[PATCH RESEND v2 05/12] ARM: dts: exynos5250: convert magic numbers to macros in clock bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch replaces magic numbers with macros defined in DT header
in exynos5250 clock bindings.

Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
 .../devicetree/bindings/clock/exynos5250-clock.txt | 162 +--------------------
 arch/arm/boot/dts/exynos5250.dtsi                  | 100 ++++++-------
 2 files changed, 57 insertions(+), 205 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
index 5883ec8..9cbb688 100644
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -13,162 +13,12 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
-       [Core Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  fin_pll		1
-
-  [Clock Gate for Special Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  sclk_cam_bayer	128
-  sclk_cam0		129
-  sclk_cam1		130
-  sclk_gscl_wa		131
-  sclk_gscl_wb		132
-  sclk_fimd1		133
-  sclk_mipi1		134
-  sclk_dp		135
-  sclk_hdmi		136
-  sclk_pixel		137
-  sclk_audio0		138
-  sclk_mmc0		139
-  sclk_mmc1		140
-  sclk_mmc2		141
-  sclk_mmc3		142
-  sclk_sata		143
-  sclk_usb3		144
-  sclk_jpeg		145
-  sclk_uart0		146
-  sclk_uart1		147
-  sclk_uart2		148
-  sclk_uart3		149
-  sclk_pwm		150
-  sclk_audio1		151
-  sclk_audio2		152
-  sclk_spdif		153
-  sclk_spi0		154
-  sclk_spi1		155
-  sclk_spi2		156
-  div_i2s1		157
-  div_i2s2		158
-  sclk_hdmiphy		159
-
-
-   [Peripheral Clock Gates]
-
-  Clock			ID
-  ----------------------------
-
-  gscl0			256
-  gscl1			257
-  gscl2			258
-  gscl3			259
-  gscl_wa		260
-  gscl_wb		261
-  smmu_gscl0		262
-  smmu_gscl1		263
-  smmu_gscl2		264
-  smmu_gscl3		265
-  mfc			266
-  smmu_mfcl		267
-  smmu_mfcr		268
-  rotator		269
-  jpeg			270
-  mdma1			271
-  smmu_rotator		272
-  smmu_jpeg		273
-  smmu_mdma1		274
-  pdma0			275
-  pdma1			276
-  sata			277
-  usbotg		278
-  mipi_hsi		279
-  sdmmc0		280
-  sdmmc1		281
-  sdmmc2		282
-  sdmmc3		283
-  sromc			284
-  usb2			285
-  usb3			286
-  sata_phyctrl		287
-  sata_phyi2c		288
-  uart0			289
-  uart1			290
-  uart2			291
-  uart3			292
-  uart4			293
-  i2c0			294
-  i2c1			295
-  i2c2			296
-  i2c3			297
-  i2c4			298
-  i2c5			299
-  i2c6			300
-  i2c7			301
-  i2c_hdmi		302
-  adc			303
-  spi0			304
-  spi1			305
-  spi2			306
-  i2s1			307
-  i2s2			308
-  pcm1			309
-  pcm2			310
-  pwm			311
-  spdif			312
-  ac97			313
-  hsi2c0		314
-  hsi2c1		315
-  hs12c2		316
-  hs12c3		317
-  chipid		318
-  sysreg		319
-  pmu			320
-  cmu_top		321
-  cmu_core		322
-  cmu_mem		323
-  tzpc0			324
-  tzpc1			325
-  tzpc2			326
-  tzpc3			327
-  tzpc4			328
-  tzpc5			329
-  tzpc6			330
-  tzpc7			331
-  tzpc8			332
-  tzpc9			333
-  hdmi_cec		334
-  mct			335
-  wdt			336
-  rtc			337
-  tmu			338
-  fimd1			339
-  mie1			340
-  dsim0			341
-  dp			342
-  mixer			343
-  hdmi			344
-  g2d			345
-  mdma0			346
-  smmu_mdma0		347
-
-
-   [Clock Muxes]
-
-  Clock			ID
-  ----------------------------
-  mout_hdmi		1024
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
 
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5250.h header and can be used in device
+tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
@@ -186,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
-		clocks = <&clock 314>, <&clock 153>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 177becd..d3e62b4 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -17,6 +17,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/clock/exynos5250.h>
 #include "exynos5.dtsi"
 #include "exynos5250-pinctrl.dtsi"
 
@@ -111,7 +112,7 @@
 		interrupt-parent = <&mct_map>;
 		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
 			     <4 0>, <5 0>;
-		clocks = <&clock 1>, <&clock 335>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
@@ -164,7 +165,7 @@
 	};
 
 	watchdog {
-		clocks = <&clock 336>;
+		clocks = <&clock CLK_WDT>;
 		clock-names = "watchdog";
 	};
 
@@ -172,7 +173,7 @@
 		compatible = "samsung,exynos5250-g2d";
 		reg = <0x10850000 0x1000>;
 		interrupts = <0 91 0>;
-		clocks = <&clock 345>;
+		clocks = <&clock CLK_G2D>;
 		clock-names = "fimg2d";
 	};
 
@@ -181,12 +182,12 @@
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
 		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock 266>;
+		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 	};
 
 	rtc@101E0000 {
-		clocks = <&clock 337>;
+		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "okay";
 	};
@@ -195,27 +196,27 @@
 		compatible = "samsung,exynos5250-tmu";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 65 0>;
-		clocks = <&clock 338>;
+		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
 	};
 
 	serial@12C00000 {
-		clocks = <&clock 289>, <&clock 146>;
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C10000 {
-		clocks = <&clock 290>, <&clock 147>;
+		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C20000 {
-		clocks = <&clock 291>, <&clock 148>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C30000 {
-		clocks = <&clock 292>, <&clock 149>;
+		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
@@ -223,7 +224,7 @@
 		compatible = "samsung,exynos5-sata-ahci";
 		reg = <0x122F0000 0x1ff>;
 		interrupts = <0 115 0>;
-		clocks = <&clock 277>, <&clock 143>;
+		clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
 		clock-names = "sata", "sclk_sata";
 	};
 
@@ -238,7 +239,7 @@
 		interrupts = <0 56 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 294>;
+		clocks = <&clock CLK_I2C0>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c0_bus>;
@@ -250,7 +251,7 @@
 		interrupts = <0 57 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 295>;
+		clocks = <&clock CLK_I2C1>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_bus>;
@@ -262,7 +263,7 @@
 		interrupts = <0 58 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 296>;
+		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c2_bus>;
@@ -274,7 +275,7 @@
 		interrupts = <0 59 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 297>;
+		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c3_bus>;
@@ -286,7 +287,7 @@
 		interrupts = <0 60 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 298>;
+		clocks = <&clock CLK_I2C4>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_bus>;
@@ -298,7 +299,7 @@
 		interrupts = <0 61 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 299>;
+		clocks = <&clock CLK_I2C5>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_bus>;
@@ -310,7 +311,7 @@
 		interrupts = <0 62 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 300>;
+		clocks = <&clock CLK_I2C6>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_bus>;
@@ -322,7 +323,7 @@
 		interrupts = <0 63 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 301>;
+		clocks = <&clock CLK_I2C7>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_bus>;
@@ -334,7 +335,7 @@
 		interrupts = <0 64 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 302>;
+		clocks = <&clock CLK_I2C_HDMI>;
 		clock-names = "i2c";
 	};
 
@@ -343,7 +344,7 @@
                 reg = <0x121D0000 0x100>;
                 #address-cells = <1>;
                 #size-cells = <0>;
-		clocks = <&clock 288>;
+		clocks = <&clock CLK_SATA_PHYI2C>;
 		clock-names = "i2c";
 	};
 
@@ -356,7 +357,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 304>, <&clock 154>;
+		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_bus>;
@@ -371,7 +372,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 305>, <&clock 155>;
+		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
@@ -386,7 +387,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 306>, <&clock 156>;
+		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_bus>;
@@ -394,19 +395,19 @@
 
 	dwmmc_0: dwmmc0@12200000 {
 		reg = <0x12200000 0x1000>;
-		clocks = <&clock 280>, <&clock 139>;
+		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
 		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_1: dwmmc1@12210000 {
 		reg = <0x12210000 0x1000>;
-		clocks = <&clock 281>, <&clock 140>;
+		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
 		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_2: dwmmc2@12220000 {
 		reg = <0x12220000 0x1000>;
-		clocks = <&clock 282>, <&clock 141>;
+		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
 		clock-names = "biu", "ciu";
 	};
 
@@ -416,7 +417,7 @@
 		interrupts = <0 78 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 283>, <&clock 142>;
+		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
 		clock-names = "biu", "ciu";
 	};
 
@@ -444,7 +445,7 @@
 		dmas = <&pdma1 12
 			&pdma1 11>;
 		dma-names = "tx", "rx";
-		clocks = <&clock 307>, <&clock 157>;
+		clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
 		clock-names = "iis", "i2s_opclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_bus>;
@@ -457,7 +458,7 @@
 		dmas = <&pdma0 12
 			&pdma0 11>;
 		dma-names = "tx", "rx";
-		clocks = <&clock 308>, <&clock 158>;
+		clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
 		clock-names = "iis", "i2s_opclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2_bus>;
@@ -465,7 +466,7 @@
 
 	usb@12000000 {
 		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock 286>;
+		clocks = <&clock CLK_USB3>;
 		clock-names = "usbdrd30";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -482,7 +483,7 @@
 	usb3_phy: usbphy@12100000 {
 		compatible = "samsung,exynos5250-usb3phy";
 		reg = <0x12100000 0x100>;
-		clocks = <&clock 1>, <&clock 286>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>;
 		clock-names = "ext_xtal", "usbdrd30";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -498,7 +499,7 @@
 		reg = <0x12110000 0x100>;
 		interrupts = <0 71 0>;
 
-		clocks = <&clock 285>;
+		clocks = <&clock CLK_USB2>;
 		clock-names = "usbhost";
 	};
 
@@ -507,14 +508,14 @@
 		reg = <0x12120000 0x100>;
 		interrupts = <0 71 0>;
 
-		clocks = <&clock 285>;
+		clocks = <&clock CLK_USB2>;
 		clock-names = "usbhost";
 	};
 
 	usb2_phy: usbphy@12130000 {
 		compatible = "samsung,exynos5250-usb2phy";
 		reg = <0x12130000 0x100>;
-		clocks = <&clock 1>, <&clock 285>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>;
 		clock-names = "ext_xtal", "usbhost";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -537,7 +538,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <0 34 0>;
-			clocks = <&clock 275>;
+			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -548,7 +549,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <0 35 0>;
-			clocks = <&clock 276>;
+			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -559,7 +560,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
-			clocks = <&clock 346>;
+			clocks = <&clock CLK_MDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -570,7 +571,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
-			clocks = <&clock 271>;
+			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -583,7 +584,7 @@
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
 		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock 256>;
+		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 	};
 
@@ -592,7 +593,7 @@
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
 		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock 257>;
+		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
 	};
 
@@ -601,7 +602,7 @@
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
 		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock 258>;
+		clocks = <&clock CLK_GSCL2>;
 		clock-names = "gscl";
 	};
 
@@ -610,7 +611,7 @@
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
 		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock 259>;
+		clocks = <&clock CLK_GSCL3>;
 		clock-names = "gscl";
 	};
 
@@ -618,8 +619,9 @@
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
-		clocks = <&clock 344>, <&clock 136>, <&clock 137>,
-				<&clock 159>, <&clock 1024>;
+		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+			 <&clock CLK_MOUT_HDMI>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
 				"sclk_hdmiphy", "mout_hdmi";
 	};
@@ -628,7 +630,7 @@
 		compatible = "samsung,exynos5250-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
-		clocks = <&clock 343>, <&clock 136>;
+		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
 		clock-names = "mixer", "sclk_hdmi";
 	};
 
@@ -639,14 +641,14 @@
 	};
 
 	dp-controller@145B0000 {
-		clocks = <&clock 342>;
+		clocks = <&clock CLK_DP>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
 	};
 
 	fimd@14400000 {
-		clocks = <&clock 133>, <&clock 339>;
+		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
 	};
 
@@ -654,7 +656,7 @@
 		compatible = "samsung,exynos-adc-v1";
 		reg = <0x12D10000 0x100>, <0x10040718 0x4>;
 		interrupts = <0 106 0>;
-		clocks = <&clock 303>;
+		clocks = <&clock CLK_ADC>;
 		clock-names = "adc";
 		#io-channel-cells = <1>;
 		io-channel-ranges;
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux