Re: [PATCH v2 5/7] clk: exynos: use cpu-clock provider type to represent arm clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lukasz,

On Tue, Jan 21, 2014 at 4:08 PM, Lukasz Majewski <l.majewski@xxxxxxxxxxx> wrote:
> Hi Thomas,
>
>> On Mon, Jan 20, 2014 at 1:17 PM, Lukasz Majewski
>> <l.majewski@xxxxxxxxxxx> wrote:
>> > Hi Thomas,
>> >
>> >> From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
>> >>
>> >> With the addition of the new Samsung specific cpu-clock type, the
>> >> arm clock can be represented as a cpu-clock type and the
>> >> independent clock blocks that made up the arm clock can be removed.
>> >>
>> >> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
>> >> ---
>> >>  .../devicetree/bindings/clock/exynos5250-clock.txt |    1 +
>> >>  drivers/clk/samsung/clk-exynos4.c                  |   11
>> >> +++++------ drivers/clk/samsung/clk-exynos5250.c
>> >> |    8 ++++---- include/dt-bindings/clock/exynos5250.h
>> >> |    1 + 4 files changed, 11 insertions(+), 10 deletions(-)
>> >>
>> >> diff --git
>> >> a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
>> >> b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
>> >> index 99eae9c..acf867a 100644 ---
>> >> a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++
>> >> b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@
>> >> -38,6 +38,7 @@ clock which they consume.
>> >> ---------------------------- fin_pll            1
>> >> +  armclk             12
>> >>
>> >>    [Clock Gate for Special Clocks]
>> >>
>> >> diff --git a/drivers/clk/samsung/clk-exynos4.c
>> >> b/drivers/clk/samsung/clk-exynos4.c index 010f071..efcf4a3 100644
>> >> --- a/drivers/clk/samsung/clk-exynos4.c
>> >> +++ b/drivers/clk/samsung/clk-exynos4.c
>> >> @@ -437,8 +437,6 @@ static struct samsung_mux_clock
>> >> exynos4x12_mux_clks[] __initdata = {
>> >>  /* list of divider clocks supported in all exynos4 soc's */
>> >>  static struct samsung_div_clock exynos4_div_clks[] __initdata = {
>> >> -     DIV(0, "div_core", "mout_core", DIV_CPU0, 0, 3),
>> >> -     DIV(0, "div_core2", "div_core", DIV_CPU0, 28, 3),
>> >>       DIV(0, "div_fimc0", "mout_fimc0", DIV_CAM, 0, 4),
>> >>       DIV(0, "div_fimc1", "mout_fimc1", DIV_CAM, 4, 4),
>> >>       DIV(0, "div_fimc2", "mout_fimc2", DIV_CAM, 8, 4),
>> >> @@ -484,8 +482,8 @@ static struct samsung_div_clock
>> >> exynos4_div_clks[] __initdata = { DIV(0, "div_spi_pre2",
>> >> "div_spi2", DIV_PERIL2, 8, 8), DIV(0, "div_audio1", "mout_audio1",
>> >> DIV_PERIL4, 0, 4), DIV(0, "div_audio2", "mout_audio2", DIV_PERIL4,
>> >> 16, 4),
>> >> -     DIV(CLK_ARM_CLK, "arm_clk", "div_core2", DIV_CPU0, 28, 3),
>> >> -     DIV(CLK_SCLK_APLL, "sclk_apll", "mout_apll", DIV_CPU0, 24,
>> >> 3),
>> >> +     DIV_F(CLK_SCLK_APLL, "sclk_apll", "mout_apll", DIV_CPU0, 24,
>> >> 3,
>> >> +                     CLK_GET_RATE_NOCACHE, 0),
>> >>       DIV_F(0, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4,
>> >>                       CLK_SET_RATE_PARENT, 0),
>> >>       DIV_F(0, "div_mmc_pre0", "div_mmc0", DIV_FSYS1, 8, 8,
>> >> @@ -870,7 +868,6 @@ static struct samsung_gate_clock
>> >> exynos4x12_gate_clks[] __initdata = {
>> >>  static struct samsung_clock_alias exynos4_aliases[] __initdata = {
>> >>       ALIAS(CLK_MOUT_CORE, NULL, "moutcore"),
>> >> -     ALIAS(CLK_ARM_CLK, NULL, "armclk"),
>> >>       ALIAS(CLK_SCLK_APLL, NULL, "mout_apll"),
>> >>  };
>> >>
>> >> @@ -1125,12 +1122,14 @@ static void __init exynos4_clk_init(struct
>> >> device_node *np, samsung_clk_register_alias(exynos4_aliases,
>> >>                       ARRAY_SIZE(exynos4_aliases));
>> >>
>> >> +     samsung_register_arm_clock(np, CLK_ARM_CLK, "mout_apll",
>> >> reg_base); +
>> >
>> > I've got some doubts about allowing only the "mout_apll" clock to
>> > be the only parent for armclk Samsung clock.
>> >
>> > For the Exynos4412 it is also valid to have SCLK_MPLL_USER_C [*] as
>> > a parent for this clock.
>> >
>> > The problem is that you are reparenting the armclk to [*] with the
>> > register modification - no CCF involved.
>>
>> The MUX_CORE mux is part of the larger cpu clock type and not
>> registered as a separate mux clock with CCF. So I would like to know
>> if there are any potential issues you see if this mux clock is
>> internally managed within the set_rate of the larger cpu clock type.
>
> So the large opaque clock (armclk) starts with inputs to MUX_CORE (and
> embrace this MUX as well)?

Yes, the MUX_CORE is now part of the large opaque clock and will only
use mout_apll as the parent clock. The other parent will be used
temporarily only when the frequency of the mout_apll (leading to APLL)
has to be changed.

>
> If yes, then I don't mind if it is solely managed inside the armclk.
>
> This however allows the armclk to be fed from mout_apll[*] and
> sclk_mpll__user_c[**]. And this would be nice if reflected in the code.

Okay.

>
>>
>> >
>> > I just would like to know if this is yours design decision or
>> > something, that we have overlooked in the v1 of this patch series.
>>
>> I did overlook this one. This will be fixed in the next version by
>> ensuring that the dividers for SCLK_HPM clock will be updated only if
>> mout_apll is the parent of the MUX_HPM clock mux.
>
> Shall not they be updated if whatever connected to the MUX_HPM
> ([*] and [**]) changes?

They will be updated if their parent is mout_apll. If their parent is
a MPLL sourced clock, the divider will not be updated since the set
rate on this opaque clock will not change the frequency of the MPLL
sourced clock.

Thanks,
Thomas.

>
>>
>> Thanks,
>> Thomas.
>>
>> >
>> >>       pr_info("%s clocks: sclk_apll = %ld, sclk_mpll = %ld\n"
>> >>               "\tsclk_epll = %ld, sclk_vpll = %ld, arm_clk =
>> >> %ld\n", exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12",
>> >>               _get_rate("sclk_apll"),
>> >> _get_rate("sclk_mpll"), _get_rate("sclk_epll"),
>> >> _get_rate("sclk_vpll"),
>> >> -             _get_rate("arm_clk"));
>> >> +             _get_rate("armclk"));
>> >>  }
>> >>
>> >>
>> >> diff --git a/drivers/clk/samsung/clk-exynos5250.c
>> >> b/drivers/clk/samsung/clk-exynos5250.c index ff4beeb..487be36
>> >> 100644 --- a/drivers/clk/samsung/clk-exynos5250.c
>> >> +++ b/drivers/clk/samsung/clk-exynos5250.c
>> >> @@ -298,9 +298,8 @@ static struct samsung_div_clock
>> >> exynos5250_div_clks[] __initdata = { /*
>> >>        * CMU_CPU
>> >>        */
>> >> -     DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
>> >> -     DIV(0, "div_apll", "mout_apll", DIV_CPU0, 24, 3),
>> >> -     DIV_A(0, "div_arm2", "div_arm", DIV_CPU0, 28, 3, "armclk"),
>> >> +     DIV_F(0, "div_apll", "mout_apll", DIV_CPU0, 24, 3,
>> >> +                     CLK_GET_RATE_NOCACHE, 0),
>> >>
>> >>       /*
>> >>        * CMU_TOP
>> >> @@ -684,8 +683,9 @@ static void __init exynos5250_clk_init(struct
>> >> device_node *np) ARRAY_SIZE(exynos5250_div_clks));
>> >>       samsung_clk_register_gate(exynos5250_gate_clks,
>> >>                       ARRAY_SIZE(exynos5250_gate_clks));
>> >> +     samsung_register_arm_clock(np, CLK_ARM_CLK, "mout_apll",
>> >> reg_base);
>> >>       pr_info("Exynos5250: clock setup completed, armclk=%ld\n",
>> >> -                     _get_rate("div_arm2"));
>> >> +                     _get_rate("armclk"));
>> >>  }
>> >>  CLK_OF_DECLARE(exynos5250_clk, "samsung,exynos5250-clock",
>> >> exynos5250_clk_init); diff --git
>> >> a/include/dt-bindings/clock/exynos5250.h
>> >> b/include/dt-bindings/clock/exynos5250.h index 922f2dc..59a10fb
>> >> 100644 --- a/include/dt-bindings/clock/exynos5250.h +++
>> >> b/include/dt-bindings/clock/exynos5250.h @@ -21,6 +21,7 @@
>> >>  #define CLK_FOUT_CPLL                6
>> >>  #define CLK_FOUT_EPLL                7
>> >>  #define CLK_FOUT_VPLL                8
>> >> +#define CLK_ARM_CLK          12
>> >>
>> >>  /* gate for special clocks (sclk) */
>> >>  #define CLK_SCLK_CAM_BAYER   128
>> >
>> >
>> >
>> > --
>> > Best regards,
>> >
>> > Lukasz Majewski
>> >
>> > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
>
> --
> Best regards,
>
> Lukasz Majewski
>
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux