From: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx>
The patch adds the DT binding doc for exynos5 SoC camera
subsystem.
Signed-off-by: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx>
Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx>
---
.../bindings/media/exynos5250-camera.txt | 136 ++++++++++++++++++++
1 file changed, 136 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/exynos5250-camera.txt
diff --git a/Documentation/devicetree/bindings/media/exynos5250-camera.txt b/Documentation/devicetree/bindings/media/exynos5250-camera.txt
new file mode 100644
index 0000000..0c36bc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos5250-camera.txt
@@ -0,0 +1,136 @@
+Samsung EXYNOS5 SoC Camera Subsystem
+------------------------------------
+
+The Exynos5 SoC Camera subsystem comprises of multiple sub-devices
+represented by separate device tree nodes. Currently this includes: FIMC-LITE,
+MIPI CSIS and FIMC-IS.
+
+The sub-device nodes are referenced using phandles in the common 'camera' node
+which also includes common properties of the whole subsystem not really
+specific to any single sub-device, like common camera port pins or the common
+camera bus clocks.
+
+Common 'camera' node
+--------------------
+
+Required properties:
+
+- compatible : must be "samsung,exynos5250-fimc"
+- clocks : list of phandles and clock specifiers, corresponding
+ to entries in the clock-names property
+- clock-names : must contain "sclk_bayer" entry
+- samsung,csis : list of phandles to the mipi-csis device nodes
+- samsung,fimc-lite : list of phandles to the fimc-lite device nodes
+- samsung,fimc-is : phandle to the fimc-is device node
+
+The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
+to define a required pinctrl state named "default".
+
+'parallel-ports' node
+---------------------
+
+This node should contain child 'port' nodes specifying active parallel video
+input ports. It includes camera A, camera B and RGB bay inputs.
+'reg' property in the port nodes specifies the input type:
+ 1 - parallel camport A
+ 2 - parallel camport B
+ 5 - RGB camera bay
+
+3, 4 are for MIPI CSI-2 bus and are already described in samsung-mipi-csis.txt
+
+Required properties:
+
+For describing the input type in the child nodes, the following properties
+have to be present in the parallel-ports node:
+- #address-cells: Must be 1
+- #size-cells: Must be 0
+
+Image sensor nodes
+------------------
+
+The sensor device nodes should be added to their control bus controller (e.g.
+I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
+using the common video interfaces bindings, defined in video-interfaces.txt.
+
+Example:
+
+ aliases {
+ fimc-lite0 = &fimc_lite_0
+ };
+
+ /* Parallel bus IF sensor */
+ i2c_0: i2c@13860000 {
+ s5k6aa: sensor@3c {
+ compatible = "samsung,s5k6aafx";
+ reg = <0x3c>;
+ vddio-supply = <...>;
+
+ clock-frequency = <24000000>;
+ clocks = <...>;
+ clock-names = "mclk";
+
+ port {
+ s5k6aa_ep: endpoint {
+ remote-endpoint = <&fimc0_ep>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+ };
+
+ /* MIPI CSI-2 bus IF sensor */
+ s5c73m3: sensor@1a {
+ compatible = "samsung,s5c73m3";
+ reg = <0x1a>;
+ vddio-supply = <...>;
+
+ clock-frequency = <24000000>;
+ clocks = <...>;
+ clock-names = "mclk";
+
+ port {
+ s5c73m3_1: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csis0_ep>;
+ };
+ };
+ };
+
+ camera {
+ compatible = "samsung,exynos5250-fimc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_port_a_clk_active>;
+
+ samsung,csis = <&csis_0>, <&csis_1>;
+ samsung,fimc-lite = <&fimc_lite_0>, <&fimc_lite_1>, <&fimc_lite_2>;
+ samsung,fimc-is = <&fimc_is>;
+
+ /* parallel camera ports */
+ parallel-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* camera A input */
+ port@1 {
+ reg = <1>;
+ camport_a_ep: endpoint {
+ remote-endpoint = <&s5k6aa_ep>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+ };
+
+MIPI-CSIS device binding is defined in samsung-mipi-csis.txt, FIMC-LITE
+device binding is defined in exynos-fimc-lite.txt and FIMC-IS binding
+is defined in exynos5-fimc-is.txt.
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
