During registration of regulators if external control for regulator was set in DTS the ena_gpio and ena_gpio_flags fields of regulator_config were set to proper values. However the same regulator_config was used in next iterations of loop so the ena_gpio fields carried over to next regulators. The issue was not observed as ena_gpio is supported only for Buck9 regulator which is often the last regulator parsed from DTS. Be sure to clear ena_gpio config fields before registering the regulator. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> --- drivers/regulator/s5m8767.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index f05badabd69e..92f19a005dc3 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -964,6 +964,7 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) config.driver_data = s5m8767; config.regmap = iodev->regmap_pmic; config.of_node = pdata->regulators[i].reg_node; + config.ena_gpio = config.ena_gpio_flags = 0; if (pdata->regulators[i].ext_control_gpio) s5m8767_regulator_config_ext_control(s5m8767, &pdata->regulators[i], &config); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |