Hi, > From: Kishon Vijay Abraham I [mailto:kishon@xxxxxx] > Sent: Monday, December 09, 2013 8:23 AM > > On Friday 06 December 2013 04:22 PM, Kamil Debski wrote: > > Hi, > > > >> From: Kishon Vijay Abraham I [mailto:kishon@xxxxxx] > >> Sent: Friday, December 06, 2013 6:31 AM > >> > >> Hi, > >> > >> On Thursday 05 December 2013 05:59 PM, Kamil Debski wrote: > >>> Previously the of_phy_get function took a struct device * and was > >>> declared static. It was impossible to call it from another driver > >>> and thus it was impossible to get phy defined > >> > >> It was never intended to be called from other drivers. What's up > with > >> the wrapper of of_phy_get, phy_get()/devm_phy_get()? Why isn't that > >> enough? > > > > Implementing support for multiple phys in the ehci driver is a bit > tricky. > > Especially when we want to do it right. Please have a look at this > > part of the dts file: > > > > + ehci@12580000 { > > + compatible = "samsung,exynos4210-ehci"; > > + reg = <0x12580000 0x20000>; > > + interrupts = <0 70 0>; > > + clocks = <&clock 304>, <&clock 305>; > > + clock-names = "usbhost", "otg"; > > + status = "disabled"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + port@0 { > > + reg = <0>; > > + phys = <&usb2phy 1>; > > + phy-names = "host"; > > + status = "disabled"; > > + }; > > + port@1 { > > + reg = <1>; > > + phys = <&usb2phy 2>; > > + phy-names = "hsic0"; > > + status = "disabled"; > > + }; > > + port@2 { > > + reg = <2>; > > + phys = <&usb2phy 3>; > > + phy-names = "hsic1"; > > + status = "disabled"; > > + }; > > + }; > > > > With the above we have a clear specification of ports and their > > respective phys. But to do this properly the ehci driver has to > > iterate over port nodes. It is much easier to use devm_of_phy_get by > > giving the node as its argument. > > I see. There are a couple of more things we do in the wrapper that gets > missed while exporting of_phy_get (get_device and try_module_get). You > might want to re-work that one. Thank you for the review. I have just sent an updated version of the core patches. Best wishes, -- Kamil Debski Samsung R&D Institute Poland -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |