The GSC_SRC_FMT, GSC_DST_FMT flags are currently set in VIDIOC_S_FMT ioctl
and cleared in VIDIOC_REQBUFS(0). In between the flags are used to figure out
if scaling ratio check need to be performed. This an incorrect behaviour as
it should be assumed there is always a valid configuration on a video device.
Fix this by removing those flags and also remove an unused 'frame' local
variable.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
---
drivers/media/platform/exynos-gsc/gsc-core.c | 10 ++----
drivers/media/platform/exynos-gsc/gsc-core.h | 2 -
drivers/media/platform/exynos-gsc/gsc-m2m.c | 46 +++++++++-----------------
3 files changed, 19 insertions(+), 39 deletions(-)
diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
index 9d0cc04..d0bba73 100644
--- a/drivers/media/platform/exynos-gsc/gsc-core.c
+++ b/drivers/media/platform/exynos-gsc/gsc-core.c
@@ -698,7 +698,6 @@ static int __gsc_s_ctrl(struct gsc_ctx *ctx, struct v4l2_ctrl *ctrl)
{
struct gsc_dev *gsc = ctx->gsc_dev;
struct gsc_variant *variant = gsc->variant;
- unsigned int flags = GSC_DST_FMT | GSC_SRC_FMT;
int ret = 0;
if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE)
@@ -714,18 +713,15 @@ static int __gsc_s_ctrl(struct gsc_ctx *ctx, struct v4l2_ctrl *ctrl)
break;
case V4L2_CID_ROTATE:
- if ((ctx->state & flags) == flags) {
- ret = gsc_check_scaler_ratio(variant,
+ ret = gsc_check_scaler_ratio(variant,
ctx->s_frame.crop.width,
ctx->s_frame.crop.height,
ctx->d_frame.crop.width,
ctx->d_frame.crop.height,
ctx->gsc_ctrls.rotate->val,
ctx->out_path);
-
- if (ret)
- return -EINVAL;
- }
+ if (ret < 0)
+ return ret;
ctx->rotation = ctrl->val;
break;
diff --git a/drivers/media/platform/exynos-gsc/gsc-core.h b/drivers/media/platform/exynos-gsc/gsc-core.h
index 76435d3..c79b3cb 100644
--- a/drivers/media/platform/exynos-gsc/gsc-core.h
+++ b/drivers/media/platform/exynos-gsc/gsc-core.h
@@ -41,8 +41,6 @@
#define DEFAULT_CSC_RANGE 1
#define GSC_PARAMS (1 << 0)
-#define GSC_SRC_FMT (1 << 1)
-#define GSC_DST_FMT (1 << 2)
#define GSC_CTX_M2M (1 << 3)
#define GSC_CTX_STOP_REQ (1 << 6)
diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c
index 48e1c34..78bcb92 100644
--- a/drivers/media/platform/exynos-gsc/gsc-m2m.c
+++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c
@@ -341,11 +341,7 @@ static int gsc_m2m_s_fmt_mplane(struct file *file, void *fh,
frame->payload[i] = pix->plane_fmt[i].sizeimage;
gsc_set_frame_size(frame, pix->width, pix->height);
-
- if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- gsc_ctx_state_lock_set(GSC_PARAMS | GSC_DST_FMT, ctx);
- else
- gsc_ctx_state_lock_set(GSC_PARAMS | GSC_SRC_FMT, ctx);
+ gsc_ctx_state_lock_set(GSC_PARAMS, ctx);
pr_debug("f_w: %d, f_h: %d", frame->f_width, frame->f_height);
@@ -357,22 +353,14 @@ static int gsc_m2m_reqbufs(struct file *file, void *fh,
{
struct gsc_ctx *ctx = fh_to_ctx(fh);
struct gsc_dev *gsc = ctx->gsc_dev;
- struct gsc_frame *frame;
u32 max_cnt;
max_cnt = (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) ?
gsc->variant->in_buf_cnt : gsc->variant->out_buf_cnt;
if (reqbufs->count > max_cnt) {
return -EINVAL;
- } else if (reqbufs->count == 0) {
- if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
- gsc_ctx_state_lock_clear(GSC_SRC_FMT, ctx);
- else
- gsc_ctx_state_lock_clear(GSC_DST_FMT, ctx);
}
- frame = ctx_get_frame(ctx, reqbufs->type);
-
return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs);
}
@@ -527,24 +515,22 @@ static int gsc_m2m_s_selection(struct file *file, void *fh,
}
/* Check to see if scaling ratio is within supported range */
- if (gsc_ctx_state_is_set(GSC_DST_FMT | GSC_SRC_FMT, ctx)) {
- if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
- ret = gsc_check_scaler_ratio(variant, cr.c.width,
- cr.c.height, ctx->d_frame.crop.width,
- ctx->d_frame.crop.height,
- ctx->gsc_ctrls.rotate->val, ctx->out_path);
- } else {
- ret = gsc_check_scaler_ratio(variant,
- ctx->s_frame.crop.width,
- ctx->s_frame.crop.height, cr.c.width,
- cr.c.height, ctx->gsc_ctrls.rotate->val,
- ctx->out_path);
- }
+ if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+ ret = gsc_check_scaler_ratio(variant, cr.c.width,
+ cr.c.height, ctx->d_frame.crop.width,
+ ctx->d_frame.crop.height,
+ ctx->gsc_ctrls.rotate->val, ctx->out_path);
+ } else {
+ ret = gsc_check_scaler_ratio(variant,
+ ctx->s_frame.crop.width,
+ ctx->s_frame.crop.height, cr.c.width,
+ cr.c.height, ctx->gsc_ctrls.rotate->val,
+ ctx->out_path);
+ }
- if (ret) {
- pr_err("Out of scaler range");
- return -EINVAL;
- }
+ if (ret < 0) {
+ pr_err("Out of scaler range");
+ return ret;
}
frame->crop = cr.c;
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
