On Thu, Apr 10 2014 at 10:28:23 am BST, Chanwoo Choi <cw00.choi@xxxxxxxxxxx> wrote:
> This patch decide proper lowpower mode of either a15 or a9 according to own ID
> from Main ID register.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> arch/arm/mach-exynos/hotplug.c | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
> index 5eead53..36d3db6 100644
> --- a/arch/arm/mach-exynos/hotplug.c
> +++ b/arch/arm/mach-exynos/hotplug.c
> @@ -135,13 +135,20 @@ void __ref exynos_cpu_die(unsigned int cpu)
> int primary_part = 0;
>
> /*
> - * we're ready for shutdown now, so do it.
> - * Exynos4 is A9 based while Exynos5 is A15; check the CPU part
> + * we're ready for shutdown now, so do it. Exynos4 is A9 based
> + * while Exynos5 is A15/Exynos7 is A7; check the CPU part
> * number by reading the Main ID register and then perform the
> * appropriate sequence for entering low power.
> */
> asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc");
While you're touching that code, how about using:
primary_part = read_cpuid(CPUID_ID);
> - if ((primary_part & 0xfff0) == 0xc0f0)
> +
> + /*
> + * Main ID register of Cortex series
> + * - Cortex-a7 : 0x410F_C07x
> + * - Cortex-a15 : 0x410F_C0Fx
> + */
> + primary_part = primary_part & 0xfff0;
> + if (primary_part == 0xc0f0 || primary_part == 0xc070)
ARM_CPU_PART_CORTEX_A15, ARM_CPU_PART_CORTEX_A7
> cpu_enter_lowpower_a15();
> else
> cpu_enter_lowpower_a9();
Thanks,
M.
--
Jazz is not dead. It just smells funny.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
