The patch replaces magic numbers with macros defined in DT header
in exynos5420 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Acked-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
Acked-by: Mike Turquette <mturquette@xxxxxxxxxx>
---
.../devicetree/bindings/clock/exynos5420-clock.txt | 184 +--------------------
arch/arm/boot/dts/exynos5420.dtsi | 95 +++++------
2 files changed, 55 insertions(+), 224 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
index 458f347..ca88c97 100644
--- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
@@ -13,184 +13,12 @@ Required Properties:
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- fin_pll 1
-
- [Clock Gate for Special Clocks]
-
- Clock ID
- ----------------------------
- sclk_uart0 128
- sclk_uart1 129
- sclk_uart2 130
- sclk_uart3 131
- sclk_mmc0 132
- sclk_mmc1 133
- sclk_mmc2 134
- sclk_spi0 135
- sclk_spi1 136
- sclk_spi2 137
- sclk_i2s1 138
- sclk_i2s2 139
- sclk_pcm1 140
- sclk_pcm2 141
- sclk_spdif 142
- sclk_hdmi 143
- sclk_pixel 144
- sclk_dp1 145
- sclk_mipi1 146
- sclk_fimd1 147
- sclk_maudio0 148
- sclk_maupcm0 149
- sclk_usbd300 150
- sclk_usbd301 151
- sclk_usbphy300 152
- sclk_usbphy301 153
- sclk_unipro 154
- sclk_pwm 155
- sclk_gscl_wa 156
- sclk_gscl_wb 157
- sclk_hdmiphy 158
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- aclk66_peric 256
- uart0 257
- uart1 258
- uart2 259
- uart3 260
- i2c0 261
- i2c1 262
- i2c2 263
- i2c3 264
- i2c4 265
- i2c5 266
- i2c6 267
- i2c7 268
- i2c_hdmi 269
- tsadc 270
- spi0 271
- spi1 272
- spi2 273
- keyif 274
- i2s1 275
- i2s2 276
- pcm1 277
- pcm2 278
- pwm 279
- spdif 280
- i2c8 281
- i2c9 282
- i2c10 283
- aclk66_psgen 300
- chipid 301
- sysreg 302
- tzpc0 303
- tzpc1 304
- tzpc2 305
- tzpc3 306
- tzpc4 307
- tzpc5 308
- tzpc6 309
- tzpc7 310
- tzpc8 311
- tzpc9 312
- hdmi_cec 313
- seckey 314
- mct 315
- wdt 316
- rtc 317
- tmu 318
- tmu_gpu 319
- pclk66_gpio 330
- aclk200_fsys2 350
- mmc0 351
- mmc1 352
- mmc2 353
- sromc 354
- ufs 355
- aclk200_fsys 360
- tsi 361
- pdma0 362
- pdma1 363
- rtic 364
- usbh20 365
- usbd300 366
- usbd301 377
- aclk400_mscl 380
- mscl0 381
- mscl1 382
- mscl2 383
- smmu_mscl0 384
- smmu_mscl1 385
- smmu_mscl2 386
- aclk333 400
- mfc 401
- smmu_mfcl 402
- smmu_mfcr 403
- aclk200_disp1 410
- dsim1 411
- dp1 412
- hdmi 413
- aclk300_disp1 420
- fimd1 421
- smmu_fimd1 422
- aclk166 430
- mixer 431
- aclk266 440
- rotator 441
- mdma1 442
- smmu_rotator 443
- smmu_mdma1 444
- aclk300_jpeg 450
- jpeg 451
- jpeg2 452
- smmu_jpeg 453
- aclk300_gscl 460
- smmu_gscl0 461
- smmu_gscl1 462
- gscl_wa 463
- gscl_wb 464
- gscl0 465
- gscl1 466
- clk_3aa 467
- aclk266_g2d 470
- sss 471
- slim_sss 472
- mdma0 473
- aclk333_g2d 480
- g2d 481
- aclk333_432_gscl 490
- smmu_3aa 491
- smmu_fimcl0 492
- smmu_fimcl1 493
- smmu_fimcl3 494
- fimc_lite3 495
- aclk_g3d 500
- g3d 501
- smmu_mixer 502
-
- Mux ID
- ----------------------------
-
- mout_hdmi 640
-
- Divider ID
- ----------------------------
-
- dout_pixel 768
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5420.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
@@ -208,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 259>, <&clock 130>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 45e2e65..e3329af 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos5420.h>
#include "exynos5.dtsi"
#include "exynos5420-pinctrl.dtsi"
@@ -119,7 +120,8 @@
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
- clocks = <&clock 1>, <&clock 5>, <&clock 148>, <&clock 149>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+ <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
@@ -127,7 +129,7 @@
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
- clocks = <&clock 401>;
+ clocks = <&clock CLK_MFC>;
clock-names = "mfc";
};
@@ -137,7 +139,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x2000>;
- clocks = <&clock 351>, <&clock 132>;
+ clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
@@ -149,7 +151,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x2000>;
- clocks = <&clock 352>, <&clock 133>;
+ clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
@@ -161,7 +163,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
- clocks = <&clock 353>, <&clock 134>;
+ clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
@@ -175,7 +177,7 @@
interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
<8>, <9>, <10>, <11>;
- clocks = <&clock 1>, <&clock 315>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
@@ -269,7 +271,7 @@
};
rtc@101E0000 {
- clocks = <&clock 317>;
+ clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
};
@@ -296,7 +298,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
- clocks = <&clock 362>;
+ clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -307,7 +309,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
- clocks = <&clock 363>;
+ clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -318,7 +320,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
- clocks = <&clock 473>;
+ clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -329,7 +331,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
- clocks = <&clock 442>;
+ clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -360,7 +362,7 @@
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
- clocks = <&clock 275>, <&clock 138>;
+ clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
@@ -373,7 +375,7 @@
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
- clocks = <&clock 276>, <&clock 139>;
+ clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
@@ -391,7 +393,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
- clocks = <&clock 271>, <&clock 135>;
+ clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -407,7 +409,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
- clocks = <&clock 272>, <&clock 136>;
+ clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -423,28 +425,28 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
- clocks = <&clock 273>, <&clock 137>;
+ clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
serial@12C00000 {
- clocks = <&clock 257>, <&clock 128>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
- clocks = <&clock 258>, <&clock 129>;
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
- clocks = <&clock 259>, <&clock 130>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
- clocks = <&clock 260>, <&clock 131>;
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -453,7 +455,7 @@
reg = <0x12dd0000 0x100>;
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
#pwm-cells = <3>;
- clocks = <&clock 279>;
+ clocks = <&clock CLK_PWM>;
clock-names = "timers";
};
@@ -464,7 +466,7 @@
};
dp-controller@145B0000 {
- clocks = <&clock 412>;
+ clocks = <&clock CLK_DP1>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
@@ -472,7 +474,7 @@
fimd@14400000 {
samsung,power-domain = <&disp_pd>;
- clocks = <&clock 147>, <&clock 421>;
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
@@ -480,7 +482,7 @@
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>, <0x10040720 0x4>;
interrupts = <0 106 0>;
- clocks = <&clock 270>;
+ clocks = <&clock CLK_TSADC>;
clock-names = "adc";
#io-channel-cells = <1>;
io-channel-ranges;
@@ -493,7 +495,7 @@
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 261>;
+ clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
@@ -506,7 +508,7 @@
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 262>;
+ clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
@@ -519,7 +521,7 @@
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 263>;
+ clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
@@ -532,7 +534,7 @@
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 264>;
+ clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
@@ -547,7 +549,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_hs_bus>;
- clocks = <&clock 265>;
+ clocks = <&clock CLK_I2C4>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -560,7 +562,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c5_hs_bus>;
- clocks = <&clock 266>;
+ clocks = <&clock CLK_I2C5>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -573,7 +575,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c6_hs_bus>;
- clocks = <&clock 267>;
+ clocks = <&clock CLK_I2C6>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -586,7 +588,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c7_hs_bus>;
- clocks = <&clock 268>;
+ clocks = <&clock CLK_I2C7>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -599,7 +601,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c8_hs_bus>;
- clocks = <&clock 281>;
+ clocks = <&clock CLK_I2C8>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -612,7 +614,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c9_hs_bus>;
- clocks = <&clock 282>;
+ clocks = <&clock CLK_I2C9>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -625,7 +627,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c10_hs_bus>;
- clocks = <&clock 283>;
+ clocks = <&clock CLK_I2C10>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -634,8 +636,9 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
- clocks = <&clock 413>, <&clock 143>, <&clock 768>,
- <&clock 158>, <&clock 640>;
+ clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+ <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+ <&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
status = "disabled";
@@ -645,7 +648,7 @@
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
- clocks = <&clock 431>, <&clock 143>;
+ clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
};
@@ -653,7 +656,7 @@
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
- clocks = <&clock 465>;
+ clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
samsung,power-domain = <&gsc_pd>;
};
@@ -662,7 +665,7 @@
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
- clocks = <&clock 466>;
+ clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
samsung,power-domain = <&gsc_pd>;
};
@@ -676,7 +679,7 @@
compatible = "samsung,exynos5420-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
- clocks = <&clock 318>;
+ clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
};
@@ -684,7 +687,7 @@
compatible = "samsung,exynos5420-tmu";
reg = <0x10064000 0x100>;
interrupts = <0 183 0>;
- clocks = <&clock 318>;
+ clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
};
@@ -692,7 +695,7 @@
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x10068000 0x100>, <0x1006c000 0x4>;
interrupts = <0 184 0>;
- clocks = <&clock 318>, <&clock 318>;
+ clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
@@ -700,7 +703,7 @@
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
interrupts = <0 185 0>;
- clocks = <&clock 318>, <&clock 319>;
+ clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
@@ -708,7 +711,7 @@
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x100a0000 0x100>, <0x10068000 0x4>;
interrupts = <0 215 0>;
- clocks = <&clock 319>, <&clock 318>;
+ clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
@@ -716,7 +719,7 @@
compatible = "samsung,exynos5420-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
- clocks = <&clock 316>;
+ clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
