Add support for pll2650xx in samsung pll file. This PLL variant
is close to pll36xx but uses CON2 registers instead of CON1.
Aud_pll in Exynos5260 is pll2650xx and uses this code.
Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
---
drivers/clk/samsung/clk-pll.c | 101 +++++++++++++++++++++++++++++++++++++++++
drivers/clk/samsung/clk-pll.h | 1 +
2 files changed, 102 insertions(+)
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index 18e42ef..b07fad2 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -1049,6 +1049,101 @@ static const struct clk_ops samsung_pll2550xx_clk_min_ops = {
.recalc_rate = samsung_pll2550xx_recalc_rate,
};
+/*
+ * PLL2650XX Clock Type
+ */
+
+/* Maximum lock time can be 3000 * PDIV cycles */
+#define PLL2650XX_LOCK_FACTOR 3000
+
+#define PLL2650XX_MDIV_SHIFT 9
+#define PLL2650XX_PDIV_SHIFT 3
+#define PLL2650XX_SDIV_SHIFT 0
+#define PLL2650XX_KDIV_SHIFT 0
+#define PLL2650XX_MDIV_MASK 0x1ff
+#define PLL2650XX_PDIV_MASK 0x3f
+#define PLL2650XX_SDIV_MASK 0x7
+#define PLL2650XX_KDIV_MASK 0xffff
+#define PLL2650XX_PLL_ENABLE_SHIFT 23
+#define PLL2650XX_PLL_LOCKTIME_SHIFT 21
+#define PLL2650XX_PLL_FOUTMASK_SHIFT 31
+
+static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 mdiv, pdiv, sdiv, pll_con0, pll_con2;
+ s16 kdiv;
+ u64 fvco = parent_rate;
+
+ pll_con0 = __raw_readl(pll->con_reg);
+ pll_con2 = __raw_readl(pll->con_reg + 8);
+ mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK;
+ kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK);
+
+ fvco *= (mdiv << 16) + kdiv;
+ do_div(fvco, (pdiv << sdiv));
+ fvco >>= 16;
+
+ return (unsigned long)fvco;
+}
+
+static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 tmp, pll_con0, pll_con2;
+ const struct samsung_pll_rate_table *rate;
+
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ pll_con0 = __raw_readl(pll->con_reg);
+ pll_con2 = __raw_readl(pll->con_reg + 8);
+
+ /* Change PLL PMS values */
+ pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT |
+ PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT |
+ PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT);
+ pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT;
+ pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT;
+ pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT;
+ pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT;
+ pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT;
+
+ pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT);
+ pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK)
+ << PLL2650XX_KDIV_SHIFT;
+
+ /* Set PLL lock time. */
+ __raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg);
+
+ __raw_writel(pll_con0, pll->con_reg);
+ __raw_writel(pll_con2, pll->con_reg + 8);
+
+ do {
+ tmp = __raw_readl(pll->con_reg);
+ } while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT)));
+
+ return 0;
+}
+
+static const struct clk_ops samsung_pll2650xx_clk_ops = {
+ .recalc_rate = samsung_pll2650xx_recalc_rate,
+ .set_rate = samsung_pll2650xx_set_rate,
+ .round_rate = samsung_pll_round_rate,
+};
+
+static const struct clk_ops samsung_pll2650xx_clk_min_ops = {
+ .recalc_rate = samsung_pll2650xx_recalc_rate,
+};
+
static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
struct samsung_pll_clock *pll_clk,
void __iomem *base)
@@ -1157,6 +1252,12 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
else
init.ops = &samsung_pll2550xx_clk_ops;
break;
+ case pll_2650xx:
+ if (!pll->rate_table)
+ init.ops = &samsung_pll2650xx_clk_min_ops;
+ else
+ init.ops = &samsung_pll2650xx_clk_ops;
+ break;
default:
pr_warn("%s: Unknown pll type for pll clk %s\n",
__func__, pll_clk->name);
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index ec4bc1d..c0ed4d4 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -32,6 +32,7 @@ enum samsung_pll_type {
pll_s3c2410_upll,
pll_s3c2440_mpll,
pll_2550xx,
+ pll_2650xx,
};
#define PLL_35XX_RATE(_rate, _m, _p, _s) \
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
