Re: [PATCH 1/2] PM / OPP: Add support for 'boost' mode OPP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/04/2014 03:41 AM, Thomas Abraham wrote:
> From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> 
> Commit 6f19efc0 ("cpufreq: Add boost frequency support in core") adds
> support for CPU boost mode. This patch adds support for finding available
> boost OPPs from device tree and marking them as usable in boost mode.
> 
> Cc: Nishanth Menon <nm@xxxxxx>
> Cc: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> ---

Why is a cpufreq feature being pushed on to OPP library? you can very
well have a property boot-frequencies = < a b c > and be done with the
job.

I agree with Rob's comment that this is something we have to discuss
in wider "add features to an OPP" discussion[1].


[1] http://marc.info/?t=139108946400001&r=1&w=2

>  drivers/base/power/opp.c |   69 +++++++++++++++++++++++++++++++++++++---------
>  1 file changed, 56 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
> index 2553867..de4d52d 100644
> --- a/drivers/base/power/opp.c
> +++ b/drivers/base/power/opp.c
> @@ -62,6 +62,7 @@ struct dev_pm_opp {
>  	struct list_head node;
>  
>  	bool available;
> +	bool boost;
>  	unsigned long rate;
>  	unsigned long u_volt;
>  
> @@ -380,10 +381,12 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
>  EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
>  
>  /**
> - * dev_pm_opp_add()  - Add an OPP table from a table definitions
> + * dev_pm_opp_add_flags()  - Add an OPP to device OPP list with flags
>   * @dev:	device for which we do this operation
>   * @freq:	Frequency in Hz for this OPP
>   * @u_volt:	Voltage in uVolts for this OPP
> + * @available:	initial availability of the OPP with adding it to the list.
> + * @boost:	availability of this opp in controller's boost operating mode.
>   *
>   * This function adds an opp definition to the opp list and returns status.
>   * The opp is made available by default and it can be controlled using
> @@ -395,7 +398,8 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
>   * that this function is *NOT* called under RCU protection or in contexts where
>   * mutex cannot be locked.
>   */
> -int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
> +static int dev_pm_opp_add_flags(struct device *dev, unsigned long freq,
> +			unsigned long u_volt, bool available, bool boost)
>  {
>  	struct device_opp *dev_opp = NULL;
>  	struct dev_pm_opp *opp, *new_opp;
> @@ -441,7 +445,8 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
>  	new_opp->dev_opp = dev_opp;
>  	new_opp->rate = freq;
>  	new_opp->u_volt = u_volt;
> -	new_opp->available = true;
> +	new_opp->available = available;
> +	new_opp->boost = boost;
>  
>  	/* Insert new OPP in order of increasing frequency */
>  	head = &dev_opp->opp_list;
> @@ -462,6 +467,27 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
>  	srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_ADD, new_opp);
>  	return 0;
>  }
> +
> +/**
> + * dev_pm_opp_add()  - Add an OPP table from a table definitions
> + * @dev:	device for which we do this operation
> + * @freq:	Frequency in Hz for this OPP
> + * @u_volt:	Voltage in uVolts for this OPP
> + *
> + * This function adds an opp definition to the opp list and returns status.
> + * The opp is made available by default and it can be controlled using
> + * dev_pm_opp_enable/disable functions.
> + *
> + * Locking: The internal device_opp and opp structures are RCU protected.
> + * Hence this function internally uses RCU updater strategy with mutex locks
> + * to keep the integrity of the internal data structures. Callers should ensure
> + * that this function is *NOT* called under RCU protection or in contexts where
> + * mutex cannot be locked.
> + */
> +int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
> +{
> +	return dev_pm_opp_add_flags(dev, freq, u_volt, true, false);
> +}
>  EXPORT_SYMBOL_GPL(dev_pm_opp_add);
>  
>  /**
> @@ -651,7 +677,8 @@ int dev_pm_opp_init_cpufreq_table(struct device *dev,
>  
>  	list_for_each_entry(opp, &dev_opp->opp_list, node) {
>  		if (opp->available) {
> -			freq_table[i].driver_data = i;
> +			freq_table[i].driver_data =
> +				opp->boost ? CPUFREQ_BOOST_FREQ : i;
>  			freq_table[i].frequency = opp->rate / 1000;
>  			i++;
>  		}
> @@ -701,19 +728,14 @@ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev)
>  }
>  
>  #ifdef CONFIG_OF
> -/**
> - * of_init_opp_table() - Initialize opp table from device tree
> - * @dev:	device pointer used to lookup device OPPs.
> - *
> - * Register the initial OPP table with the OPP library for given device.
> - */
> -int of_init_opp_table(struct device *dev)
> +static int of_parse_opp_table(struct device *dev, const char *prop_name,
> +					bool boost)
>  {
>  	const struct property *prop;
>  	const __be32 *val;
>  	int nr;
>  
> -	prop = of_find_property(dev->of_node, "operating-points", NULL);
> +	prop = of_find_property(dev->of_node, prop_name, NULL);
>  	if (!prop)
>  		return -ENODEV;
>  	if (!prop->value)
> @@ -734,7 +756,7 @@ int of_init_opp_table(struct device *dev)
>  		unsigned long freq = be32_to_cpup(val++) * 1000;
>  		unsigned long volt = be32_to_cpup(val++);
>  
> -		if (dev_pm_opp_add(dev, freq, volt)) {
> +		if (dev_pm_opp_add_flags(dev, freq, volt, true, boost)) {
>  			dev_warn(dev, "%s: Failed to add OPP %ld\n",
>  				 __func__, freq);
>  			continue;
> @@ -744,5 +766,26 @@ int of_init_opp_table(struct device *dev)
>  
>  	return 0;
>  }
> +
> +/**
> + * of_init_opp_table() - Initialize opp table from device tree
> + * @dev:	device pointer used to lookup device OPPs.
> + *
> + * Register the initial OPP table with the OPP library for given device.
> + * Additional "boost" operating points of the controller, if any, are
> + * specified with "boost-opp" property.
> + */
> +int of_init_opp_table(struct device *dev)
> +{
> +	int ret;
> +
> +	ret = of_parse_opp_table(dev, "operating-points", false);
> +	if (!ret) {
> +		ret = of_parse_opp_table(dev, "boost-opp", true);
> +		if (ret == -ENODEV)
> +			ret = 0;
> +	}
> +	return ret;
> +}
>  EXPORT_SYMBOL_GPL(of_init_opp_table);
>  #endif
> 


-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux