Re: [PATCH 3/6] clk: samsung: register cpu clock provider for exynos4210 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lukasz,

On Fri, Jan 10, 2014 at 5:34 PM, Lukasz Majewski <l.majewski@xxxxxxxxxxx> wrote:
> Hi Thomas,
>
>> Add a new clock provider for ARM clock domain. This clock provider
>> is composed of multiple components which include mux_core, div_core,
>> div_core2, div_corem0, div_corem1, div_periph, div_atb, div_pclk_dbg,
>> div_copy and div_hpm. This composition of mutiple components into
>> a single clock provider helps with faster completion of CPU clock
>> speed switching during DVFS operations.
>>
>> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
>> ---
>>  drivers/clk/samsung/clk-exynos4.c |   96
>> ++++++++++++++++++++++++++++++++++++- 1 files changed, 95
>> insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/clk/samsung/clk-exynos4.c
>> b/drivers/clk/samsung/clk-exynos4.c index d967571..4bf2f93 100644
>> --- a/drivers/clk/samsung/clk-exynos4.c
>> +++ b/drivers/clk/samsung/clk-exynos4.c
>> @@ -108,8 +108,11 @@
>>  #define APLL_CON0            0x14100
>>  #define E4210_MPLL_CON0              0x14108
>>  #define SRC_CPU                      0x14200
>> +#define STAT_CPU             0x14400
>>  #define DIV_CPU0             0x14500
>>  #define DIV_CPU1             0x14504
>> +#define DIV_STAT_CPU0                0x14600
>> +#define DIV_STAT_CPU1                0x14604
>>  #define GATE_SCLK_CPU                0x14800
>>  #define GATE_IP_CPU          0x14900
>>  #define E4X12_DIV_ISP0               0x18300
>> @@ -289,7 +292,7 @@ static unsigned long exynos4_clk_regs[]
>> __initdata = { };
>>
>>  /* list of all parent clock list */
>> -PNAME(mout_apll_p)   = { "fin_pll", "fout_apll", };
>> +PNAME(mout_apll_p)   = { "fin_pll", "fout_apll1", };
>>  PNAME(mout_mpll_p)   = { "fin_pll", "fout_mpll", };
>>  PNAME(mout_epll_p)   = { "fin_pll", "fout_epll", };
>>  PNAME(mout_vpllsrc_p)        = { "fin_pll", "sclk_hdmi24m", };
>> @@ -306,6 +309,7 @@ PNAME(mout_onenand_p)  = {"aclk133", "aclk160", };
>>  PNAME(mout_onenand1_p) = {"mout_onenand", "sclk_vpll", };
>>
>>  /* Exynos 4210-specific parent groups */
>> +PNAME(armclk_p) = { "fout_apll", };
>
> Here you only give no parent clock, but at samsung_coreclk_register()
> it is expected to provide list of parents.

Here only one parent is listed, but the core clock type does not limit
the number of parents that can be specified. A specific implementation
can define and use multiple parents.

>
>>  PNAME(sclk_vpll_p4210)       = { "mout_vpllsrc", "fout_vpll", };
>>  PNAME(mout_core_p4210)       = { "mout_apll", "sclk_mpll", };
>>  PNAME(sclk_ampll_p4210)      = { "sclk_mpll", "sclk_apll", };
>> @@ -1089,6 +1093,92 @@ static struct samsung_pll_clock
>> exynos4x12_plls[nr_plls] __initdata = { VPLL_LOCK, VPLL_CON0, NULL),
>>  };
>>
>> +#define EXYNOS4210_DIV_CPU0(apll, pclk_dbg, atb, periph, corem1,
>> corem0) \
>> +             ((apll << 24) | (pclk_dbg << 20) | (atb << 16) | \
>> +             (periph << 12) | (corem1 << 8) | (corem0 << 4))
>> +#define EXYNOS4210_DIV_CPU1(hpm, copy)       \
>> +             ((hpm << 4) | (copy << 0))
>> +static const unsigned long exynos4210_armclk_data[][2] = {
>> +     { EXYNOS4210_DIV_CPU0(7, 1, 4, 3, 7, 3),
>> EXYNOS4210_DIV_CPU1(0, 5), },
>> +     { EXYNOS4210_DIV_CPU0(7, 1, 4, 3, 7, 3),
>> EXYNOS4210_DIV_CPU1(0, 4), },
>> +     { EXYNOS4210_DIV_CPU0(7, 1, 3, 3, 7, 3),
>> EXYNOS4210_DIV_CPU1(0, 3), },
>> +     { EXYNOS4210_DIV_CPU0(7, 1, 3, 3, 7, 3),
>> EXYNOS4210_DIV_CPU1(0, 3), },
>> +     { EXYNOS4210_DIV_CPU0(7, 1, 3, 3, 7, 3),
>> EXYNOS4210_DIV_CPU1(0, 3), },
>> +     { EXYNOS4210_DIV_CPU0(0, 1, 3, 1, 3, 1),
>> EXYNOS4210_DIV_CPU1(0, 3), }, +};
>> +
>
> What do you think about adding those parameters (like CPU dividers) as
> an attribute to /cpus/cpu@0 node?

Not in CPU node but may be in clock controller node since these values
are actually used by the clock controller. But since these values are
Exynos4210 specific and not generic enough to be reused across
multiple Exynos SoCs, there is little benefit in defining bindings and
parsing code for these values. It would be simpler enough to just
embed them in the code.

>
>> +static const unsigned long exynos4210_armclk_freqs[] = {
>> +     1200000 , 1000000, 800000, 500000, 400000, 200000,
>> +};
>
> Those freq's are going to be defined at /cpus/cpu@0 at operating-points
> attribute (or if possible took from cpufreq_frequency table).

These are frequencies supported by the core clock. But the cpufreq
table can use all or subset of the supported frequencies. The core
clock should be usable with the clock api independently and not tied
to be used only by cpufreq driver.

>
>> +
>> +static const struct samsung_core_clock_freq_table
>> exyno4210_armclk_table = {
>> +     .freq           = exynos4210_armclk_freqs,
>> +     .freq_count     = ARRAY_SIZE(exynos4210_armclk_freqs),
>> +     .data           = (void *)exynos4210_armclk_data,
>> +};
>> +
>> +static int exynos4210_armclk_set_rate(struct clk_hw *hw, unsigned
>> long drate,
>> +                                     unsigned long prate)
>> +{
>> +     struct samsung_core_clock *armclk;
>> +     const struct samsung_core_clock_freq_table *freq_tbl;
>> +     unsigned long *freq_data;
>> +     unsigned long mux_reg, idx;
>> +     void __iomem *base;
>> +
>> +     if (drate == prate)
>> +             return 0;
>> +
>> +     armclk = container_of(hw, struct samsung_core_clock, hw);
>> +     freq_tbl = armclk->freq_table;
>> +     freq_data = (unsigned long *)freq_tbl->data;
>> +     base = armclk->ctrl_base;
>> +
>> +     for (idx = 0; idx < freq_tbl->freq_count; idx++, freq_data
>> += 2)
>> +             if ((freq_tbl->freq[idx] * 1000) == drate)
>> +                     break;
>> +
>> +     if (!armclk->fout_pll)
>> +             armclk->fout_pll = __clk_lookup("fout_apll");\
>                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^[*]
>
> I'm a bit confused here for two reasons. Please correct me if I'm wrong.
>
> 1. You go into this ->set_rate() because of calling clk_set_rate at
> "arm_clk" clock (numbered as 12 at clk-exynos4.c) at cpufreq-cpu0.c
>
> In a Exynos4210 we have:
> XXTI-> APLL -> fout_apll -> mout_apll -> mout_core -> div_core
> -> div_core2 -> arm_clk
>
> In the code you call directly the fout_apll which changes
> frequency. Then the change shall be propagated to all registered
> clocks.
> I think, that DIV and DIV1 shall be reduced before PLL change [*],
> to reflect the changes at CCF.

The core clock implementation encapsulates multiple clock blocks (such
as dividers and muxes) which are in between the output of the APLL and
the point that actually is the cpu domain clock output. When a clock
frequency change has to be made, all these clock blocks encapsulated
within the core clock are programmed by pre-determined values. This
approach allows very fast clock speed switching, instead of traversing
the entire CCF clock tree searching for individual clock blocks to be
programmed.

>
>
>> +
>> +     if (drate < prate) {
>> +             mux_reg = readl(base + SRC_CPU);
>> +             writel(mux_reg | (1 << 16), base + SRC_CPU);
>> +             while (((readl(base + STAT_CPU) >> 16) & 0x7) != 2)
>> +                     ;
>                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [**]
>
> 2. I think, the above shall be done in a following way:
>
>         clk_set_parent(mout_core, mout_mpll);
>         clk_set_rate(armclk->fout_pll, drate);
>         clk_set_parent(mout_core, mout_apll);
>
> The direct write to registers [**] doesn't look compliant to CCF.
>

As mentioned above, the clock block encapsulates these clock blocks
into a single clock and only this single encapsulated clock is
registered with CCF. The internal implementation of how the different
clock blocks are managed within this clock is independent of the CCF.

>
> I'd rather thought about using "mout_core" instead of "arm_clk". Then we
> would get access to the parent directly:
>
>         struct clk *parent = clk_get_parent(hw->clk);
>
> so we set the parents explicitly (at clk registration) and call
> ->recalc_rate for clocks which are lower in the tree (like "div_core",
> "div_core2").

That was not the intention as mentioned above.

Thanks,
Thomas.

>
>> +             clk_set_rate(armclk->fout_pll, drate);
>> +     }
>> +
>> +     writel(freq_data[0], base + DIV_CPU0);
>> +     while (readl(base + DIV_STAT_CPU0) != 0)
>> +             ;
>> +     writel(freq_data[1], base + DIV_CPU1);
>> +     while (readl(base + DIV_STAT_CPU1) != 0)
>> +             ;
>> +
>> +     if (drate > prate) {
>> +             mux_reg = readl(base + SRC_CPU);
>> +             writel(mux_reg | (1 << 16), base + SRC_CPU);
>> +             while (((readl(base + STAT_CPU) >> 16) & 0x7) != 2)
>> +                     ;
>> +
>> +             clk_set_rate(armclk->fout_pll, drate);
>> +     }
>> +
>> +     mux_reg = readl(base + SRC_CPU);
>> +     writel(mux_reg & ~(1 << 16), base + SRC_CPU);
>> +     while (((readl(base + STAT_CPU) >> 16) & 0x7) != 1)
>> +                     ;
>> +     return 0;
>> +}
>> +
>> +static const struct clk_ops exynos4210_armclk_clk_ops = {
>> +     .recalc_rate = samsung_core_clock_recalc_rate,
>> +     .round_rate = samsung_core_clk_round_rate,
>> +     .set_rate = exynos4210_armclk_set_rate,
>> +};
>> +
>>  /* register exynos4 clocks */
>>  static void __init exynos4_clk_init(struct device_node *np,
>>                                   enum exynos4_soc exynos4_soc,
>> @@ -1164,6 +1254,10 @@ static void __init exynos4_clk_init(struct
>> device_node *np, ARRAY_SIZE(exynos4210_gate_clks));
>>               samsung_clk_register_alias(exynos4210_aliases,
>>                       ARRAY_SIZE(exynos4210_aliases));
>> +             samsung_coreclk_register("armclk", armclk_p,
>> +                     ARRAY_SIZE(armclk_p), "fout_apll",
>> +                     &exynos4210_armclk_clk_ops, arm_clk,
>> +                     &exyno4210_armclk_table);
>>       } else {
>>               samsung_clk_register_mux(exynos4x12_mux_clks,
>>                       ARRAY_SIZE(exynos4x12_mux_clks));
>
>
>
> --
> Best regards,
>
> Lukasz Majewski
>
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux