> Add support for S2MPS14 PMIC device to the MFD sec-core driver.
> The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
> clocks instead of three and a little different registers layout.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> ---
> drivers/mfd/sec-core.c | 48 +++++++++--
> drivers/mfd/sec-irq.c | 89 +++++++++++++++++++-
> include/linux/mfd/samsung/core.h | 1 +
> include/linux/mfd/samsung/irq.h | 27 +++++++
> include/linux/mfd/samsung/rtc.h | 56 +++++++++++--
> include/linux/mfd/samsung/s2mps14.h | 152 +++++++++++++++++++++++++++++++++++
> 6 files changed, 361 insertions(+), 12 deletions(-)
> create mode 100644 include/linux/mfd/samsung/s2mps14.h
>
> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
<snip>
> +static const struct mfd_cell s2mps14_devs[] = {
> + {
> + .name = "s2mps14-pmic",
> + }, {
> + .name = "s2mps14-rtc",
> + }, {
> + .name = "s2mps14-clk",
> + }
> +};
No device tree support for the children?
<Snip>
> +#define S2MPS14_LDO_VSEL_MASK 0x3F
> +#define S2MPS14_BUCK_VSEL_MASK 0xFF
> +#define S2MPS14_ENABLE_MASK (0x03 << S2MPS14_ENABLE_SHIFT)
> +#define S2MPS14_ENABLE_SHIFT 6
> +#define S2MPS14_LDO_N_VOLTAGES (S2MPS14_LDO_VSEL_MASK + 1)
> +#define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1)
Nit: Can you line these up using tabs please?
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
