On 06/03/2014 07:04, Tushar Behera :
> Most of the clock related dt-binding header files are located in
> dt-bindings/clock folder. It would be good to keep all the similar
> header files at a single location.
>
> Signed-off-by: Tushar Behera <tushar.behera@xxxxxxxxxx>
> CC: Rob Landley <rob@xxxxxxxxxxx>
> CC: Andrew Victor <linux@xxxxxxxxxxxx>
> CC: Jean-Christophe Plagniol-Villard <plagnioj@xxxxxxxxxxxx>
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> ---
> .../devicetree/bindings/clock/at91-clock.txt | 2 +-
> arch/arm/boot/dts/sama5d3.dtsi | 2 +-
> arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +-
> arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +-
> arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +-
> include/dt-bindings/{clk => clock}/at91.h | 0
> 6 files changed, 5 insertions(+), 5 deletions(-)
> rename include/dt-bindings/{clk => clock}/at91.h (100%)
>
> diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
> index cd5e239..6794cdc 100644
> --- a/Documentation/devicetree/bindings/clock/at91-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
> @@ -62,7 +62,7 @@ Required properties for PMC node:
> - interrupt-controller : tell that the PMC is an interrupt controller.
> - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
> and reflect the bit position in the PMC_ER/DR/SR registers.
> - You can use the dt macros defined in dt-bindings/clk/at91.h.
> + You can use the dt macros defined in dt-bindings/clock/at91.h.
> 0 (AT91_PMC_MOSCS) -> main oscillator ready
> 1 (AT91_PMC_LOCKA) -> PLL A ready
> 2 (AT91_PMC_LOCKB) -> PLL B ready
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index 3d5faf8..8c977b5 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -13,7 +13,7 @@
> #include <dt-bindings/pinctrl/at91.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/clk/at91.h>
> +#include <dt-bindings/clock/at91.h>
>
> / {
> model = "Atmel SAMA5D3 family SoC";
> diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
> index b029fe7..1b02208 100644
> --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
> +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
> @@ -9,7 +9,7 @@
>
> #include <dt-bindings/pinctrl/at91.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> -#include <dt-bindings/clk/at91.h>
> +#include <dt-bindings/clock/at91.h>
>
> / {
> ahb {
> diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
> index 382b044..0284845 100644
> --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
> +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
> @@ -9,7 +9,7 @@
>
> #include <dt-bindings/pinctrl/at91.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> -#include <dt-bindings/clk/at91.h>
> +#include <dt-bindings/clock/at91.h>
>
> / {
> aliases {
> diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
> index a9fa75e..7a8d4c6 100644
> --- a/arch/arm/boot/dts/sama5d3_uart.dtsi
> +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
> @@ -9,7 +9,7 @@
>
> #include <dt-bindings/pinctrl/at91.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> -#include <dt-bindings/clk/at91.h>
> +#include <dt-bindings/clock/at91.h>
>
> / {
> aliases {
> diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clock/at91.h
> similarity index 100%
> rename from include/dt-bindings/clk/at91.h
> rename to include/dt-bindings/clock/at91.h
>
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
