On Monday, September 23, 2013 12:38 PM, Vivek Gautam wrote: > > This delay got introduced in: > "7415f17 usb: dwc3: core: add power management support" > which reflected similar code in dwc3_core_soft_reset() function. > However, originally the delay of 100ms in dwc3_core_soft_reset() was > meant to assist USB2PHY and USB3PHY reset, not for usb_phy_init() > sequence. > > We should get rid of this delay, since things will still work > fine without this. > > Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> Reviewed-by: Jingoo Han <jg1.han@xxxxxxxxxxx> OK, I see. There is no reason to add msleep(100) to dwc3_resume(); thus, this msleep(100) can be removed. Best regards, Jingoo Han > --- > > Hi Felipe, > > I remember this change for phy_init including msleep(100) was > suggested by me, after testing the patch-series for PM support > to dwc3. > Sorry for that !! > > drivers/usb/dwc3/core.c | 1 - > 1 files changed, 0 insertions(+), 1 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 474162e..e88ffae 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -691,7 +691,6 @@ static int dwc3_resume(struct device *dev) > > usb_phy_init(dwc->usb3_phy); > usb_phy_init(dwc->usb2_phy); > - msleep(100); > > spin_lock_irqsave(&dwc->lock, flags); > > -- > 1.7.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html