Thanks for this patch series! I've got some comments below... Regards, Hans On 03/19/2014 08:13 AM, Shaik Ameer Basha wrote: > This patch adds memory to memory (m2m) interface functionality > for the SCALER driver. > > [arun.kk@xxxxxxxxxxx: fix compilation issues] > > Signed-off-by: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx> > Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx> > Reviewed-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> > --- > drivers/media/platform/exynos-scaler/scaler-m2m.c | 788 +++++++++++++++++++++ > 1 file changed, 788 insertions(+) > create mode 100644 drivers/media/platform/exynos-scaler/scaler-m2m.c > > diff --git a/drivers/media/platform/exynos-scaler/scaler-m2m.c b/drivers/media/platform/exynos-scaler/scaler-m2m.c > new file mode 100644 > index 0000000..7b21a17 > --- /dev/null > +++ b/drivers/media/platform/exynos-scaler/scaler-m2m.c > @@ -0,0 +1,788 @@ > +/* > + * Copyright (c) 2014 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Samsung EXYNOS5 SoC series SCALER driver > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/module.h> > +#include <linux/pm_runtime.h> > +#include <linux/slab.h> > + > +#include <media/v4l2-ioctl.h> > + > +#include "scaler-regs.h" > + > +#define SCALER_DEF_PIX_FMT V4L2_PIX_FMT_RGB32 > +#define SCALER_DEF_WIDTH 1280 > +#define SCALER_DEF_HEIGHT 720 > + > +static int scaler_m2m_ctx_stop_req(struct scaler_ctx *ctx) > +{ > + struct scaler_ctx *curr_ctx; > + struct scaler_dev *scaler = ctx->scaler_dev; > + int ret; > + > + curr_ctx = v4l2_m2m_get_curr_priv(scaler->m2m.m2m_dev); > + if (!scaler_m2m_pending(scaler) || (curr_ctx != ctx)) > + return 0; > + > + scaler_ctx_state_lock_set(SCALER_CTX_STOP_REQ, ctx); > + ret = wait_event_timeout(scaler->irq_queue, > + !scaler_ctx_state_is_set(SCALER_CTX_STOP_REQ, ctx), > + SCALER_SHUTDOWN_TIMEOUT); > + > + return ret == 0 ? -ETIMEDOUT : ret; > +} > + > +static int scaler_m2m_start_streaming(struct vb2_queue *q, unsigned int count) > +{ > + struct scaler_ctx *ctx = q->drv_priv; > + int ret; > + > + ret = pm_runtime_get_sync(&ctx->scaler_dev->pdev->dev); > + > + return ret > 0 ? 0 : ret; > +} If an error occurs, then all queued buffers must be returned to the vb2 core with vb2_buffer_done with state VB2_BUF_STATE_QUEUED. A lot of vb2 instrumentation has been added in recent weeks to check for correct buffer handling, and this was one of the corner cases that was never handled correctly. If you compile with the VIDEO_ADV_DEBUG config option you'll see warnings appearing if this function returns an error and the buffers aren't requeued. It's a good test to do. > + > +static int scaler_m2m_stop_streaming(struct vb2_queue *q) > +{ > + struct scaler_ctx *ctx = q->drv_priv; > + int ret; > + > + ret = scaler_m2m_ctx_stop_req(ctx); > + if (ret < 0) > + scaler_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); > + > + pm_runtime_put(&ctx->scaler_dev->pdev->dev); > + > + return 0; > +} > + > +void scaler_m2m_job_finish(struct scaler_ctx *ctx, int vb_state) > +{ > + struct vb2_buffer *src_vb, *dst_vb; > + > + if (!ctx || !ctx->m2m_ctx) > + return; > + > + src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); > + dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); > + > + if (src_vb && dst_vb) { > + v4l2_m2m_buf_done(src_vb, vb_state); > + v4l2_m2m_buf_done(dst_vb, vb_state); > + > + v4l2_m2m_job_finish(ctx->scaler_dev->m2m.m2m_dev, > + ctx->m2m_ctx); > + } > +} > + > +static void scaler_m2m_job_abort(void *priv) > +{ > + struct scaler_ctx *ctx = priv; > + int ret; > + > + ret = scaler_m2m_ctx_stop_req(ctx); > + if (ret < 0) > + scaler_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); > +} > + > +static int scaler_get_bufs(struct scaler_ctx *ctx) > +{ > + struct scaler_frame *s_frame, *d_frame; > + struct vb2_buffer *src_vb, *dst_vb; > + int ret; > + > + s_frame = &ctx->s_frame; > + d_frame = &ctx->d_frame; > + > + src_vb = v4l2_m2m_next_src_buf(ctx->m2m_ctx); > + ret = scaler_prepare_addr(ctx, src_vb, s_frame, &s_frame->addr); > + if (ret < 0) > + return ret; > + > + dst_vb = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); > + ret = scaler_prepare_addr(ctx, dst_vb, d_frame, &d_frame->addr); > + if (ret < 0) > + return ret; > + > + dst_vb->v4l2_buf.timestamp = src_vb->v4l2_buf.timestamp; > + > + return 0; > +} > + > +static void scaler_m2m_device_run(void *priv) > +{ > + struct scaler_ctx *ctx = priv; > + struct scaler_dev *scaler; > + unsigned long flags; > + int ret; > + bool is_stopped; > + > + if (WARN(!ctx, "Null hardware context\n")) > + return; > + > + scaler = ctx->scaler_dev; > + spin_lock_irqsave(&scaler->slock, flags); > + > + set_bit(ST_M2M_PEND, &scaler->state); > + > + /* Reconfigure hardware if the context has changed. */ > + if (scaler->m2m.ctx != ctx) { > + scaler_dbg(scaler, "scaler->m2m.ctx = 0x%p, current_ctx = 0x%p", > + scaler->m2m.ctx, ctx); > + ctx->state |= SCALER_PARAMS; > + scaler->m2m.ctx = ctx; > + } > + > + is_stopped = ctx->state & SCALER_CTX_STOP_REQ; > + ctx->state &= ~SCALER_CTX_STOP_REQ; > + if (is_stopped) { > + wake_up(&scaler->irq_queue); > + goto unlock; > + } > + > + ret = scaler_get_bufs(ctx); > + if (ret < 0) { > + scaler_dbg(scaler, "Wrong address\n"); > + goto unlock; > + } > + > + scaler_hw_address_queue_reset(ctx); > + scaler_set_prefbuf(scaler, &ctx->s_frame); > + scaler_hw_set_input_addr(scaler, &ctx->s_frame.addr); > + scaler_hw_set_output_addr(scaler, &ctx->d_frame.addr); > + scaler_hw_set_csc_coeff(ctx); > + > + if (ctx->state & SCALER_PARAMS) { > + scaler_hw_set_irq(scaler, SCALER_INT_FRAME_END, false); > + if (scaler_set_scaler_info(ctx)) { > + scaler_dbg(scaler, "Scaler setup error"); > + goto unlock; > + } > + > + scaler_hw_set_in_size(ctx); > + scaler_hw_set_in_image_format(ctx); > + > + scaler_hw_set_out_size(ctx); > + scaler_hw_set_out_image_format(ctx); > + > + scaler_hw_set_scaler_ratio(ctx); > + scaler_hw_set_rotation(ctx); > + } > + > + ctx->state &= ~SCALER_PARAMS; > + scaler_hw_enable_control(scaler, true); > + > + spin_unlock_irqrestore(&scaler->slock, flags); > + return; > + > +unlock: > + ctx->state &= ~SCALER_PARAMS; > + spin_unlock_irqrestore(&scaler->slock, flags); > +} > + > +static int scaler_m2m_queue_setup(struct vb2_queue *vq, > + const struct v4l2_format *fmt, > + unsigned int *num_buffers, unsigned int *num_planes, > + unsigned int sizes[], void *allocators[]) > +{ > + struct scaler_ctx *ctx = vb2_get_drv_priv(vq); > + struct scaler_frame *frame; > + int i; > + > + frame = ctx_get_frame(ctx, vq->type); > + if (IS_ERR(frame)) > + return PTR_ERR(frame); > + > + if (!frame->fmt) > + return -EINVAL; > + > + *num_planes = frame->fmt->num_planes; > + for (i = 0; i < frame->fmt->num_planes; i++) { > + sizes[i] = frame->payload[i]; > + allocators[i] = ctx->scaler_dev->alloc_ctx; > + } > + return 0; > +} > + > +static int scaler_m2m_buf_prepare(struct vb2_buffer *vb) > +{ > + struct scaler_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); > + struct scaler_frame *frame; > + int i; > + > + frame = ctx_get_frame(ctx, vb->vb2_queue->type); > + if (IS_ERR(frame)) > + return PTR_ERR(frame); > + > + for (i = 0; i < frame->fmt->num_planes; i++) > + vb2_set_plane_payload(vb, i, frame->payload[i]); This sets the payload for buffers going to the hardware as well, but it should check whether the payload is large enough instead. I.e., if someone passes a buffer with too little data an error should be returned. > + > + return 0; > +} > + > +static void scaler_m2m_buf_queue(struct vb2_buffer *vb) > +{ > + struct scaler_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); > + > + scaler_dbg(ctx->scaler_dev, "ctx: %p, ctx->state: 0x%x", > + ctx, ctx->state); > + > + if (ctx->m2m_ctx) > + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); > +} > + > +static void scaler_lock(struct vb2_queue *vq) > +{ > + struct scaler_ctx *ctx = vb2_get_drv_priv(vq); > + mutex_lock(&ctx->scaler_dev->lock); > +} > + > +static void scaler_unlock(struct vb2_queue *vq) > +{ > + struct scaler_ctx *ctx = vb2_get_drv_priv(vq); > + mutex_unlock(&ctx->scaler_dev->lock); > +} > + > +static struct vb2_ops scaler_m2m_qops = { > + .queue_setup = scaler_m2m_queue_setup, > + .buf_prepare = scaler_m2m_buf_prepare, > + .buf_queue = scaler_m2m_buf_queue, > + .wait_prepare = scaler_unlock, > + .wait_finish = scaler_lock, > + .stop_streaming = scaler_m2m_stop_streaming, > + .start_streaming = scaler_m2m_start_streaming, > +}; Have you tested this driver with the latest v4l2-compliance? Just run 'v4l2-compliance -s' and it should work. If you find problems with v4l2-compliance itself, please let me know. It hasn't seen much testing with m2m drivers, so feedback is welcome. > + > +static int scaler_m2m_querycap(struct file *file, void *fh, > + struct v4l2_capability *cap) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + struct scaler_dev *scaler = ctx->scaler_dev; > + > + cap->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_M2M_MPLANE; > + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; > + > + strlcpy(cap->driver, scaler->pdev->name, sizeof(cap->driver)); > + strlcpy(cap->card, scaler->pdev->name, sizeof(cap->card)); > + strlcpy(cap->bus_info, "platform:exynos5-scaler", > + sizeof(cap->bus_info)); > + > + return 0; > +} > + > +static int scaler_m2m_enum_fmt_mplane(struct file *file, void *priv, > + struct v4l2_fmtdesc *f) > +{ > + return scaler_enum_fmt_mplane(f); > +} > + > +static int scaler_m2m_g_fmt_mplane(struct file *file, void *fh, > + struct v4l2_format *f) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + > + return scaler_g_fmt_mplane(ctx, f); > +} > + > +static int scaler_m2m_try_fmt_mplane(struct file *file, void *fh, > + struct v4l2_format *f) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + > + return scaler_try_fmt_mplane(ctx, f); > +} > + > +static int scaler_m2m_set_default_format(struct scaler_ctx *ctx) > +{ > + struct scaler_frame *frame; > + u32 def_pixformat = SCALER_DEF_PIX_FMT; > + int i; > + > + frame = &ctx->s_frame; > + > + frame->colorspace = V4L2_COLORSPACE_REC709; > + frame->fmt = scaler_find_fmt(&def_pixformat, -1); > + if (!frame->fmt) > + return -EINVAL; > + > + scaler_set_frame_size(frame, SCALER_DEF_WIDTH, SCALER_DEF_HEIGHT); > + for (i = 0; i < frame->fmt->num_planes; i++) > + frame->payload[i] = SCALER_DEF_WIDTH * SCALER_DEF_HEIGHT * > + (frame->fmt->depth[i] / 8); > + > + scaler_ctx_state_lock_set(SCALER_PARAMS, ctx); > + > + /* Apply the same src frame settings to dst frame */ > + ctx->d_frame = ctx->s_frame; > + > + return 0; > +} > + > + > +static int scaler_m2m_s_fmt_mplane(struct file *file, void *fh, > + struct v4l2_format *f) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + struct vb2_queue *vq; > + struct scaler_frame *frame; > + struct v4l2_pix_format_mplane *pix; > + int i, ret = 0; > + > + ret = scaler_m2m_try_fmt_mplane(file, fh, f); > + if (ret < 0) > + return ret; > + > + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); > + > + if (vb2_is_streaming(vq)) { > + scaler_dbg(ctx->scaler_dev, "queue (%d) busy", f->type); > + return -EBUSY; > + } > + > + if (V4L2_TYPE_IS_OUTPUT(f->type)) > + frame = &ctx->s_frame; > + else > + frame = &ctx->d_frame; > + > + pix = &f->fmt.pix_mp; > + frame->colorspace = pix->colorspace; > + frame->fmt = scaler_find_fmt(&pix->pixelformat, -1); > + if (!frame->fmt) > + return -EINVAL; > + > + for (i = 0; i < frame->fmt->num_planes; i++) > + frame->payload[i] = pix->plane_fmt[i].sizeimage; > + > + scaler_set_frame_size(frame, pix->width, pix->height); > + scaler_ctx_state_lock_set(SCALER_PARAMS, ctx); > + > + scaler_dbg(ctx->scaler_dev, "f_w: %d, f_h: %d", > + frame->f_width, frame->f_height); > + > + return 0; > +} > + > +static int scaler_m2m_reqbufs(struct file *file, void *fh, > + struct v4l2_requestbuffers *reqbufs) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + struct scaler_dev *scaler = ctx->scaler_dev; > + u32 max_cnt; > + > + if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) > + max_cnt = scaler->variant->in_buf_cnt; > + else > + max_cnt = scaler->variant->out_buf_cnt; > + > + if (reqbufs->count > max_cnt) { > + /* Adjust the count value as per driver supports */ > + reqbufs->count = max_cnt; > + } > + > + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); > +} > + > +static int scaler_m2m_expbuf(struct file *file, void *fh, > + struct v4l2_exportbuffer *eb) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + return v4l2_m2m_expbuf(file, ctx->m2m_ctx, eb); > +} > + > +static int scaler_m2m_querybuf(struct file *file, void *fh, > + struct v4l2_buffer *buf) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); > +} > + > +static int scaler_m2m_qbuf(struct file *file, void *fh, > + struct v4l2_buffer *buf) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); > +} > + > +static int scaler_m2m_dqbuf(struct file *file, void *fh, > + struct v4l2_buffer *buf) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); > +} > + > +static int scaler_m2m_streamon(struct file *file, void *fh, > + enum v4l2_buf_type type) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); > +} > + > +static int scaler_m2m_streamoff(struct file *file, void *fh, > + enum v4l2_buf_type type) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); > +} v4l2-mem2mem.h defines a bunch of ioctl and file-operation helpers that you can use directly rather than creating these small stubs. Just set the m2m_ctx field of the v4l2_fh struct to ctx->m2m_ctx and you are good to go. This means that you need to do a 'container_of' to go from the m2m_ctx to the scaler_ctx pointer. > + > +/* Return 1 if rectangle a is enclosed in rectangle b, or 0 otherwise. */ > +static int is_rectangle_enclosed(struct v4l2_rect *a, struct v4l2_rect *b) > +{ > + return !((a->left < b->left) || > + (a->top < b->top) || > + (a->left + a->width > b->left + b->width) || > + (a->top + a->height > b->top + b->height)); > +} > + > +static int scaler_m2m_g_selection(struct file *file, void *fh, > + struct v4l2_selection *s) > +{ > + struct scaler_frame *frame; > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + > + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) && > + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)) > + return -EINVAL; > + > + frame = ctx_get_frame(ctx, s->type); > + if (IS_ERR(frame)) > + return PTR_ERR(frame); > + > + if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { > + if ((s->target == V4L2_SEL_TGT_CROP_DEFAULT) || > + (s->target == V4L2_SEL_TGT_CROP_BOUNDS)) { > + s->r.left = 0; > + s->r.top = 0; > + s->r.width = frame->f_width; > + s->r.height = frame->f_height; > + return 0; > + } > + > + if (s->target == V4L2_SEL_TGT_CROP) { > + s->r.left = frame->selection.left; > + s->r.top = frame->selection.top; > + s->r.width = frame->selection.width; > + s->r.height = frame->selection.height; > + return 0; > + } > + } else { > + if ((s->target == V4L2_SEL_TGT_COMPOSE_DEFAULT) || > + (s->target == V4L2_SEL_TGT_COMPOSE_BOUNDS)) { > + s->r.left = 0; > + s->r.top = 0; > + s->r.width = frame->f_width; > + s->r.height = frame->f_height; > + return 0; > + } > + > + if (s->target == V4L2_SEL_TGT_COMPOSE) { > + s->r.left = frame->selection.left; > + s->r.top = frame->selection.top; > + s->r.width = frame->selection.width; > + s->r.height = frame->selection.height; > + return 0; > + } > + } > + > + return -EINVAL; > +} > + > +static int scaler_m2m_s_selection(struct file *file, void *fh, > + struct v4l2_selection *s) > +{ > + struct scaler_frame *frame; > + struct scaler_ctx *ctx = fh_to_ctx(fh); > + struct v4l2_crop cr; > + struct scaler_variant *variant = ctx->scaler_dev->variant; > + int ret; > + > + cr.type = s->type; > + cr.c = s->r; > + > + if (!(((s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) && > + (s->target == V4L2_SEL_TGT_CROP)) || > + ((s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) && > + (s->target == V4L2_SEL_TGT_COMPOSE)))) > + return -EINVAL; > + > + frame = ctx_get_frame(ctx, s->type); > + > + ret = scaler_try_crop(ctx, &cr); > + if (ret < 0) > + return ret; > + > + if (s->flags & V4L2_SEL_FLAG_LE && > + !is_rectangle_enclosed(&cr.c, &s->r)) > + return -ERANGE; > + > + if (s->flags & V4L2_SEL_FLAG_GE && > + !is_rectangle_enclosed(&s->r, &cr.c)) > + return -ERANGE; > + > + s->r = cr.c; > + > + /* Check to see if scaling ratio is within supported range */ > + if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) > + ret = scaler_check_scaler_ratio(variant, > + cr.c.width, cr.c.height, > + ctx->d_frame.selection.width, > + ctx->d_frame.selection.height, > + ctx->ctrls_scaler.rotate->val); > + else > + ret = scaler_check_scaler_ratio(variant, > + ctx->s_frame.selection.width, > + ctx->s_frame.selection.height, > + cr.c.width, cr.c.height, > + ctx->ctrls_scaler.rotate->val); > + > + if (ret < 0) { > + scaler_dbg(ctx->scaler_dev, "Out of scaler range"); > + return -EINVAL; > + } > + > + frame->selection = cr.c; > + > + scaler_ctx_state_lock_set(SCALER_PARAMS, ctx); > + return 0; > +} > + > +static const struct v4l2_ioctl_ops scaler_m2m_ioctl_ops = { > + .vidioc_querycap = scaler_m2m_querycap, > + .vidioc_enum_fmt_vid_cap_mplane = scaler_m2m_enum_fmt_mplane, > + .vidioc_enum_fmt_vid_out_mplane = scaler_m2m_enum_fmt_mplane, > + .vidioc_g_fmt_vid_cap_mplane = scaler_m2m_g_fmt_mplane, > + .vidioc_g_fmt_vid_out_mplane = scaler_m2m_g_fmt_mplane, > + .vidioc_try_fmt_vid_cap_mplane = scaler_m2m_try_fmt_mplane, > + .vidioc_try_fmt_vid_out_mplane = scaler_m2m_try_fmt_mplane, > + .vidioc_s_fmt_vid_cap_mplane = scaler_m2m_s_fmt_mplane, > + .vidioc_s_fmt_vid_out_mplane = scaler_m2m_s_fmt_mplane, > + .vidioc_reqbufs = scaler_m2m_reqbufs, > + .vidioc_expbuf = scaler_m2m_expbuf, > + .vidioc_querybuf = scaler_m2m_querybuf, > + .vidioc_qbuf = scaler_m2m_qbuf, > + .vidioc_dqbuf = scaler_m2m_dqbuf, > + .vidioc_streamon = scaler_m2m_streamon, > + .vidioc_streamoff = scaler_m2m_streamoff, > + .vidioc_g_selection = scaler_m2m_g_selection, > + .vidioc_s_selection = scaler_m2m_s_selection > +}; > + > +static int queue_init(void *priv, struct vb2_queue *src_vq, > + struct vb2_queue *dst_vq) > +{ > + struct scaler_ctx *ctx = priv; > + int ret; > + > + memset(src_vq, 0, sizeof(*src_vq)); > + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; > + src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; > + src_vq->drv_priv = ctx; > + src_vq->ops = &scaler_m2m_qops; > + src_vq->mem_ops = &vb2_dma_contig_memops; > + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); > + > + ret = vb2_queue_init(src_vq); > + if (ret < 0) > + return ret; > + > + memset(dst_vq, 0, sizeof(*dst_vq)); > + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; > + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; > + dst_vq->drv_priv = ctx; > + dst_vq->ops = &scaler_m2m_qops; > + dst_vq->mem_ops = &vb2_dma_contig_memops; > + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); > + > + return vb2_queue_init(dst_vq); > +} > + > +static int scaler_m2m_open(struct file *file) > +{ > + struct scaler_dev *scaler = video_drvdata(file); > + struct scaler_ctx *ctx = NULL; > + int ret; > + > + scaler_dbg(scaler, "pid: %d, state: 0x%lx", > + task_pid_nr(current), scaler->state); > + > + if (mutex_lock_interruptible(&scaler->lock)) > + return -ERESTARTSYS; > + > + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); > + if (!ctx) { > + ret = -ENOMEM; > + goto unlock; > + } > + > + v4l2_fh_init(&ctx->fh, scaler->m2m.vfd); > + ret = scaler_ctrls_create(ctx); > + if (ret < 0) > + goto error_fh; > + > + /* Use separate control handler per file handle */ > + ctx->fh.ctrl_handler = &ctx->ctrl_handler; > + file->private_data = &ctx->fh; > + v4l2_fh_add(&ctx->fh); > + > + ctx->scaler_dev = scaler; > + /* Default color format */ > + ctx->s_frame.fmt = scaler_get_format(0); > + ctx->d_frame.fmt = scaler_get_format(0); > + ctx->flags = 0; > + > + ctx->m2m_ctx = v4l2_m2m_ctx_init(scaler->m2m.m2m_dev, ctx, queue_init); > + if (IS_ERR(ctx->m2m_ctx)) { > + scaler_dbg(scaler, "Failed to initialize m2m context"); > + ret = PTR_ERR(ctx->m2m_ctx); > + goto error_ctrls; > + } > + > + /* Apply default format settings */ > + ret = scaler_m2m_set_default_format(ctx); > + if (ret < 0) { > + scaler_dbg(scaler, "Failed to set default format settings"); > + goto error_ctrls; > + } > + > + if (v4l2_fh_is_singular_file(file)) > + set_bit(ST_M2M_OPEN, &scaler->state); > + > + scaler_dbg(scaler, "scaler m2m driver is opened, ctx(0x%p)", ctx); > + > + mutex_unlock(&scaler->lock); > + return 0; > + > +error_ctrls: > + scaler_ctrls_delete(ctx); > +error_fh: > + v4l2_fh_del(&ctx->fh); > + v4l2_fh_exit(&ctx->fh); > + kfree(ctx); > +unlock: > + mutex_unlock(&scaler->lock); > + return ret; > +} > + > +static int scaler_m2m_release(struct file *file) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(file->private_data); > + struct scaler_dev *scaler = ctx->scaler_dev; > + > + scaler_dbg(scaler, "pid: %d, state: 0x%lx", > + task_pid_nr(current), scaler->state); > + > + mutex_lock(&scaler->lock); > + > + if (v4l2_fh_is_singular_file(file)) > + clear_bit(ST_M2M_OPEN, &scaler->state); > + > + v4l2_m2m_ctx_release(ctx->m2m_ctx); > + scaler_ctrls_delete(ctx); > + v4l2_fh_del(&ctx->fh); > + v4l2_fh_exit(&ctx->fh); > + > + kfree(ctx); > + > + mutex_unlock(&scaler->lock); > + return 0; > +} > + > +static unsigned int scaler_m2m_poll(struct file *file, > + struct poll_table_struct *wait) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(file->private_data); > + struct scaler_dev *scaler = ctx->scaler_dev; > + int ret; > + > + if (mutex_lock_interruptible(&scaler->lock)) > + return -ERESTARTSYS; > + > + ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); > + mutex_unlock(&scaler->lock); > + > + return ret; > +} > + > +static int scaler_m2m_mmap(struct file *file, struct vm_area_struct *vma) > +{ > + struct scaler_ctx *ctx = fh_to_ctx(file->private_data); > + struct scaler_dev *scaler = ctx->scaler_dev; > + int ret; > + > + if (mutex_lock_interruptible(&scaler->lock)) > + return -ERESTARTSYS; > + > + ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); > + mutex_unlock(&scaler->lock); > + > + return ret; > +} > + > +static const struct v4l2_file_operations scaler_m2m_fops = { > + .owner = THIS_MODULE, > + .open = scaler_m2m_open, > + .release = scaler_m2m_release, > + .poll = scaler_m2m_poll, > + .unlocked_ioctl = video_ioctl2, > + .mmap = scaler_m2m_mmap, > +}; > + > +static struct v4l2_m2m_ops scaler_m2m_ops = { > + .device_run = scaler_m2m_device_run, > + .job_abort = scaler_m2m_job_abort, > +}; > + > +int scaler_register_m2m_device(struct scaler_dev *scaler) > +{ > + struct platform_device *pdev; > + int ret; > + > + if (!scaler) > + return -ENODEV; > + > + pdev = scaler->pdev; > + > + scaler->vdev.fops = &scaler_m2m_fops; > + scaler->vdev.ioctl_ops = &scaler_m2m_ioctl_ops; > + scaler->vdev.release = video_device_release_empty; > + scaler->vdev.lock = &scaler->lock; > + scaler->vdev.vfl_dir = VFL_DIR_M2M; > + scaler->vdev.v4l2_dev = &scaler->v4l2_dev; > + snprintf(scaler->vdev.name, sizeof(scaler->vdev.name), "%s:m2m", > + SCALER_MODULE_NAME); > + > + video_set_drvdata(&scaler->vdev, scaler); > + > + scaler->m2m.vfd = &scaler->vdev; > + scaler->m2m.m2m_dev = v4l2_m2m_init(&scaler_m2m_ops); > + if (IS_ERR(scaler->m2m.m2m_dev)) { > + dev_err(&pdev->dev, "failed to initialize v4l2-m2m device\n"); > + return PTR_ERR(scaler->m2m.m2m_dev); > + } > + > + ret = video_register_device(&scaler->vdev, VFL_TYPE_GRABBER, -1); > + if (ret < 0) { > + dev_err(&pdev->dev, > + "%s(): failed to register video device\n", __func__); > + v4l2_m2m_release(scaler->m2m.m2m_dev); > + return ret; > + } > + > + dev_info(&pdev->dev, "scaler m2m driver registered as /dev/video%d", > + scaler->vdev.num); > + return 0; > +} > + > +void scaler_unregister_m2m_device(struct scaler_dev *scaler) > +{ > + if (scaler) { > + video_unregister_device(scaler->m2m.vfd); > + v4l2_m2m_release(scaler->m2m.m2m_dev); > + } > +} > Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |