Hi Anton, > From: Anton Tikhomirov [mailto:av.tikhomirov@xxxxxxxxxxx] > Sent: Tuesday, December 10, 2013 3:43 AM > > Hi Kamil, > > Same USB2.0 PHY may be used by several HCDs, for example EHCI and OHCI. > Consider the situation, when EHCI stops using the PHY and calls > power_off, then OHCI becomes non-operational. In other words, PHY > power_on and power_off calls must be balanced. > > Shall we handle it in your driver? (usage count?) Please look in the drivers/phy/phy-core.c file. Usage count is handled there - see phy_power_on and phy_power_off functions. I understand that after both EHCI and OHCI power on the phy, the usage count is 2. So powering off one of them (EHCI for instance) the usage count is still 1, so the OHCI should still work properly. [snip] Best wishes, -- Kamil Debski Samsung R&D Institute Poland -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |