Am Freitag, 13. Dezember 2013, 12:28:25 schrieb panchaxari: > Configs ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR are enabled as default > to platform S3C24XX. > > Introduction of PHYS_VIRT config as default would enable phy-to-virt and > virt-to-phy translation function at boot and module loading time > and enforce dynamic reallocation of memory. AUTO_ZRELADDR config would > enable calculation of kernel load address at run time. > > PHYS_VIRT config is mutually exclusive to XIP_KERNEL, XIP_KERNEL is used in > systems with NOR flash devices, and ZRELADDR config is mutually exclusive > to ZBOOT_ROM. > > CFT::Call For Testing > > Requesting maintainers of S3C24XX platforms to evaluate the changes on the > board and comment, as I dont have the board for testing and also requesting > an ACK the changes. > > Signed-off-by: panchaxari <panchaxari.prasannamurthy@xxxxxxxxxx> > Cc: Heiko Stuebner <heiko@xxxxxxxxx> > Cc: Ben Dooks <ben-linux@xxxxxxxxx> > Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx> > Cc: Russell King <linux@xxxxxxxxxxxxxxxx> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Cc: linux-samsung-soc@xxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx apart from the possible issue Vasily pointed out, my current kernels for s3c2442 and s3c2416 seem to work flawlessly with AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT. I just checked the configs and it seems these options get automatically selected and must be specially deselected by the user. Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |