Hi Kamil,
...
> +| 3. Supporting SoCs
> ++--------------------
> +
> +To support a new SoC a new file should be added to the drivers/phy
> +directory. Each SoC's configuration is stored in an instance of the
> +struct samsung_usb2_phy_config.
> +
> +struct samsung_usb2_phy_config {
> + const struct samsung_usb2_common_phy *phys;
> + unsigned int num_phys;
> + bool has_mode_switch;
You missed rate_to_clk here.
> +};
> +
...
> diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-
> usb2.c
> new file mode 100644
> index 0000000..c3b7719
> --- /dev/null
> +++ b/drivers/phy/phy-samsung-usb2.c
> @@ -0,0 +1,222 @@
> +/*
> + * Samsung SoC USB 1.1/2.0 PHY driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Kamil Debski <k.debski@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +#include "phy-samsung-usb2.h"
> +
> +static int samsung_usb2_phy_power_on(struct phy *phy)
> +{
> + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
> + struct samsung_usb2_phy_driver *drv = inst->drv;
> + int ret;
> +
> + dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n",
> + inst->cfg->label);
> + ret = clk_prepare_enable(drv->clk);
clk_prepare_enable() can sleep, and therefore doesn't allow
samusng_usb2_phy_power_on() to be used in atomic context
(e.g. inside spin_lock-ed area), what sometimes may be desirable.
What about to prepare clock in probe, and just enable it here
(note: clk_enable() doesn't sleep).
> + if (ret)
> + goto err_main_clk;
> + ret = clk_prepare_enable(drv->ref_clk);
> + if (ret)
> + goto err_instance_clk;
> + if (inst->cfg->power_on) {
> + spin_lock(&drv->lock);
> + ret = inst->cfg->power_on(inst);
> + spin_unlock(&drv->lock);
> + }
> +
> + return 0;
Thank you
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
