Hi, This is second version of patchset adding support for S2MPS14 device to the Samsung MFD driver family. Changes since v1 ================ 1. Added Lee Jones' ACK-s. 2. Applied suggestions from review (Lee Jones). 3. Regulator: added __initconst to regulator_desc array (Yadwinder Singh Brar). This replaces the patch 7/15: "regulator: s2mps11: Choose number of supported regulators during probe" with: "regulator: s2mps11: Copy supported regulators from initconst" Description =========== The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two clocks instead of three and a little different registers layout. The patchset is organized in following way: 1. Patches from 1 to 7 clean up the S2MPS1X/S5M876X drivers and prepare for adding S2MPS14 support (some symbol renaming is needed). 2. Patches from 8 to 10 add support for S2MPS14 to the MFD and regulator drivers. They depend on previous patches. 3. Patches 11 and 12 add opmode support for S2MPS14 regulator driver. 4. Patches 13 and 14 add support for S2MPS14 RTC and they depend on previous MFD and RTC patches. Probably the best way to get everything working and merged into the linux-next would be to obtain ACK-s from all maintainers and to put all the patches into the mfd-next tree. The patchset is based on linux-next: next-20140211 *with* patch: mfd: sec-core: Fix possible NULL pointer dereference when i2c_new_dummy error TODO ==== Add support for S2MPS14 to the S2MPS11 clock driver. The patch is actually ready but it is based on the "Add support for clocks in S5M8767" http://thread.gmane.org/gmane.linux.kernel/1587881/focus=1587882 which didn't get their way into clk-next. I will wait for them. Krzysztof Kozlowski (15): mfd: sec: Add maximum RTC register for regmap config mfd: sec: Select different RTC regmaps for devices mfd/rtc: sec/sec: Rename SEC* symbols to S5M rtc: s5m: Remove undocumented time init on first boot mfd: sec: Use consistent S2MPS11 RTC alarm interrupt indexes regulator: s2mps11: Constify regulator_desc array regulator: s2mps11: Copy supported regulators from initconst mfd: sec: Add support for S2MPS14 regulator: s2mps11: Add support for S2MPS14 regulators Documentation: mfd: s2mps11: Document support for S2MPS14 regulator: s2mps11: Add opmode for S2MPS14 regulators Documentation: mfd/regulator: s2mps11: Document the "op_mode" bindings rtc: s5m: Support different register layout rtc: s5m: Add support for S2MPS14 RTC Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks Documentation/devicetree/bindings/mfd/s2mps11.txt | 82 +++- drivers/mfd/sec-core.c | 57 ++- drivers/mfd/sec-irq.c | 97 ++++- drivers/regulator/s2mps11.c | 421 +++++++++++++++++---- drivers/rtc/rtc-s5m.c | 284 +++++++++----- include/linux/mfd/samsung/core.h | 1 + include/linux/mfd/samsung/irq.h | 31 +- include/linux/mfd/samsung/rtc.h | 132 ++++--- include/linux/mfd/samsung/s2mps14.h | 171 +++++++++ 9 files changed, 1045 insertions(+), 231 deletions(-) create mode 100644 include/linux/mfd/samsung/s2mps14.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |