If max77686 chip is instantiated from device tree, it is desirable to
have an OF clock provider to allow device tree based look-up of clocks.
This patch adds OF clock provider registration to the clk-max77686
driver.
Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
.../devicetree/bindings/clock/maxim,max77686.txt | 38 ++++++++++++++++++++++
Documentation/devicetree/bindings/mfd/max77686.txt | 3 ++
drivers/clk/clk-max77686.c | 24 ++++++++++++++
3 files changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77686.txt
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
new file mode 100644
index 0000000..96ce71b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -0,0 +1,38 @@
+Binding for Maxim MAX77686 32k clock generator block
+
+This is a part of device tree bindings of MAX77686 multi-function device.
+More information can be found in bindings/mfd/max77686.txt file.
+
+The MAX77686 contains three 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
+Following properties should be presend in main device node of the MFD chip.
+
+Required properties:
+- #clock-cells: simple one-cell clock specifier format is used, where the
+ only cell is used as an index of the clock inside the provider. Following
+ indices are allowed:
+ - 0: 32khz_ap clock,
+ - 1: 32khz_cp clock,
+ - 2: 32khz_pmic clock.
+
+Example: Node of the MFD chip
+
+ max77686: max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ /* ... */
+ };
+
+Example: Clock consumer node
+
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clock-names = "my-clock";
+ clocks = <&max77686 2>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index c6a3469..678f3cf 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -7,6 +7,9 @@ different i2c slave address,presently for which we are statically creating i2c
client while probing.This document describes the binding for mfd device and
PMIC submodule.
+Binding for the built-in 32k clock generator block is defined separately
+in bindings/clk/maxim,max77686.txt file.
+
Required properties:
- compatible : Must be "maxim,max77686";
- reg : Specifies the i2c slave address of PMIC block.
diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
index 3cf38dc..3d7e8dd 100644
--- a/drivers/clk/clk-max77686.c
+++ b/drivers/clk/clk-max77686.c
@@ -169,6 +169,26 @@ static int max77686_clk_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, clocks);
+ if (iodev->dev->of_node) {
+ struct clk_onecell_data *of_data;
+
+ of_data = devm_kzalloc(&pdev->dev,
+ sizeof(*of_data), GFP_KERNEL);
+ if (!of_data) {
+ ret = -ENOMEM;
+ goto err_clocks;
+ }
+
+ of_data->clks = clocks;
+ of_data->clk_num = MAX77686_CLKS_NUM;
+ ret = of_clk_add_provider(iodev->dev->of_node,
+ of_clk_src_onecell_get, of_data);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register OF clock provider\n");
+ goto err_clocks;
+ }
+ }
+
return 0;
err_clocks:
@@ -182,9 +202,13 @@ err_clocks:
static int max77686_clk_remove(struct platform_device *pdev)
{
+ struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct clk **clocks = platform_get_drvdata(pdev);
int i;
+ if (iodev->dev->of_node)
+ of_clk_del_provider(iodev->dev->of_node);
+
for (i = 0; i < MAX77686_CLKS_NUM; i++) {
struct clk_hw *hw = __clk_get_hw(clocks[i]);
struct max77686_clk *max77686 = to_max77686_clk(hw);
--
1.8.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
