set arm divider
+ * ratios in WFI/WFE state.
+ */
+ tmp = EXYNOS5_PWR_CTRL1_CORE2_DOWN_RATIO | \
+ EXYNOS5_PWR_CTRL1_CORE1_DOWN_RATIO | \
+ EXYNOS5_PWR_CTRL1_DIV2_DOWN_EN | \
+ EXYNOS5_PWR_CTRL1_DIV1_DOWN_EN | \
+ EXYNOS5_PWR_CTRL1_USE_CORE1_WFE | \
+ EXYNOS5_PWR_CTRL1_USE_CORE0_WFE | \
+ EXYNOS5_PWR_CTRL1_USE_CORE1_WFI | \
+ EXYNOS5_PWR_CTRL1_USE_CORE0_WFI;
+ __raw_writel(tmp, EXYNOS5_PWR_CTRL1);
+
+ /*
+ * Enable arm clock up (on exiting idle). Set arm divider
+ * ratios when not in idle along with the standby duration
+ * ratios.
+ */
+ tmp = EXYNOS5_PWR_CTRL2_DIV2_UP_EN | \
+ EXYNOS5_PWR_CTRL2_DIV1_UP_EN | \
+ EXYNOS5_PWR_CTRL2_DUR_STANDBY2_VAL | \
+ EXYNOS5_PWR_CTRL2_DUR_STANDBY1_VAL | \
+ EXYNOS5_PWR_CTRL2_CORE2_UP_RATIO | \
+ EXYNOS5_PWR_CTRL2_CORE1_UP_RATIO;
+ __raw_writel(tmp, EXYNOS5_PWR_CTRL2);
+}
+
static int exynos_cpu_suspend(unsigned long arg)
{
#ifdef CONFIG_CACHE_L2X0
@@ -244,6 +276,9 @@ static void exynos_pm_resume(void)
s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
+ if (soc_is_exynos5250())
+ exynos5_core_down_clk();
+
if (!soc_is_exynos5250())
scu_enable(S5P_VA_SCU);
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 4f6a256..35c4eb3 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -313,4 +313,23 @@
#define EXYNOS5_OPTION_USE_RETENTION (1 << 4)
+#define EXYNOS5_PWR_CTRL1 (S5P_VA_CMU + 0x01020)
+#define EXYNOS5_PWR_CTRL2 (S5P_VA_CMU + 0x01024)
+
+#define EXYNOS5_PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28)
+#define EXYNOS5_PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16)
+#define EXYNOS5_PWR_CTRL1_DIV2_DOWN_EN (1 << 9)
+#define EXYNOS5_PWR_CTRL1_DIV1_DOWN_EN (1 << 8)
+#define EXYNOS5_PWR_CTRL1_USE_CORE1_WFE (1 << 5)
+#define EXYNOS5_PWR_CTRL1_USE_CORE0_WFE (1 << 4)
+#define EXYNOS5_PWR_CTRL1_USE_CORE1_WFI (1 << 1)
+#define EXYNOS5_PWR_CTRL1_USE_CORE0_WFI (1 << 0)
+
+#define EXYNOS5_PWR_CTRL2_DIV2_UP_EN (1 << 25)
+#define EXYNOS5_PWR_CTRL2_DIV1_UP_EN (1 << 24)
+#define EXYNOS5_PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16)
+#define EXYNOS5_PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8)
+#define EXYNOS5_PWR_CTRL2_CORE2_UP_RATIO (1 << 4)
+#define EXYNOS5_PWR_CTRL2_CORE1_UP_RATIO (1 << 0)
+
#endif /* __ASM_ARCH_REGS_PMU_H */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
