On 13 March 2014 10:31, Rahul Sharma <r.sh.open@xxxxxxxxx> wrote: > Thanks Pankaj, > > On 13 March 2014 06:19, Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx> wrote: >> Hi Rahul, >> >> >> On 03/13/2014 12:16 AM, Rahul Sharma wrote: >>> >>> The patch adds the dts files for xyref5260 board which >>> is based on Exynos5260 Evt0 sample. >>> >>> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx> >>> --- >>> arch/arm/boot/dts/Makefile | 1 + >>> arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts | 110 >>> +++++++++++++++++++++++ >>> 2 files changed, 111 insertions(+) >>> create mode 100644 arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts >>> >>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>> index b9d6a8b..5a391bf 100644 >>> --- a/arch/arm/boot/dts/Makefile >>> +++ b/arch/arm/boot/dts/Makefile >>> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ >>> exynos5250-arndale.dtb \ >>> exynos5250-smdk5250.dtb \ >>> exynos5250-snow.dtb \ >>> + exynos5260-xyref5260-evt0.dtb \ >>> exynos5420-arndale-octa.dtb \ >>> exynos5420-smdk5420.dtb \ >>> exynos5440-sd5v1.dtb \ >>> diff --git a/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts >>> b/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts >>> new file mode 100644 >>> index 0000000..d7d0aeb >>> --- /dev/null >>> +++ b/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts >>> @@ -0,0 +1,110 @@ >>> +/* >>> + * SAMSUNG XYREF5260 EVT0 board device tree source >>> + * >>> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >>> + * http://www.samsung.com >>> + * >>> + * This program is free software; you can redistribute it and/or modify >>> + * it under the terms of the GNU General Public License version 2 as >>> + * published by the Free Software Foundation. >>> +*/ >>> + >>> +/dts-v1/; >>> +#include "exynos5260.dtsi" >>> + >>> +/ { >>> + model = "SAMSUNG XYREF5260 EVT0 board based on EXYNOS5260"; >>> + compatible = "samsung,xyref5260", "samsung,exynos5260"; >>> + >>> + memory { >>> + reg = <0x20000000 0x80000000>; >>> + }; >>> + >>> + chosen { >>> + bootargs = "console=ttySAC2,115200"; >>> + }; >>> + >>> + clocks { >>> + fin_pll: xxti { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <24000000>; >>> + clock-output-names = "fin_pll"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + xrtcxti: xrtcxti { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <32768>; >>> + clock-output-names = "xrtcxti"; >>> + }; >> >> >> clock-cells property is missing here. >> > I have added #clock-cells only for clocks which are supposed to be referred. IMO we don't need it otherwise. > >> >>> + >>> + spdif_extclk: ioclk_spdif_extclk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <49152000>; >>> + clock-output-names = "ioclk_spdif_extclk"; >>> + }; >> >> >> ditto. >> >>> + }; >>> +}; >> >> >> May I know why other phyclocks and ioclks have not been added? >> > > Phyclocks should be added in SoC file. Please refer the other patch. > > Ioclocks have 2 dimensions. 1) A board may or may not have these. > But if board doesn't have them, we may end up with orphans in clock > tree. 2) Adding them in SoC is not meaningful because rate is board > dependent and cannot be mentioned in SoC file. Without rate, probe > will not be successful. > > What I followed here is adding IO clocks which are resulting into > orphan clocks. > > What we can do is to allow the registration of fixed-io-clocks in clock > driver which are provided without RATE? If this looks good, I can post > the respective patch for clock driver and dt correction. > > I want to request experts to comment on this. > > Regards, > Rahul Sharma > >> >>> + >>> +&pinctrl_0 { >>> + hdmi_hpd_irq: hdmi-hpd-irq { >>> + samsung,pins = "gpx3-7"; >>> + samsung,pin-function = <0>; >>> + samsung,pin-pud = <1>; >>> + samsung,pin-drv = <0>; >>> + }; >>> +}; >>> + >>> +&uart0 { >>> + status = "okay"; >>> +}; >>> + >>> +&uart1 { >>> + status = "okay"; >>> +}; >>> + >>> +&uart2 { >>> + status = "okay"; >>> +}; >>> + >>> +&uart3 { >>> + status = "okay"; >>> +}; >>> + >>> +&mmc_0 { >>> + status = "okay"; >>> + num-slots = <1>; >>> + broken-cd; >>> + bypass-smu; >>> + supports-highspeed; >>> + supports-hs200-mode; /* 200 Mhz */ >>> + card-detect-delay = <200>; >>> + samsung,dw-mshc-ciu-div = <3>; >>> + samsung,dw-mshc-sdr-timing = <0 4>; >>> + samsung,dw-mshc-ddr-timing = <0 2>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 >>> &sd0_bus8>; >>> + >>> + slot@0 { >>> + reg = <0>; >>> + bus-width = <8>; >>> + }; >>> +}; >>> + >>> +&mmc_2 { >>> + status = "okay"; >>> + num-slots = <1>; >>> + supports-highspeed; >>> + card-detect-delay = <200>; >>> + samsung,dw-mshc-ciu-div = <3>; >>> + samsung,dw-mshc-sdr-timing = <2 3>; >>> + samsung,dw-mshc-ddr-timing = <1 2>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; >>> + >>> + slot@0 { >>> + reg = <0>; >>> + bus-width = <4>; >>> + disable-wp; >>> + }; >>> +}; >> >> >> >> -- >> Best Regards, >> Pankaj Dubey >> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |