Hi Kamil, On Fri, Mar 7, 2014 at 6:18 PM, Kamil Debski <k.debski@xxxxxxxxxxx> wrote: > Hi Arun, > >> From: Arun Kumar K [mailto:arunkk.samsung@xxxxxxxxx] >> Sent: Friday, March 07, 2014 12:10 PM >> >> Hi Sylwester, >> >> On Fri, Mar 7, 2014 at 2:59 PM, Sylwester Nawrocki >> <s.nawrocki@xxxxxxxxxxx> wrote: >> > Hi, >> > >> > On 07/03/14 09:31, Arun Kumar K wrote: >> >> From: avnd kiran <avnd.kiran@xxxxxxxxxxx> >> >> >> >> Latest MFC v6 firmware requires tile mode and loop filter setting to >> >> be done as part of Init buffer command, in sync with v7. So, move >> >> these settings out of decode options reg. >> >> Also, make this register definition applicable from v6 onwards. >> >> >> >> Signed-off-by: avnd kiran <avnd.kiran@xxxxxxxxxxx> >> >> Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx> >> > >> > Will the driver also work with older version of the firmware after >> > this change ? If not, shouldn't things like this be done depending on >> > what firmware version is loaded ? >> > >> >> The original code was for the initial version of v6 firmware. >> After that the v6 firmware has got many fixes and updates which also >> got updated in the products running the same. >> As such there are no official multiple versions of v6 firmware, but >> only fixes / updates to older version. I will update the s5p-mfc-v6.fw >> in the linux-firmware also with the newer version. Hope that will be >> fine. > > Unfortunately, I share the same concerns as Sylwester. We have two problems: > 1) new kernel + old firmware > > In this case, someone will update the kernel and find out that video > decoding is not working. An assumption that I think is common, is that > updating the kernel should not break anything. If it was working with the > previous version it should work with the next. > > The solution I can suggest is that a check which firmware version is used > has to be implemented. Maybe you can use the date of firmware to do this > check? > Yes this concern is valid. I think its better to check for firmware date as the old firmware is already submitted in mainline. > 2) old kernel + new firmware > > I see no clear solution to this problem. If the kernel is old and the > firmware is behaving differently, the video decoding will not work. I can > guess that this case would be less common, but still a person can update the > firmware and leave the old kernel. Changing the firmware can be done by > replacing a single file. > > In addition to the above, you need to clearly specify in the > linux-firmware.git what is going on. A readme file is a must. Maybe a second > v6 firmware file should be included? > Yes I can put the newer version of v6 firmware also in linux-firmware with a readme detailing the difference between the same. I hope this is a valid solution. Regards Arun -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |