Re: [RFC 3/4] drm: exynos: add IELCD post processor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Thanks for the patch.

On 03/19/2014 03:22 PM, Ajay Kumar wrote:
> Add post processor ops for IELCD and their support functions.
> Expose an interface for the FIMD to register IELCD PP.
> 
> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
> Signed-off-by: Shirish S <s.shirish@xxxxxxxxxxx>
> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
> ---
>  drivers/gpu/drm/exynos/Makefile       |   3 +-
>  drivers/gpu/drm/exynos/exynos_ielcd.c | 295 ++++++++++++++++++++++++++++++++++
>  include/video/samsung_fimd.h          |  43 +++++
>  3 files changed, 340 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/gpu/drm/exynos/exynos_ielcd.c
> 
> diff --git a/drivers/gpu/drm/exynos/Makefile b/drivers/gpu/drm/exynos/Makefile
> index 653eab5..f3d7314 100644
> --- a/drivers/gpu/drm/exynos/Makefile
> +++ b/drivers/gpu/drm/exynos/Makefile
> @@ -10,7 +10,8 @@ exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o \
>  
>  exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
>  exynosdrm-$(CONFIG_DRM_EXYNOS_DMABUF) += exynos_drm_dmabuf.o
> -exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD)	+= exynos_drm_fimd.o exynos_mdnie.o
> +exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD)	+= exynos_drm_fimd.o exynos_mdnie.o \
> +						exynos_ielcd.o

Kconfig option would be nice.

>  exynosdrm-$(CONFIG_DRM_EXYNOS_DSI)	+= exynos_drm_dsi.o
>  exynosdrm-$(CONFIG_DRM_EXYNOS_DP)	+= exynos_dp_core.o exynos_dp_reg.o
>  exynosdrm-$(CONFIG_DRM_EXYNOS_HDMI)	+= exynos_hdmi.o exynos_mixer.o
> diff --git a/drivers/gpu/drm/exynos/exynos_ielcd.c b/drivers/gpu/drm/exynos/exynos_ielcd.c
> new file mode 100644
> index 0000000..33d0d34
> --- /dev/null
> +++ b/drivers/gpu/drm/exynos/exynos_ielcd.c
> @@ -0,0 +1,295 @@
> +/* drivers/gpu/drm/exynos/exynos_ielcd.c
> + *
> + * Samsung IELCD driver
> + *
> + * Copyright (C) 2014 Samsung Electronics Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> +*/
> +
> +#include <linux/errno.h>
> +#include <linux/of_device.h>
> +#include <linux/delay.h>
> +
> +#include <video/samsung_fimd.h>
> +
> +#include <drm/drmP.h>
> +
> +#include "exynos_drm_drv.h"
> +#include "exynos_fimd_pp.h"
> +
> +#define exynos_ielcd_readl(addr)	readl(ielcd->exynos_ielcd_base + addr)
> +#define exynos_ielcd_writel(addr, val) \
> +				writel(val, ielcd->exynos_ielcd_base + addr)
> +#define IELCD_TIMEOUT_CNT	1000
> +
> +struct ielcd_context {
> +	void __iomem			*exynos_ielcd_base;
> +	unsigned		vdisplay;
> +	unsigned		vsync_len;
> +	unsigned		vbpd;
> +	unsigned		vfpd;
> +	unsigned		hdisplay;
> +	unsigned		hsync_len;
> +	unsigned		hbpd;
> +	unsigned		hfpd;
> +	unsigned		vidcon0;
> +	unsigned		vidcon1;
> +};
> +
> +static int ielcd_logic_start(struct ielcd_context *ielcd)
> +{
> +	exynos_ielcd_writel(IELCD_AUXCON, IELCD_MAGIC_KEY);
> +
> +	return 0;
> +}
> +
> +static void ielcd_set_polarity(struct ielcd_context *ielcd)
> +{
> +	unsigned int cfg;
> +
> +	cfg = exynos_ielcd_readl(IELCD_VIDCON1);
> +
> +	cfg &= ~(VIDCON1_INV_VCLK | VIDCON1_INV_HSYNC
> +				| VIDCON1_INV_VSYNC | VIDCON1_INV_VDEN);
> +	cfg |= ielcd->vidcon1;
> +	exynos_ielcd_writel(IELCD_VIDCON1, cfg);

Isn't it suppose to be configurable, read from drm_mode + DT properties.
BTW how it works with the same settings in FIMD? FIMD settings are
ignored or xor-ed ?

> +}
> +
> +static void ielcd_set_timing(struct ielcd_context *ielcd)
> +{
> +	unsigned int cfg;
> +
> +	/*LCD verical porch setting*/
> +	cfg = VIDTCON0_VBPD(ielcd->vbpd - 1) |
> +		VIDTCON0_VFPD(ielcd->vfpd - 1) |
> +		VIDTCON0_VSPW(ielcd->vsync_len - 1);
> +
> +	exynos_ielcd_writel(IELCD_VIDTCON0, cfg);
> +	/*LCD horizontal porch setting*/
> +	cfg = VIDTCON1_HBPD(ielcd->hbpd - 1) |
> +		VIDTCON1_HFPD(ielcd->hfpd - 1) |
> +		VIDTCON1_HSPW(ielcd->hsync_len - 1);
> +
> +	exynos_ielcd_writel(IELCD_VIDTCON1, cfg);
> +}
> +
> +static void ielcd_set_lcd_size(struct ielcd_context *ielcd)
> +{
> +	unsigned int cfg;
> +
> +	cfg = (IELCD_VIDTCON2_LINEVAL(ielcd->vdisplay - 1) |
> +				IELCD_VIDTCON2_HOZVAL(ielcd->hdisplay - 1));
> +	exynos_ielcd_writel(IELCD_VIDTCON2, cfg);
> +
> +	/* window0 position setting */
> +	exynos_ielcd_writel(IELCD_VIDOSD0A, 0);
> +	cfg = (IELCD_VIDOSDB_XPOS_END(ielcd->hdisplay - 1)) |
> +			(IELCD_VIDOSDB_YPOS_END(ielcd->vdisplay - 1));
> +	exynos_ielcd_writel(IELCD_VIDOSD0B, cfg);
> +
> +	/* window0 osd size setting */
> +	exynos_ielcd_writel(IELCD_VIDOSD0C, ielcd->hdisplay *
> +							ielcd->vdisplay);
> +
> +	/* window0 page size(bytes) */
> +	exynos_ielcd_writel(IELCD_VIDW00ADD2, ielcd->hdisplay * 4);
> +}
> +
> +static int exynos_ielcd_hw_trigger_check(struct ielcd_context *ielcd)
> +{
> +	unsigned int cfg;
> +	unsigned int count = 0;
> +
> +	cfg = exynos_ielcd_readl(IELCD_TRIGCON);
> +	cfg &= ~(SWTRGCMD_W0BUF | TRGMODE_W0BUF);
> +	cfg |= (SWTRGCMD_W0BUF | TRGMODE_W0BUF);

One of two lines above should be removed.

> +	exynos_ielcd_writel(IELCD_TRIGCON, cfg);
> +
> +	do {
> +		cfg = exynos_ielcd_readl(IELCD_SHADOWCON);
> +		cfg |= IELCD_W0_SW_SHADOW_UPTRIG;
> +		exynos_ielcd_writel(IELCD_SHADOWCON, cfg);
> +
> +		cfg = exynos_ielcd_readl(IELCD_VIDCON0);
> +		cfg |= IELCD_SW_SHADOW_UPTRIG;
> +		exynos_ielcd_writel(IELCD_VIDCON0, cfg);
> +
> +		count++;
> +		if (count > IELCD_TIMEOUT_CNT) {
> +			DRM_ERROR("ielcd start fail\n");
> +			return -EBUSY;
> +		}
> +		udelay(10);
> +	} while (exynos_ielcd_readl(IELCD_WINCON0) & IELCD_TRGSTATUS);
> +
> +	return 0;
> +}
> +
> +static int exynos_ielcd_display_on(struct ielcd_context *ielcd)
> +{
> +	unsigned int cfg;
> +
> +	cfg = exynos_ielcd_readl(IELCD_VIDCON0);
> +	cfg |= (VIDCON0_ENVID | VIDCON0_ENVID_F);
> +	exynos_ielcd_writel(IELCD_VIDCON0, cfg);
> +
> +	return exynos_ielcd_hw_trigger_check(ielcd);
> +}
> +
> +int exynos_ielcd_display_off(void *pp_ctx)
> +{
> +	struct ielcd_context *ielcd = pp_ctx;
> +	unsigned int cfg, ielcd_count = 0;
> +	int ret = 0;
> +
> +	cfg = exynos_ielcd_readl(IELCD_VIDCON0);
> +	cfg &= ~(VIDCON0_ENVID | VIDCON0_ENVID_F);
> +
> +	exynos_ielcd_writel(IELCD_VIDCON0, cfg);
> +
> +	do {
> +		if (++ielcd_count > IELCD_TIMEOUT_CNT) {
> +			DRM_ERROR("ielcd off TIMEDOUT\n");
> +			ret = -ETIMEDOUT;
> +			break;
> +		}
> +
> +		if (!(exynos_ielcd_readl(IELCD_VIDCON1) &
> +						VIDCON1_LINECNT_MASK)) {
> +			ret = 0;
> +			break;
> +		}
> +		udelay(200);
> +	} while (1);
> +
> +	return ret;
> +}
> +
> +static void exynos_ielcd_config_rgb(struct ielcd_context *ielcd)
> +{
> +	unsigned int cfg;
> +
> +	cfg = exynos_ielcd_readl(IELCD_VIDCON0);
> +	cfg &= ~(VIDCON0_VIDOUT_MASK | VIDCON0_VCLK_MASK);
> +	cfg |= VIDCON0_VIDOUT_RGB;
> +	cfg |= VIDCON0_VCLK_NORMAL;
> +
> +	exynos_ielcd_writel(IELCD_VIDCON0, cfg);
> +}


I guess it should depend on device connected to the output.

> +
> +int exynos_ielcd_power_on(void *pp_ctx)
> +{
> +	struct ielcd_context *ielcd = pp_ctx;
> +	unsigned int cfg;
> +	int ret = 0;
> +
> +	ielcd_logic_start(ielcd);
> +	ielcd_set_polarity(ielcd);
> +
> +	ielcd_set_lcd_size(ielcd);
> +	ielcd_set_timing(ielcd);
> +
> +	/* window0 setting , fixed */
> +	cfg = WINCONx_ENLOCAL | WINCON0_BPPMODE_24BPP_888 | WINCONx_ENWIN;
> +	exynos_ielcd_writel(IELCD_WINCON0, cfg);

Ditto

> +
> +	exynos_ielcd_config_rgb(ielcd);
> +
> +	ret = exynos_ielcd_display_on(ielcd);
> +	if (ret) {
> +		DRM_ERROR("IELCD failed to start\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static void exynos_ielcd_mode_set(void *pp_ctx,
> +				const struct drm_display_mode *in_mode)
> +{
> +	struct ielcd_context *ielcd = pp_ctx;
> +
> +	ielcd->vdisplay = in_mode->crtc_vdisplay;
> +	ielcd->vsync_len = in_mode->crtc_vsync_end - in_mode->crtc_vsync_start;
> +	ielcd->vbpd = in_mode->crtc_vtotal - in_mode->crtc_vsync_end;
> +	ielcd->vfpd = in_mode->crtc_vsync_start - in_mode->crtc_vdisplay;
> +
> +	ielcd->hdisplay = in_mode->crtc_hdisplay;
> +	ielcd->hsync_len = in_mode->crtc_hsync_end - in_mode->crtc_hsync_start;
> +	ielcd->hbpd = in_mode->crtc_htotal - in_mode->crtc_hsync_end;
> +	ielcd->hfpd = in_mode->crtc_hsync_start - in_mode->crtc_hdisplay;
> +}
> +
> +static struct exynos_fimd_pp_ops ielcd_ops = {
> +	.power_on =	exynos_ielcd_power_on,
> +	.power_off =	exynos_ielcd_display_off,
> +	.mode_set =	exynos_ielcd_mode_set,
> +};
> +
> +static struct exynos_fimd_pp ielcd_pp = {
> +	.ops =		&ielcd_ops,
> +};
> +
> +int exynos_ielcd_init(struct device *dev, struct exynos_fimd_pp **pp)
> +{
> +	struct device_node *ielcd_np;
> +	struct ielcd_context *ielcd;
> +	u32 addr[2];
> +	int ret = 0;
> +
> +	ielcd = kzalloc(sizeof(struct ielcd_context), GFP_KERNEL);
> +	if (!ielcd) {
> +		DRM_ERROR("failed to allocate ielcd\n");
> +		ret = -ENOMEM;
> +		goto error0;
> +	}
> +
> +	ielcd_np = of_parse_phandle(dev->of_node, "samsung,ielcd", 0);
> +	if (!ielcd_np) {
> +		DRM_ERROR("No ielcd node present, "
> +					"MDNIE feature will be disabled\n");
> +		ret = -ENODEV;
> +		goto error1;
> +	}
> +
> +	if (of_property_read_u32_array(ielcd_np, "reg", addr, 2)) {
> +		DRM_ERROR("failed to get base address for IELCD\n");
> +		ret = -ENOMEM;
> +		goto error1;
> +	}
> +
> +	ielcd->exynos_ielcd_base = ioremap(addr[0], addr[1]);
> +	if (!ielcd->exynos_ielcd_base) {
> +		DRM_ERROR("failed to ioremap ielcd device\n");
> +		ret = -ENOMEM;
> +		goto error1;
> +	}
> +
> +	if (of_get_property(dev->of_node, "samsung,fimd-vidout-rgb", NULL))
> +		ielcd->vidcon0 |= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB;
> +	if (of_get_property(dev->of_node, "samsung,fimd-inv-hsync", NULL))
> +		ielcd->vidcon1 |= VIDCON1_INV_HSYNC;
> +	if (of_get_property(dev->of_node, "samsung,fimd-inv-vsync", NULL))
> +		ielcd->vidcon1 |= VIDCON1_INV_VSYNC;
> +	if (of_get_property(dev->of_node, "samsung,fimd-inv-vclk", NULL))
> +		ielcd->vidcon1 |= VIDCON1_INV_VCLK;
> +	if (of_get_property(dev->of_node, "samsung,fimd-inv-vden", NULL))
> +		ielcd->vidcon1 |= VIDCON1_INV_VDEN;

vidcon0, vidcon1 are not used.

> +
> +	ielcd_pp.ctx = ielcd;
> +
> +	*pp = &ielcd_pp;
> +
> +	DRM_INFO("IELCD initialzation done\n");
> +
> +	return 0;
> +error1:
> +	kfree(ielcd);
> +error0:
> +	return ret;

of_node_put on ielcd_np missing.
iounmap missing.

No remove routine at all, this is also true for mDNIe.

> +}

Again, platform_device fits better here, IMHO.


> +EXPORT_SYMBOL(exynos_ielcd_init);
> diff --git a/include/video/samsung_fimd.h b/include/video/samsung_fimd.h
> index 3ff7cad..cc64757 100644
> --- a/include/video/samsung_fimd.h
> +++ b/include/video/samsung_fimd.h
> @@ -60,7 +60,9 @@
>  #define VIDCON0_CLKVAL_F_SHIFT			6
>  #define VIDCON0_CLKVAL_F_LIMIT			0xff
>  #define VIDCON0_CLKVAL_F(_x)			((_x) << 6)
> +#define VIDCON0_VCLK_MASK			(1 << 5)
>  #define VIDCON0_VCLKFREE			(1 << 5)
> +#define VIDCON0_VCLK_NORMAL			(0 << 5)
>  #define VIDCON0_CLKDIR				(1 << 4)
>  
>  #define VIDCON0_CLKSEL_MASK			(0x3 << 2)
> @@ -466,3 +468,44 @@
>  #define FIMD_V8_VIDTCON2	0x20018
>  #define FIMD_V8_VIDTCON3	0x2001C
>  #define FIMD_V8_VIDCON1		0x20004
> +
> +/* IELCD Register Offsets */
> +#define IELCD_VIDCON0			(0x0000)
> +#define IELCD_VIDCON1			(0x0004)
> +
> +#define IELCD_VIDTCON0			(0x0010)
> +#define IELCD_VIDTCON1			(0x0014)
> +#define IELCD_VIDTCON2			(0x0018)
> +
> +#define IELCD_WINCON0			(0x0020)
> +#define IELCD_TRGSTATUS			(1 << 25)
> +
> +#define IELCD_SHADOWCON			(0x0034)
> +
> +#define IELCD_VIDOSD0A			(0x0040)
> +#define IELCD_VIDOSD0B			(0x0044)
> +#define IELCD_VIDOSD0C			(0x0048)
> +#define IELCD_VIDW00ADD2		(0x0100)
> +
> +#define IELCD_TRIGCON			(0x01A4)
> +#define IELCD_AUXCON			(0x0278)
> +
> +/* Value */
> +#define IELCD_MAGIC_KEY			(0x2ff47)
> +
> +/* Register bit */
> +#define IELCD_VIDTCON2_LINEVAL(_x)	((_x) << 12)
> +#define IELCD_VIDTCON2_HOZVAL(_x)	((_x) << 0)
> +
> +/* IELCD_VIDCON0 */
> +#define IELCD_SW_SHADOW_UPTRIG		(1 << 14)
> +
> +/* IELCD_SHADOWCON */
> +#define IELCD_W0_SW_SHADOW_UPTRIG	(1 << 16)
> +
> +/* IELCD_IELCD_VIDOSD */
> +#define IELCD_VIDOSDB_XPOS_END(_x)	((_x) << 11)
> +#define IELCD_VIDOSDB_YPOS_END(_x)	((_x) << 0)
> +
> +#define SWTRGCMD_W0BUF		(1 << 6)
> +#define TRGMODE_W0BUF		(1 << 5)
> 

On which Exynos SoCs it was tested? What about compatibility with other
SoCs?


Regards
Andrzej



--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux