DT nodes contain clock numbers which are referred by drivers
to get the clocks. These numbers are replaced by MACROs
which are defined in the exynos5420-clk.h header file.
Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5420.dtsi | 47 +++++++++++++++++++------------------
1 file changed, 24 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index e552608..db8b2da 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -17,6 +17,7 @@
#include "exynos5420-pinctrl.dtsi"
#include <dt-bindings/clk/exynos-audss-clk.h>
+#include <dt-bindings/clk/exynos5420-clk.h>
/ {
compatible = "samsung,exynos5420";
@@ -62,7 +63,7 @@
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
- clocks = <&clock 148>;
+ clocks = <&clock SCLK_MAUDIO0>;
clock-names = "sclk_audio";
};
@@ -70,7 +71,7 @@
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
- clocks = <&clock 401>;
+ clocks = <&clock ACLK_MFC>;
clock-names = "mfc";
};
@@ -80,7 +81,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x2000>;
- clocks = <&clock 351>, <&clock 132>;
+ clocks = <&clock ACLK_MMC0>, <&clock SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
@@ -92,7 +93,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x2000>;
- clocks = <&clock 352>, <&clock 133>;
+ clocks = <&clock ACLK_MMC1>, <&clock SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
@@ -104,7 +105,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
- clocks = <&clock 353>, <&clock 134>;
+ clocks = <&clock ACLK_MMC2>, <&clock SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
@@ -118,7 +119,7 @@
interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
<8>, <9>, <10>, <11>;
- clocks = <&clock 1>, <&clock 315>;
+ clocks = <&clock FIN_PLL>, <&clock PCLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
@@ -207,28 +208,28 @@
};
rtc@101E0000 {
- clocks = <&clock 317>;
+ clocks = <&clock PCLK_RTC>;
clock-names = "rtc";
status = "okay";
};
serial@12C00000 {
- clocks = <&clock 257>, <&clock 128>;
+ clocks = <&clock PCLK_UART0>, <&clock SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
- clocks = <&clock 258>, <&clock 129>;
+ clocks = <&clock PCLK_UART1>, <&clock SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
- clocks = <&clock 259>, <&clock 130>;
+ clocks = <&clock PCLK_UART2>, <&clock SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
- clocks = <&clock 260>, <&clock 131>;
+ clocks = <&clock PCLK_UART3>, <&clock SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -239,14 +240,14 @@
};
dp-controller@145B0000 {
- clocks = <&clock 412>;
+ clocks = <&clock PCLK_DP1>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
fimd@14400000 {
- clocks = <&clock 147>, <&clock 421>;
+ clocks = <&clock SCLK_FIMD1>, <&clock ACLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
@@ -254,7 +255,7 @@
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>, <0x10040720 0x4>;
interrupts = <0 106 0>;
- clocks = <&clock 270>;
+ clocks = <&clock PCLK_TSADC>;
clock-names = "adc";
#io-channel-cells = <1>;
io-channel-ranges;
@@ -267,7 +268,7 @@
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 261>;
+ clocks = <&clock PCLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
@@ -280,7 +281,7 @@
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 262>;
+ clocks = <&clock PCLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
@@ -293,7 +294,7 @@
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 263>;
+ clocks = <&clock PCLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
@@ -306,7 +307,7 @@
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 264>;
+ clocks = <&clock PCLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
@@ -317,8 +318,8 @@
compatible = "samsung,exynos5420-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
- clocks = <&clock 413>, <&clock 143>, <&clock 768>,
- <&clock 158>, <&clock 640>;
+ clocks = <&clock PCLK_HDMI>, <&clock SCLK_HDMI>, <&clock DOUT_PIXEL>,
+ <&clock SCLK_HDMIPHY>, <&clock MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
status = "disabled";
@@ -340,7 +341,7 @@
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
- clocks = <&clock 431>, <&clock 143>;
+ clocks = <&clock ACLK_MIXER>, <&clock SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
};
@@ -348,7 +349,7 @@
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
- clocks = <&clock 465>;
+ clocks = <&clock ACLK_GSCL0>;
clock-names = "gscl";
samsung,power-domain = <&gsc_pd>;
};
@@ -357,7 +358,7 @@
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
- clocks = <&clock 466>;
+ clocks = <&clock ACLK_GSCL1>;
clock-names = "gscl";
samsung,power-domain = <&gsc_pd>;
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
