Thanks Tomasz, Please let me know if any concern. Meanwhile I will post dt patches with "clock" and "clock-names" properties added for each controller node. Regards, Rahul Sharma. On 24 March 2014 03:50, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote: > Hi Rahul, > > > On 23.03.2014 21:45, Rahul Sharma wrote: >> >> From: Rahul Sharma <Rahul.Sharma@xxxxxxxxxxx> >> >> Add clock support for exynos5260 SoC. >> >> This series is based on Tomasz Figa's samsung-next branch. >> >> V6: >> 1) Listed external Clocks in documentation file. >> 2) Listed Input Clocks for each clock controller in >> exynos5260-clock.txt. >> 3) Added Clock and Clock-names properties. >> 4) Assigned IDs to all clocks in the clock file. >> 5) Moved all PHY clocks as fixed rate to the driver file. >> 6) Reorder clocks to maintain acscending order on the basis of clock >> register offset and bit numer. >> >> V5: >> 1) Include S3c2412 and S3c2443 in clock provider patch. >> 2) Added SCLK_TOP_FIMD with CLK_IGNORE_UNUSED due to Suspend >> failure. >> 3) Moved exynos5260-clk.h to include/dt-bindings/clock. >> 4) Fix exynos5260_clk_sleep_init protoype for PM disabled.W >> 5) Moved fixed clock registeration to DT. >> 6) Removed CLK_IGNORE_UNUSED flags from UART clocks. Earlier >> facing issues because of RFS probing all TTYs. >> >> V4: >> 1) Rework clock file as per Tomasz review comments at >> http://www.spinics.net/lists/arm-kernel/msg310116.html. >> >> V3: >> 1) Removed "samsung,exynos5260-clock" property from clock files. >> 2) Replaced "__SPIN_LOCK_UNLOCKED(lock)" with spin_lock_init. >> 3) Removed '(' and ')' around numeric constants in macros. >> >> V2: >> 1) Move suspend resume handling to Exynos5410 Clock file. >> 2) Removed Unused Macros and Condition checks for Exynos5260. >> 3) Add spin lock to clock provider context. >> 4) Add clock provider context for Exynos5410. >> 5) Uniform implementation for callbacks for PLL2550xx. >> 6) Split Exynos5260 clock file patch to bring it under 100 Kb limit. >> 7) Replace aclk/pclk/hclk gates with combined gates. >> 8) Remove CLK_IGNORE_UNUSED flag for gate clocks. >> >> Rahul Sharma (2): >> clk/exynos5260: add macros and documentation for exynos5260 >> clk/exynos5260: add clock file for exynos5260 >> >> .../devicetree/bindings/clock/exynos5260-clock.txt | 190 ++ >> drivers/clk/samsung/Makefile | 1 + >> drivers/clk/samsung/clk-exynos5260.c | 1980 >> ++++++++++++++++++++ >> drivers/clk/samsung/clk-exynos5260.h | 459 +++++ >> include/dt-bindings/clock/exynos5260-clk.h | 469 +++++ >> 5 files changed, 3099 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/clock/exynos5260-clock.txt >> create mode 100644 drivers/clk/samsung/clk-exynos5260.c >> create mode 100644 drivers/clk/samsung/clk-exynos5260.h >> create mode 100644 include/dt-bindings/clock/exynos5260-clk.h >> > > Looks good to me, will apply if no comments show up for few more days. > > Best regards, > Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |