There are not the clock controller of ppmudmc0/1. This patch control the clock
of ppmudmc0/1 which is used for monitoring memory bus utilization.
Also, this patch code clean about regulator control and free resource
when calling exit/remove function.
For example,
busfreq@106A0000 {
compatible = "samsung,exynos4x12-busfreq";
/* Clock for PPMUDMC0/1 */
clocks = <&clock CLK_PPMUDMC0>, <&clock CLK_PPMUDMC1>;
clock-names = "ppmudmc0", "ppmudmc1";
/* Regulator for MIF/INT block */
vdd_mif-supply = <&buck1_reg>;
vdd_int-supply = <&buck3_reg>;
};
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
drivers/devfreq/exynos/exynos4_bus.c | 104 ++++++++++++++++++++++++++++++-----
1 file changed, 91 insertions(+), 13 deletions(-)
diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c
index 8ccbb31..60539e8 100644
--- a/drivers/devfreq/exynos/exynos4_bus.c
+++ b/drivers/devfreq/exynos/exynos4_bus.c
@@ -62,6 +62,11 @@ enum exynos_ppmu_idx {
PPMU_END,
};
+static const char *exynos_ppmu_clk_name[] = {
+ [PPMU_DMC0] = "ppmudmc0",
+ [PPMU_DMC1] = "ppmudmc1",
+};
+
#define EX4210_LV_MAX LV_2
#define EX4x12_LV_MAX LV_4
#define EX4210_LV_NUM (LV_2 + 1)
@@ -86,6 +91,7 @@ struct busfreq_data {
struct regulator *vdd_mif; /* Exynos4412/4212 only */
struct busfreq_opp_info curr_oppinfo;
struct exynos_ppmu ppmu[PPMU_END];
+ struct clk *clk_ppmu[PPMU_END];
struct notifier_block pm_notifier;
struct mutex lock;
@@ -724,6 +730,19 @@ static void exynos4_bus_exit(struct device *dev)
struct busfreq_data *data = dev_get_drvdata(dev);
int i;
+ /*
+ * Un-map memory map and disable regulator/clocks
+ * to prevent power leakage.
+ */
+ regulator_disable(data->vdd_int);
+ if (data->type == TYPE_BUSF_EXYNOS4x12)
+ regulator_disable(data->vdd_mif);
+
+ for (i = 0; i < PPMU_END; i++) {
+ if (data->clk_ppmu[i])
+ clk_disable_unprepare(data->clk_ppmu[i]);
+ }
+
for (i = 0; i < PPMU_END; i++) {
if (data->ppmu[i].hw_base)
iounmap(data->ppmu[i].hw_base);
@@ -991,6 +1010,7 @@ static int exynos4_busfreq_parse_dt(struct busfreq_data *data)
{
struct device *dev = data->dev;
struct device_node *np = dev->of_node;
+ const char **clk_name = exynos_ppmu_clk_name;
int i, ret;
if (!np) {
@@ -1009,8 +1029,70 @@ static int exynos4_busfreq_parse_dt(struct busfreq_data *data)
}
}
+ /*
+ * Get PPMU's clocks to control them. But, if PPMU's clocks
+ * is default 'pass' state, this driver don't need control
+ * PPMU's clock.
+ */
+ for (i = 0; i < PPMU_END; i++) {
+ data->clk_ppmu[i] = devm_clk_get(dev, clk_name[i]);
+ if (IS_ERR_OR_NULL(data->clk_ppmu[i])) {
+ dev_warn(dev, "Cannot get %s clock\n", clk_name[i]);
+ data->clk_ppmu[i] = NULL;
+ }
+
+ ret = clk_prepare_enable(data->clk_ppmu[i]);
+ if (ret < 0) {
+ dev_warn(dev, "Cannot enable %s clock\n", clk_name[i]);
+ data->clk_ppmu[i] = NULL;
+ goto err_clocks;
+ }
+ }
+
+ /* Get regulator to control voltage of int block */
+ data->vdd_int = devm_regulator_get(dev, "vdd_int");
+ if (IS_ERR(data->vdd_int)) {
+ dev_err(dev, "Failed to get the regulator of vdd_int\n");
+ ret = PTR_ERR(data->vdd_int);
+ goto err_clocks;
+ }
+ ret = regulator_enable(data->vdd_int);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enable regulator of vdd_int\n");
+ goto err_clocks;
+ }
+
+ switch (data->type) {
+ case TYPE_BUSF_EXYNOS4210:
+ break;
+ case TYPE_BUSF_EXYNOS4x12:
+ /* Get regulator to control voltage of mif blk if Exynos4x12 */
+ data->vdd_mif = devm_regulator_get(dev, "vdd_mif");
+ if (IS_ERR(data->vdd_mif)) {
+ dev_err(dev, "Failed to get the regulator vdd_mif\n");
+ ret = PTR_ERR(data->vdd_mif);
+ goto err_regulator;
+ }
+ ret = regulator_enable(data->vdd_mif);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enable regulator of vdd_mif\n");
+ goto err_regulator;
+ }
+ break;
+ default:
+ dev_err(dev, "Unknown device type : %d\n", data->type);
+ return -EINVAL;
+ };
+
return 0;
+err_regulator:
+ regulator_disable(data->vdd_int);
+err_clocks:
+ for (i = 0; i < PPMU_END; i++) {
+ if (data->clk_ppmu[i])
+ clk_disable_unprepare(data->clk_ppmu[i]);
+ }
err_iomap:
for (i = 0; i < PPMU_END; i++) {
if (data->ppmu[i].hw_base)
@@ -1075,19 +1157,6 @@ static int exynos4_busfreq_probe(struct platform_device *pdev)
return err;
}
- data->vdd_int = devm_regulator_get(dev, "vdd_int");
- if (IS_ERR(data->vdd_int)) {
- dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
- return PTR_ERR(data->vdd_int);
- }
- if (data->type == TYPE_BUSF_EXYNOS4x12) {
- data->vdd_mif = devm_regulator_get(dev, "vdd_mif");
- if (IS_ERR(data->vdd_mif)) {
- dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n");
- return PTR_ERR(data->vdd_mif);
- }
- }
-
rcu_read_lock();
opp = dev_pm_opp_find_freq_floor(dev,
&exynos4_devfreq_profile.initial_freq);
@@ -1147,6 +1216,15 @@ err_notifier_opp:
return err;
err_devfreq:
+ regulator_disable(data->vdd_int);
+ if (data->type == TYPE_BUSF_EXYNOS4x12)
+ regulator_disable(data->vdd_mif);
+
+ for (i = 0; i < PPMU_END; i++) {
+ if (data->clk_ppmu[i])
+ clk_disable_unprepare(data->clk_ppmu[i]);
+ }
+
for (i = 0; i < PPMU_END; i++) {
if (data->ppmu[i].hw_base)
iounmap(data->ppmu[i].hw_base);
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
