Hi Rahul,
On Thu, Mar 6, 2014 at 10:45 PM, Rahul Sharma <rahul.sharma@xxxxxxxxxxx> wrote:
> Add support for exynos5260 clocks in clock driver.
>
> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
Even though my signed-off-by is present in this patch I can't see my
email-id in cc list. Please check why?
[snip]
> +#include "clk-exynos5260.h"
> +#include "clk.h"
> +#include "clk-pll.h"
> +
> +#include <dt-bindings/clk/exynos5260-clk.h>
Better to move "exynos5260-clk.h" from "dt-bindings/clk" to "dt-bindings/clock"
as patch for moving all such headers already landed and looks good also.
[snip]
> +/*
> + * Applicable for all 2550 Type PLLS for Exynos5260, listed below
> + * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL,
> + * BUS_PLL, MEDIA_PLL, G3D_PLL.
> + */
> +static const struct samsung_pll_rate_table pll2550_24mhz_tbl[] = {
shouldn't we mark rate_table with __initconst?
[snip]
> + * Applicable for 2650 Type PLL for AUD_PLL.
> + */
> +static const struct samsung_pll_rate_table pll2650_24mhz_tbl[] = {
Ditto.
[snip]
> +#else
> +static void exynos5260_clk_sleep_init(void) {}
This will fail to compile if CONFIG_PM_SLEEP is not defined. Keep function
signature same.
> +#endif
> +
> +static struct samsung_clk_provider *
> +__init exynos5260_cmu_register_one(struct device_node *np,
> + struct exynos5260_cmu_info *cmu)
> +{
> + void __iomem *reg_base;
> + struct samsung_clk_provider *ctx;
> +
> + reg_base = of_iomap(np, 0);
> + if (!reg_base)
> + panic("%s: failed to map registers\n", __func__);
> +
> + ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
> + if (!ctx)
> + panic("%s: unable to alllocate ctx\n", __func__);
> +
> + if (cmu->pll_clks)
> + samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
> + reg_base);
> + if (cmu->mux_clks)
> + samsung_clk_register_mux(ctx, cmu->mux_clks,
> + cmu->nr_mux_clks);
> + if (cmu->div_clks)
> + samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
> + if (cmu->gate_clks)
> + samsung_clk_register_gate(ctx, cmu->gate_clks,
> + cmu->nr_gate_clks);
> + if (cmu->clk_regs)
> + exynos5260_clk_sleep_init(reg_base, cmu->clk_regs,
> + cmu->nr_clk_regs);
> +
> + return ctx;
As far as I can see only one user of this return "ctx" is only
"exynos5260_clk_top_init", other init functions just ignoring this
return value.
This can be avoided if we register "fin_pll" (as well as all phyclocks
as they are also fixed rate clocks) clock via DT.
As I have already done it for another ExynosXXX SoC and it worked for
me, on the same hand when today I tried this on Exynos5260, I can see
it's working well and I can register "fin_pll" as "fixed_clock" via DT
and kernel booted without any issues. Late registration of parent
clock does not causing any issues and CCF takes care of that.
If required I can send the changes internally or if you are OK I can
also upload next version of this patch with this fix, along with
addressing all other comments .
[snip]
> +struct samsung_fixed_rate_clock fixed_rate_ext_clks[] __initdata = {
> + FRATE(FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0),
> +};
In this version you removed other fixed clocks (phyclks and ioclks)
but I can not see corresponding DT patches where it has been moved.
Or am I missing anything here?
[snip]
> +static void __init exynos5260_clk_top_init(struct device_node *np)
> +{
> + struct exynos5260_cmu_info cmu;
> + struct samsung_clk_provider *ctx;
> +
> + memset(&cmu, 0, sizeof(cmu));
> +
> + cmu.pll_clks = top_pll_clks;
> + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks);
> + cmu.mux_clks = top_mux_clks;
> + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks);
> + cmu.div_clks = top_div_clks;
> + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks);
> + cmu.gate_clks = top_gate_clks;
> + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks);
> + cmu.nr_clk_ids = TOP_NR_CLK;
> + cmu.clk_regs = top_clk_regs;
> + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs);
> +
> + ctx = exynos5260_cmu_register_one(np, &cmu);
> +
> + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks,
> + ARRAY_SIZE(fixed_rate_ext_clks),
> + ext_clk_match);
> +}
> +
> +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top",
> + exynos5260_clk_top_init);
Well with this approach we end up adding 14 such
exynosxxx_clk_xxx_init functions all of which has similar lines of
code. As I know there are many upcoming Exynos SoC which will also
have similar multiple clock controllers (in some of them there are
upto 25 clock domains, and in that case we will end up writing 25 such
init functions) so I have following suggestion where we can have one
more structure which will hold all static data and match_table to
match compatibility string and return CMU_TYPE which can be mapped to
get proper clock_data which can be used in single clock_init function.
Following is some sample code which I have implemented and tested on
one of Exynos SoC. Please let me know your opinion about this.
=============================
static struct exynosxxxx_clock_data exynosxxxx_clk_data[] __initdata = {
{
.cmu_type = CMU_TYPE_TOP,
.mux_clocks = top_mux_clks,
.div_clocks = top_div_clks,
.pll_clocks = top_pll_clks,
.clk_regs = top_clk_regs,
.nr_mux_clocks = ARRAY_SIZE(top_mux_clks),
.nr_div_clocks = ARRAY_SIZE(top_div_clks),
.nr_pll_clocks = ARRAY_SIZE(top_pll_clks),
.nr_clk_regs = ARRAY_SIZE(top_clk_regs),
.nr_clks = TOP_NR_CLK,
}, {
.cmu_type = CMU_TYPE_EGL,
.mux_clocks = egl_mux_clks,
.div_clocks = egl_div_clks,
.pll_clocks = egl_pll_clks,
.clk_regs = egl_clk_regs,
.nr_mux_clocks = ARRAY_SIZE(egl_mux_clks),
.nr_div_clocks = ARRAY_SIZE(egl_div_clks),
.nr_pll_clocks = ARRAY_SIZE(egl_pll_clks),
.nr_clk_regs = ARRAY_SIZE(egl_clk_regs),
.nr_clks = EGL_NR_CLK,
}, {
/* Add similar elements here */
};
static struct of_device_id cmu_subtype_match_table[] = {
{
.compatible = "exynosxxxx-cmu-top",
.data = (void *)CMU_TYPE_TOP,
}, {
.compatible = "exynosxxx-cmu-peris",
.data = (void *)CMU_TYPE_PERIS,
}, {
/* Add similar elements here */
};
void __init exynosxxx_clk_init(struct device_node *np)
{
[snip]
match = of_match_node(cmu_subtype_match_table, np);
if (!match)
panic("%s: cmu type (%s) is not supported.\n", __func__,
np->name);
reg_base = of_iomap(np, 0);
if (!reg_base)
panic("%s: failed to map registers\n", __func__);
cmu_type = (unsigned long) match->data;
for (; i < CMU_TYPE_ALL; i++) {
clk_data = &exynosxxxx_clk_data[i];
if (cmu_type == clk_data->cmu_type)
break;
}
ctx = samsung_clk_init(np, reg_base, clk_data->nr_clks);
if (!ctx)
panic("%s: unable to alllocate ctx\n", __func__);
if (clk_data->nr_pll_clocks)
samsung_clk_register_pll(ctx, clk_data->pll_clocks,
clk_data->nr_pll_clocks,
reg_base);
if (clk_data->nr_mux_clocks)
samsung_clk_register_mux(ctx, clk_data->mux_clocks,
clk_data->nr_mux_clocks);
if (clk_data->nr_div_clocks)
samsung_clk_register_div(ctx, clk_data->div_clocks,
clk_data->nr_div_clocks);
if (clk_data->nr_gate_clocks)
samsung_clk_register_gate(ctx, clk_data->gate_clocks,
clk_data->nr_gate_clocks);
if (cmu->nr_clk_regs)
exynosxxx_clk_sleep_init(reg_base, cmu->clk_regs,
cmu->nr_clk_regs);
[snip]
}
CLK_OF_DECLARE(cmu_top, "exynosxxxx-cmu-top", exynosxxxx_clk_init);
CLK_OF_DECLARE(cmu_egl, "exynosxxxx-cmu-egl", exynosxxxx_clk_init);
/* add more clock domain entries here */
=======================================================
> diff --git a/drivers/clk/samsung/clk-exynos5260.h b/drivers/clk/samsung/clk-exynos5260.h
> new file mode 100644
> index 0000000..7c3717a
> --- /dev/null
> +++ b/drivers/clk/samsung/clk-exynos5260.h
> @@ -0,0 +1,448 @@
> +#ifndef __CLK_EXYNOS5260_H
> +#define __CLK_EXYNOS5260_H
> +
Thanks,
Pankaj Dubey
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
