Hi, On Friday, October 11, 2013 11:10:38 AM Eduardo Valentin wrote: > Hi Naveen, > > On 09-10-2013 10:03, Bartlomiej Zolnierkiewicz wrote: > > > > Hi, > > > > All patches (#1-#3) look good to me, FWIW you can add: > > > > Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx> > > > > Please note that (at least) patch #3 conflicts with Lukasz's EXYNOS4412 > > fixup patchset: > > > > https://lkml.org/lkml/2013/10/9/35 > > > > It is up to Eduardo to resolve this but it probably would be better to > > merge EXYNOS4412 fixes first and then add EXYNOS5420 support. This would > > require you to port patch #3 over Lukasz's patchset though. > > My question is if this fix applies also to EXYNOS4412, as it is not > mentioned in the patch description and the change affects all supported This patch doesn't affect EXYNOS4210 as exynos4210_tmu_registers struct uses the default zero value for inten_fall_mask, inten_fall_shift and intclr_fall_shift. > chip version deliberately. Has this change been validated on all > supported chip versions? > > Amit, I saw you ack, but still, it is not clear how this change behaves > across supported hardware. For EXYNOS4412 and EXYNOS5250 this patch doesn't cause any functionality changes because while the patch changes inten_fall_shift usage to intclr_fall_shift one in exynos_tmu_initialize() it defines EXYNOS_TMU_CLEAR_FALL_INT_SHIFT to 12 (old EXYNOS_TMU_FALL_INT_SHIFT value). This patch only changes driver behavior for EXYNOS5440 on which the used shift value changes from 4 to 12. PS I've only noticed it now but after this patch inten_fall_shift becomes unused and can be removed. Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics > > > > Best regards, > > -- > > Bartlomiej Zolnierkiewicz > > Samsung R&D Institute Poland > > Samsung Electronics > > > > On Wednesday, October 09, 2013 05:38:27 PM Naveen Krishna Chatradhi wrote: > >> The FALL interrupt related en, status bits are available at an offset of > >> 16 on INTEN, INTSTAT registers and at an offset of > >> 12 on INTCLEAR register. > >> > >> This patch corrects the same for exyns5250 and exynos5440 > >> > >> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx> > >> --- > >> Changes since v1: > >> Changes since v2: > >> Changes since v3: > >> None > >> > >> drivers/thermal/samsung/exynos_tmu.c | 2 +- > >> drivers/thermal/samsung/exynos_tmu.h | 2 ++ > >> drivers/thermal/samsung/exynos_tmu_data.c | 2 ++ > >> drivers/thermal/samsung/exynos_tmu_data.h | 3 ++- > >> 4 files changed, 7 insertions(+), 2 deletions(-) > >> > >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > >> index b43afda..af69209 100644 > >> --- a/drivers/thermal/samsung/exynos_tmu.c > >> +++ b/drivers/thermal/samsung/exynos_tmu.c > >> @@ -265,7 +265,7 @@ skip_calib_data: > >> data->base + reg->threshold_th1); > >> > >> writel((reg->inten_rise_mask << reg->inten_rise_shift) | > >> - (reg->inten_fall_mask << reg->inten_fall_shift), > >> + (reg->inten_fall_mask << reg->intclr_fall_shift), > >> data->base + reg->tmu_intclear); > >> > >> /* if last threshold limit is also present */ > >> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h > >> index b364c9e..7c6c34a 100644 > >> --- a/drivers/thermal/samsung/exynos_tmu.h > >> +++ b/drivers/thermal/samsung/exynos_tmu.h > >> @@ -134,6 +134,7 @@ enum soc_type { > >> * @inten_fall3_shift: shift bits of falling 3 interrupt bits. > >> * @tmu_intstat: Register containing the interrupt status values. > >> * @tmu_intclear: Register for clearing the raised interrupt status. > >> + * @intclr_fall_shift: shift bits for interrupt clear fall 0 > >> * @emul_con: TMU emulation controller register. > >> * @emul_temp_shift: shift bits of emulation temperature. > >> * @emul_time_shift: shift bits of emulation time. > >> @@ -204,6 +205,7 @@ struct exynos_tmu_registers { > >> u32 tmu_intstat; > >> > >> u32 tmu_intclear; > >> + u32 intclr_fall_shift; > >> > >> u32 emul_con; > >> u32 emul_temp_shift; > >> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c > >> index 9002499..23fea23 100644 > >> --- a/drivers/thermal/samsung/exynos_tmu_data.c > >> +++ b/drivers/thermal/samsung/exynos_tmu_data.c > >> @@ -122,6 +122,7 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = { > >> .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, > >> .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, > >> .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, > >> + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, > >> .emul_con = EXYNOS_EMUL_CON, > >> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, > >> .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, > >> @@ -210,6 +211,7 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { > >> .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, > >> .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, > >> .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, > >> + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, > >> .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, > >> .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, > >> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, > >> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h > >> index dc7feb5..8788a87 100644 > >> --- a/drivers/thermal/samsung/exynos_tmu_data.h > >> +++ b/drivers/thermal/samsung/exynos_tmu_data.h > >> @@ -69,9 +69,10 @@ > >> #define EXYNOS_TMU_RISE_INT_MASK 0x111 > >> #define EXYNOS_TMU_RISE_INT_SHIFT 0 > >> #define EXYNOS_TMU_FALL_INT_MASK 0x111 > >> -#define EXYNOS_TMU_FALL_INT_SHIFT 12 > >> +#define EXYNOS_TMU_FALL_INT_SHIFT 16 > >> #define EXYNOS_TMU_CLEAR_RISE_INT 0x111 > >> #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) > >> +#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12 > >> #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 > >> #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 > >> #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |