Re: [PATCH V12 0/3] Add watchdog DT nodes and use syscon regmap interface to configure pmu registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Wim Van Sebroeck,

Can you kindly look into this series and take necessary action..?

Best Wishes,
Leela Krishna.


On Fri, Dec 6, 2013 at 2:47 PM, Leela Krishna Amudala
<l.krishna@xxxxxxxxxxx> wrote:
> This patchset does the following things
>         - Adds pmusysreg device node to exynos5.dtsi file
>         - Adds watchdog DT nodes to Exynos5250 and 5420
>         - Uses syscon regmap interface to configure pmu registers
>           to mask/unmask enable/disable of watchdog.
>
> This patch set is rebased on Kgene's for-next branch and tested on SMDK5420
>
> changes since V11:
>         - Added EXYNOS5 prefix to REG_OFFSET defines (suggested by Tomasz)
>         - NEEDS_PMU_CONFIG => HAS_PMU_CONFIG (suggested by Olof, Guenter)
>         - Move QUIRK_HAS_PMU_CONFIG check to s3c2410wdt_mask_and_disable_reset (suggested by Guenter)
>
> changes since V10:
>         - followed coding style rules
>         - removed duplicate error message suggested by Guenter Roeck <linux@xxxxxxxxxxxx>
>
> changes since V9:
>         - added descriptions to s3c2410_wdt_variant structure fields
>         - moved calling s3c2410wdt_mask_and_disable_reset() function above s3c2410wdt_start() call in probe
>         - put dev_err message back to s3c2410wdt_mask_and_disable_reset() function
>           (suggested by Doug Anderson <dianders@xxxxxxxxxxxx>)
>
> changes since V8:
>         - modified the patch description for the below patch
>           "watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register"
>         - removed MODULE_ALIAS in watchdog driver
>         - changed dev_warn to dev_err in one failure case handling (suggested by Guenter Roeck <linux@xxxxxxxxxxxx>)
>         - renamed variable name from pmu_config to drv_data
>         - changed the compatible field description in documentation file
>           (suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>)
>
> changes since V7:
>         - re-ordered the patches in the series
>         - moved pmu_config_s3c2410 structure out of ifdef CONFIG_OF
>           and limited only this structure to platform match table
>         - renamed structure name from s3c_wdt_driver_ids to s3c2410_wdt_ids
>         - removed exynos variants from platform match table
>           (suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>)
>
> changes since V6:
>         - added SoC-specific compatible value to syscon node and documented it
>         - given more patch description for below patch
>           ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420
>         - added platform_device_id array for watchdog devices
>         - selected MFD_SYSCON in Kconfig entry for watchdog
>
> Changes since V5:
>         - removed status property in DT nodes
>         - changed the return type for the function s3c2410wdt_mask_and_disable_reset()
>           and handled error cases
>         - Handled to get driver data in non-DT cases
>         - Addressed comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>
>
> Changes since V4:
>         - changed the node name from pmusysreg to syscon and node label from pmu_sys_reg to pmu_syscon
>         - changed the property name from samsung,pmusysreg to samsung,syscon-phandle
>         - used regmap_update_bits instead of remap_read/regmap_write
>         - Addressed other comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>
>
> Changes since V3:
>         - changed the compatible strings for watchdog node
>         - splitted up adding pmusysreg node and made it separate patch
>         - Addressed comments given by Sachin Kamat <sachin.kamat@xxxxxxxxxx>
>
> Changes since V2:
>         - used syscon regmap interface to configure pmu registers in WDT driver
>           (suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>)
>
> Changes since V1:
>         - Added new compatible string for Exynos5 SoCs
>         - Introduced quirk mechanism to program PMU registers
>         - Addressed comments given by Tomasz Figa <t.figa@xxxxxxxxxxx>
>
> Leela Krishna Amudala (3):
>   ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
>   watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu
>     register
>   ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420
>
>  .../devicetree/bindings/arm/samsung/pmu.txt        |   15 ++
>  .../devicetree/bindings/watchdog/samsung-wdt.txt   |   21 ++-
>  arch/arm/boot/dts/exynos5.dtsi                     |    7 -
>  arch/arm/boot/dts/exynos5250.dtsi                  |   11 +-
>  arch/arm/boot/dts/exynos5420.dtsi                  |   14 ++
>  drivers/watchdog/Kconfig                           |    1 +
>  drivers/watchdog/s3c2410_wdt.c                     |  154 ++++++++++++++++++--
>  7 files changed, 205 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt
>
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux