Hi Sylwester, On Thu, Dec 12, 2013 at 9:02 PM, Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> wrote: > Hi Arun, > > (Adding Mark and Mauro to Cc) > > On 05/11/13 12:19, Arun Kumar K wrote: >> From: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx> >> >> The patch adds the DT binding doc for exynos5 SoC camera >> subsystem. >> >> Signed-off-by: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx> >> Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx> >> --- >> .../bindings/media/exynos5250-camera.txt | 126 ++++++++++++++++++++ >> 1 file changed, 126 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/media/exynos5250-camera.txt >> >> diff --git a/Documentation/devicetree/bindings/media/exynos5250-camera.txt b/Documentation/devicetree/bindings/media/exynos5250-camera.txt >> new file mode 100644 >> index 0000000..09420ba >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/exynos5250-camera.txt >> @@ -0,0 +1,126 @@ >> +Samsung EXYNOS5 SoC Camera Subsystem >> +------------------------------------ >> + >> +The Exynos5 SoC Camera subsystem comprises of multiple sub-devices >> +represented by separate device tree nodes. Currently this includes: FIMC-LITE, >> +MIPI CSIS and FIMC-IS. >> + >> +The sub-device nodes are referenced using phandles in the common 'camera' node >> +which also includes common properties of the whole subsystem not really >> +specific to any single sub-device, like common camera port pins or the common >> +camera bus clocks. >> + >> +Common 'camera' node >> +-------------------- >> + >> +Required properties: >> + >> +- compatible : must be "samsung,exynos5250-fimc" >> +- clocks : list of clock specifiers, corresponding to entries in >> + the clock-names property >> +- clock-names : must contain "sclk_bayer" entry >> +- samsung,csis : list of phandles to the mipi-csis device nodes >> +- samsung,fimc-lite : list of phandles to the fimc-lite device nodes >> +- samsung,fimc-is : phandle to the fimc-is device node >> + >> +The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used >> +to define a required pinctrl state named "default". >> + >> +'parallel-ports' node >> +--------------------- >> + >> +This node should contain child 'port' nodes specifying active parallel video >> +input ports. It includes camera A, camera B and RGB bay inputs. >> +'reg' property in the port nodes specifies the input type: >> + 1 - parallel camport A >> + 2 - parallel camport B >> + 5 - RGB camera bay >> + >> +3, 4 are for MIPI CSI-2 bus and are already described in samsung-mipi-csis.txt > > Was there posted a version of this patch with Mark's comments addressed: > http://www.spinics.net/lists/devicetree/msg11550.html ? I couldn't find it. > I think it is missed as I also couldn't find it. I can quickly send an updated patch with these reviews addressed. Regards Arun -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |